Isolation

Knife Gate Valves - MF Series | Wey Valves - Wey Valves

Knife Gate Valves - MF Series | Wey Valves

Knife Gate Valves - MF Series | Wey Valves
Wey Valves
WEY MF Knife Gate Valve – Central Flange Design The WEY MF series is a bidirectional isolation valve for liquids, sludge, slurry, powders and granular media. Its body geometry limits solids accumulation around the gate guides, while the gate is mechanically supported throughout its travel and in the closed position. Technical Data Nominal sizes:...
View
Knife Gate Valves - MG Series | Wey Valves - Wey Valves

Knife Gate Valves - MG Series | Wey Valves

Knife Gate Valves - MG Series | Wey Valves
Wey Valves
WEY MG Knife Gate Valve – PN16 Service The WEY MG series is a bidirectional isolation valve for liquids, sludge, slurry, powders and granular media. It retains the compact EN 558 Series 20 face-to-face dimension while covering operating pressures up to 16 bar. The gate is guided throughout its travel and mechanically supported in the closed position....
View
Knife Gate Valves - MH Series | Wey Valves - Wey Valves

Knife Gate Valves - MH Series | Wey Valves

Knife Gate Valves - MH Series | Wey Valves
Wey Valves
WEY MH Knife Gate Valve – PN25 Service The WEY MH series is a bidirectional isolation valve for slurry, sludge, viscous products and solids-bearing media at pressures up to 25 bar. The gate is guided throughout its travel and mechanically supported in the closed position to limit deformation under differential pressure. Technical Data Nominal sizes:...
View
Knife Gate Valves - FB Series | Wey Valves - Wey Valves

Knife Gate Valves - FB Series | Wey Valves

Knife Gate Valves - FB Series | Wey Valves
Wey Valves
WEY FB Knife Gate Valve – Full Bore Design The WEY FB series is a bidirectional isolation valve for pipelines requiring pigging or mechanical cleaning. Its full-bore geometry keeps the internal passage aligned with the nominal pipe diameter, while the gate guides remain outside the flow path. From DN200 upward, brass scrapers remove deposits from the gate...
View
Knife Gate Valves - W Series | Wey Valves - Wey Valves

Knife Gate Valves - W Series | Wey Valves

Knife Gate Valves - W Series | Wey Valves
Wey Valves
WEY W Knife Gate Valve – Heavy-Duty Full-Flange Design The WEY W series is a bidirectional full-flange isolation valve for high differential pressures and abrasive or corrosive process media. The gate is guided throughout its travel and mechanically supported in the closed position. The body geometry directs solids away from the guide areas and back into...
View
Knife Gate Valves - DB Series | Wey Valves - Wey Valves

Knife Gate Valves - DB Series | Wey Valves

Knife Gate Valves - DB Series | Wey Valves
Wey Valves
WEY DB Knife Gate Valve – Double Block & Bleed The WEY DB series is designed for positive isolation of pipelines carrying hazardous, corrosive or contamination-sensitive media. Two gates operate through a common actuator, creating two independent sealing points. The intermediate cavity includes connections for venting, draining or flushing, allowing...
View
Knife Gate Valves - DP Series | Wey Valves - Wey Valves

Knife Gate Valves - DP Series | Wey Valves

Knife Gate Valves - DP Series | Wey Valves
Wey Valves
WEY DP Knife Gate Valve – O-Port Design The WEY DP series is a bidirectional isolation valve for media containing solids, long fibres or sedimenting particles. Its through-going O-Port gate moves across the full media column during closing, reducing the risk of solids packing in the seat area and limiting gate obstruction. Technical Data Nominal sizes:...
View
Knife Gate Valves - HD Series | Wey Valves - Wey Valves

Knife Gate Valves - HD Series | Wey Valves

Knife Gate Valves - HD Series | Wey Valves
Wey Valves
WEY HD Knife Gate Valve – High-Pressure Service The WEY HD series is designed for isolation of high-pressure pipelines carrying slurry, sludge and media containing suspended or settling solids. Process pressure supports the seat sealing function, while the enclosed bonnet limits leakage to atmosphere and can be equipped with flushing connections for...
View
Knife Gate Valves - HSI Series | Wey Valves - Wey Valves

Knife Gate Valves - HSI Series | Wey Valves

Knife Gate Valves - HSI Series | Wey Valves
Wey Valves
WEY HSI Knife Gate Valve – High-Speed Isolation The WEY HSI series is designed for explosion isolation in pipelines carrying combustible dust or gas-air mixtures. After receiving a signal from the explosion detection system, the pneumatic mechanism releases air from the integrated reservoir and closes the gate before the pressure or flame front reaches...
View
Knife Gate Valves - TI3 Series | Wey Valves - Wey Valves

