Isolation

Valvosider Pressure Seal Globe Valve per ASME The Valvosider Pressure Seal ASME is a straight-flow globe valve designed for high-pressure lines, primarily for steam, hot water, condensates, and industrial fluids compatible with carbon, alloy, or stainless steel bodies. The series covers Class 600, 900, 1500, and 2500, with sizes ranging from 2" to 16"...

View

Globe Valve Pressure Seal - DIN | Valvosider

Valvosider Pressure Seal Globe Valve per DIN The Valvosider Pressure Seal DIN is a straight-flow globe valve designed for high-pressure lines, primarily for steam, hot water, condensates, and industrial fluids compatible with carbon/alloy steel bodies. The series covers PN100, PN160, PN250, PN320, and PN420, with DN50–DN600 per figure P162–P166....

View

Globe Valve Y-Type Pressure Seal - ASME | Valvosider

Y-Type Pressure Seal Valvosider per ASME The Valvosider Y-Type Pressure Seal is an angled flow globe valve designed for high-pressure lines in steam, hot water, condensates, and process fluids. The Y geometry reduces pressure loss compared to conventional straight globe valves, while the pressure seal bonnet utilizes internal pressure to compress the...

View

Globe Valve Y-Type Bolted Bonnet - ASME | Valvosider

Y-Type Valvosider Steam Valve per ASME The Valvosider Y-Type is an oblique flow globe valve featuring a bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and swivel plug disc. The Y geometry is selected for isolation or controlled throttling with reduced flow resistance compared to conventional straight globe valves. Pressure...

View

Globe Valve Y-Type Pressure Seal - DIN | Valvosider

Y-Type Pressure Seal Valvosider per DIN The Valvosider Y-Type Pressure Seal is an angled flow globe valve designed for high-pressure lines in steam, hot water, condensates, and industrial fluids compatible with the body materials. The Y geometry reduces pressure loss compared to conventional straight globe valves while maintaining a seat/disc arrangement...

View

Globe Valve Y-Type Bolted Bonnet - DIN | Valvosider

Y-type Steam Trap Valvosider per DIN The Valvosider Y-type is an oblique flow globe valve featuring a bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and loose disc. The Y configuration reduces hydraulic resistance compared to a straight globe valve, while maintaining isolation or throttling capabilities when an appropriate disc is...

View

Globe Valve Y Type Bellow Seal - DIN | Valvosider

Valvosider Y-Type DIN — Globe Valve with Bellow Seal The Valvosider Y-Type Bellow Seal per DIN is a globe valve with an angled flow path. The Y geometry reduces local resistance compared to a traditional straight globe valve, maintaining its primary function: isolation and, with the appropriate disc, limited throttling. Suitable for steam, condensates,...

View

Cryogenic Globe Valve - ASME | Valvosider

Cryogenic Globe Valve Valvosider per ASME Globe valve with extended bonnet for cryogenic lines, ensuring the packing remains thermally isolated from low-temperature zones. Features include bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and swivel plug disc. Construction Range ASME Class 150 / 300 / 600: 2"–16" ASME Class 900...

View

Cryogenic Globe Valve - DIN | Valvosider

Cryogenic Globe Valve Valvosider per DIN The Valvosider DIN cryogenic globe valve features an extended bonnet for flow isolation at low temperatures, ensuring the packing is distanced from the cold zone of the piping. The construction includes a bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and loose disc. Range and Materials...

View

Gate Valve - Pressure Seal - ASME | Valvosider

Valvosider Pressure Seal Gate Valve per ASME The Valvosider Pressure Seal ASME is a metal-seated gate valve designed for flow isolation in high-pressure lines such as steam, superheated steam, boiler feedwater, condensates, thermal fluids, and process gases. It is intended for on/off service; throttling is not recommended as a partially open position...

View

Gate Valve - Pressure Seal - Parallel Slide - ASME | Valvosider

Valvosider Pressure Seal Parallel Slide Gate Valve per ASME The Valvosider Pressure Seal Parallel Slide ASME is a metal-seated gate valve designed for flow isolation under high pressure and temperature conditions, primarily used in steam, superheated steam, boiler feedwater, condensates, and thermal circuits. It is not intended for throttling; operation...