Knife Gate Valves - TI3 Series | Wey Valves

Knife Gate Valves - TI3 Series | Wey Valves
Wey Valves
WEY TI3 Knife Gate Valve – Level Transmitter Isolation The WEY TI3 series is designed to isolate differential-pressure level transmitters installed on slurry tanks. Its short face-to-face dimension reduces the dead volume between the vessel and the instrument, limiting solids accumulation that may cause blocked connections or inaccurate level readings....
View
Knife Gate Valves - VK Series | Wey Valves - Wey Valves

Knife Gate Valves - VK Series | Wey Valves

Knife Gate Valves - VK Series | Wey Valves
Wey Valves
WEY VK Knife Gate Valve – Square and Rectangular Ports The WEY VK series is a bidirectional isolation valve for square or rectangular ducts, silo outlets and hopper connections. The gate is mechanically guided throughout its travel, while body recesses allow displaced solids to move away from the sealing area during closing. In the closed position, the...
View
Knife Gate Valves - SG Series | Wey Valves - Wey Valves

Knife Gate Valves - SG Series | Wey Valves

Knife Gate Valves - SG Series | Wey Valves
Wey Valves
WEY SG Knife Gate Valve – Heavy-Duty O-Port Design The WEY SG series is a full-flanged isolation valve for media containing high solids concentrations, long fibres or compacting material. Its through-going O-Port gate cuts across the static media column during closing. The four-column actuator frame absorbs the increased axial loads generated during...
View
Butterfly valve double offset Type 401N | Sirca - Sirca International

Butterfly valve double offset Type 401N | Sirca

Butterfly valve double offset Type 401N | Sirca
Sirca International
Sirca 401N Double-Offset Butterfly Valve The Sirca 401N is a double-offset butterfly valve for industrial isolation and controlled throttling duties. The offset shaft geometry moves the disc away from the seat during the initial opening movement, reducing seat friction, operating torque and sealing-surface wear compared with concentric butterfly valves....
View
Butterfly valve Wafer/Lug Type 301E | Sirca - Sirca International

Butterfly valve Wafer/Lug Type 301E | Sirca

Butterfly valve Wafer/Lug Type 301E | Sirca
Sirca International
Sirca 301E Wafer/Lug Butterfly Valve The Sirca 301E is a resilient-seated, bidirectional butterfly valve used for isolation and flow control in industrial liquid and gas systems. It is available in wafer and lug body configurations, covering nominal sizes from DN40 to DN1000. Technical Data Maximum operating pressure: up to 20 bar, depending on...
View
Butterfly valve Wafer/Lug Type 301TSS | Sirca - Sirca International

Butterfly valve Wafer/Lug Type 301TSS | Sirca

Butterfly valve Wafer/Lug Type 301TSS | Sirca
Sirca International
Sirca 301TSS Wafer/Lug Butterfly Valve The Sirca 301TSS is a bidirectional butterfly valve with a PTFE seat, designed for isolation and flow-control duties involving corrosive or chemically aggressive fluids. The standard wetted trim consists of an AISI 316 stainless-steel disc and stems. Operating Data Size range: DN40–DN400 Temperature...
View
Butterfly valve Wafer/Lug Type 301TT | Sirca - Sirca International

Butterfly valve Wafer/Lug Type 301TT | Sirca

Butterfly valve Wafer/Lug Type 301TT | Sirca
Sirca International
Sirca 301TT Wafer/Lug Butterfly Valve The Sirca 301TT is a bidirectional butterfly valve with PTFE-lined wetted surfaces, intended for isolation and flow-control duties involving corrosive or chemically aggressive fluids. It is available in wafer and lug configurations for installation between industrial pipeline flanges. Operating Data Size range:...
View
Butterfly valve triple offset Type 501M | Sirca - Sirca International

Butterfly valve triple offset Type 501M | Sirca

Butterfly valve triple offset Type 501M | Sirca
Sirca International
Sirca 501M Triple-Offset Butterfly Valve The Sirca 501M is a metal-seated, triple-offset butterfly valve for isolation and controlled throttling in high-pressure, high-temperature and cryogenic process systems. Its offset geometry separates the sealing ring from the body seat immediately after opening begins, reducing friction, wear and operating torque....
View
Ball Valves - S10 Series | Sirca - Sirca International

Ball Valves - S10 Series | Sirca

Ball Valves - S10 Series | Sirca
Sirca International
Sirca S10 Series Flanged Ball Valve The Sirca S10 is a full-bore, wafer-pattern flanged ball valve for bidirectional isolation of clean liquids and gases in industrial piping systems. Its compact one-piece body reduces installation length, while the enlarged ball passage limits pressure loss through the valve. Technical Data Size range: DN15–DN200...
View
Ball Valve - S30 Series | Sirca - Sirca International

Ball Valve - S30 Series | Sirca

Ball Valve - S30 Series | Sirca
Sirca International
Sirca S30 Series Two-Piece Ball Valve The Sirca S30 is a full-bore, flanged ball valve with a two-piece split-body construction. It is designed primarily for bidirectional on/off isolation in industrial piping systems. The floating-ball arrangement uses differential pressure to load the downstream seat and provide tight shut-off. Technical Data...
View
Ball Valve Trunnion Mounted - S30T Series | Sirca - Sirca International

Ball Valve Trunnion Mounted - S30T Series | Sirca

Ball Valve Trunnion Mounted - S30T Series | Sirca
Sirca International
Sirca S30T Trunnion-Mounted Ball Valve The Sirca S30T is a full-bore, trunnion-mounted ball valve for on/off isolation in high-pressure liquid and gas pipelines. The ball is mechanically supported by the stem and lower trunnion, while spring-loaded seats maintain contact with the ball. This arrangement reduces operating torque compared with floating-ball...
View
Ball Valve - S20 Series | Sirca - Sirca International

Ball Valve - S20 Series | Sirca

Ball Valve - S20 Series | Sirca
Sirca International
Sirca S20 Series Two-Piece Ball Valve The Sirca S20 is a two-piece, full-bore ball valve for bidirectional on/off isolation of clean liquids and gases. Its compact body is machined from carbon-steel or stainless-steel bar stock and is available with threaded connections. The enlarged ball passage reduces pressure loss compared with reduced-bore designs....
View
Ball Valve - S40 Series | Sirca - Sirca International

Ball Valve - S40 Series | Sirca

Ball Valve - S40 Series | Sirca
Sirca International
Sirca S40 Series Two-Piece Ball Valve The Sirca S40 is a two-piece, full-bore threaded ball valve for bidirectional on/off isolation of water and compressed air. Its compact brass construction is intended for utility piping, HVAC circuits and general industrial services. The valve should normally operate fully open or fully closed rather than in...
View
Ball Valve - S50 Series | Sirca - Sirca International

Ball Valve - S50 Series | Sirca

Ball Valve - S50 Series | Sirca
Sirca International
Sirca S50 Series Two-Piece Ball Valve The Sirca S50 is a full-bore, two-piece stainless-steel ball valve for bidirectional on/off isolation. Its threaded construction is used in industrial utility lines, water systems, compressed-air networks and compatible chemical services. Operating Data Size range: 1/4″–4″ Maximum nominal pressure: PN63...
View
Ball Valve - S60 Series | Sirca - Sirca International

Ball Valve - S60 Series | Sirca

Ball Valve - S60 Series | Sirca
Sirca International
Sirca S60 Series Three-Piece Ball Valve The Sirca S60 is a full-bore, three-piece stainless-steel ball valve for bidirectional on/off isolation. Its removable centre section allows access to the ball, seats and body seals while the end connections remain installed in the pipeline, reducing pipework disturbance during maintenance. Operating Data Size...
View
Showing 505-528 of 530 item(s)
Related posts
EN 13774 Valves for Gas Distribution Systems up to 16 bar
EN 13774 Valves for Gas Distribution Systems up to 16 bar
Posted in: Technical Standards Library, European EN Standards
06/19/2026
EN 13774 is the European standard specifying performance requirements for metallic isolating valves used in gas...
Read more
EN 12569 Industrial Valves Terminology Standard
EN 12569 Industrial Valves Terminology Standard
Posted in: Technical Standards Library, European EN Standards
06/19/2026
EN 12569 is the European standard that establishes standardized terminology for industrial valves. The objective of...
Read more
EN 12516 Industrial Valve Design Strength Standard
EN 12516 Industrial Valve Design Strength Standard
Posted in: Technical Standards Library, European EN Standards
06/19/2026
EN 12516 is the primary European standard governing the strength design of industrial valves. It defines...
Read more
EN 10204 – Inspection Documents for Industrial Valves and Process Equipment
EN 10204 – Inspection Documents for Industrial Valves and Process Equipment
Posted in: Technical Standards Library, European EN Standards
06/13/2026
EN 10204 is the European standard that defines the different types of inspection documents supplied with metallic...
Read more
Isolation