View

Gate Valve - Through Conduit - ASME | Valvosider

Valvosider Through Conduit Gate Valve per ASME The Valvosider Through Conduit is a full-bore gate valve designed for flow isolation in liquid and gas pipelines, primarily used in oil & gas, terminals, refineries, and transmission lines where minimal flow disruption is required. The parallel slab gate design differs from wedge gate valves and is not...

View

Ball Valve Floating Ball | Fluitek

Fluitek Floating Ball Valve Two-way floating ball valve for on/off isolation in industrial liquid and gas services. Line pressure pushes the ball against the downstream seat, generating the sealing load required for tight shut-off. Construction Two-piece or three-piece body, bolted or threaded construction Materials: carbon steel, stainless steel,...

View

Ball Valve Trunnion Mounted Side Entry | Fluitek

Fluitek Side Entry Trunnion Mounted Ball Valve Side-entry trunnion mounted ball valve designed for primary isolation in high-pressure liquid or gas pipelines. The ball is mechanically supported by a shaft and trunnion, reducing seat loading compared to floating designs and enabling use in large DN or high differential pressure applications. Design and...

View

Ball Valve Trunnion Mounted Top Entry | Fluitek

Fluitek Trunnion Mounted Top Entry Ball Valve Trunnion mounted top-entry ball valve designed for primary isolation in high-pressure liquid or gas pipelines. The top-entry construction allows access to internal components from above, without removing the valve from the line. This is particularly relevant for buried, insulated, or otherwise inaccessible...

View

Ball Valve Trunnion Mounted Welded Body | Fluitek

Fluitek Trunnion Mounted Welded Body Ball Valve Trunnion mounted ball valve with welded body construction, designed for liquid and gas isolation in oil & gas, chemical, and industrial pipeline applications. The welded body minimizes mechanical joints, reducing potential external leakage paths, and is typically selected for pipelines where body joint...

View

Ball Valve Floating Ball - Cast End Entry, Side Entry Soft-seated | Neway

Neway Floating Ball Valve, Soft-Seated The Neway Floating soft-seated ball valve is a cast, end-entry or side-entry isolation valve for on/off service in industrial process lines. The floating ball design is typically applied in small and medium bore sizes where bidirectional tight shut-off is required and the process conditions are compatible with...

View

Ball Valve Floating Ball - Metal-sealed Floating Ball Valve | Neway

Neway Floating Ball Valve, Metal-Seated The Neway floating metal-seated ball valve is a cast isolation valve for services where PTFE, RPTFE or other soft seats are not suitable because of temperature, solids, erosion or seat wear. The range covers DN15–DN200 / 1/2"–8", with ASME Class 150–2500 / PN16–PN420 ratings. Construction and End...

View

Ball Valve Floating Ball - Forged Side Entry Soft-seated | Neway

Neway Floating Ball Valve, Forged Side-Entry The Neway floating forged side-entry ball valve is a soft-seated isolation valve for industrial piping where forged pressure-containing parts, higher pressure classes, or defined material specifications are required. Typical sizes are DN15–DN150 / 1/2"–6", with ratings from ASME Class 150–2500 / PN16–PN420....

View

Ball Valve Trunnion Mounted Side Entry Soft-seated | Neway

Neway Trunnion Mounted Side Entry Soft-Seated Ball Valve Trunnion-mounted, side-entry ball valve with soft seats, designed for on/off isolation in liquid or gas pipelines. Manufactured in accordance with API 6D, available in two-piece or three-piece split body construction. Size range: 2"–60" / DN50–DN1500, ASME Class 150–2500 / PN16–PN420. Temperature...

View

Ball Valve Trunnion Mounted Top Entry Soft-seated | Neway

Neway Trunnion Mounted Top Entry Soft-Seated Ball Valve Trunnion-mounted, top-entry ball valve with soft seats, designed for on/off isolation in large-diameter or high-pressure liquid and gas pipelines. API 6D construction allows internal access from the top, enabling maintenance without removing the valve from the line. Technical Data Sizes: 2"–60" /...

View

Ball Valve Trunnion Mounted Fully Welded | Neway

Neway Trunnion Mounted Fully Welded Ball Valve Trunnion mounted ball valve with fully welded body, designed for isolation service in liquid or gas pipelines. Available in sizes 2"–60", pressure classes ASME Class 150–1500 / PN16–PN250, carbon steel body material, end connections butt weld (BW) or flanged. Actuation options include manual, pneumatic,...

View

Ball Valve Trunnion Mounted - Side Entry Metal-seated | Neway