Isolation

Ball Valve 2530 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 2530 Series | 4G Ghidini

Ball Valve 2530 Series | 4G Ghidini
4G Ghidini
Ghidini 2530 4G 2-Way Ball Valve Type 2530 is a 2-way, full-bore ball valve in AISI 316L / 1.4404 stainless steel. It has female/female ISO 228-1 threaded connections with rotating threaded flanges and an ISO 5211 / DIN 3337 top flange for actuator mounting. The standard version uses “Standard Seals” and is intended for automated on/off isolation in...
View
Ball Valve 4001 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 4001 Series | 4G Ghidini

Ball Valve 4001 Series | 4G Ghidini
4G Ghidini
Ghidini 4001 4G 2-Way Jacketed Ball Valve The Ghidini 4001 is a 2-way, full-bore, wafer-pattern ball valve with a heating jacket. It is used on process lines where the fluid must be kept within a controlled temperature range to prevent solidification, excessive viscosity increase, or product hold-up around the valve body. Technical Characteristics...
View
Ball Valve 4030 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 4030 Series | 4G Ghidini

Ball Valve 4030 Series | 4G Ghidini
4G Ghidini
Ghidini 4030 4G Two-Way Ball Valve The Ghidini 4030 is a full-bore wafer-pattern ball valve with an ISO 5211 top flange for actuator mounting. It is used where automated on/off isolation is required in process lines. The body is available as a flat-body version machined from bar stock or with a heating jacket for media that must be kept above a minimum...
View
Ball Valve 6060 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 6060 Series | 4G Ghidini

Ball Valve 6060 Series | 4G Ghidini
4G Ghidini
4G Ghidini 6060 Ball Valve The 6060 type is a 2-way 4G Ghidini ball valve used for flow isolation in industrial piping systems. It belongs to the stainless-steel 2-way ball valve range and is typically applied in food, chemical, pharmaceutical, process water and utility services. Engineering Function The valve is intended for on/off duty, not for...
View
Ball Valve 6062 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 6062 Series | 4G Ghidini

Ball Valve 6062 Series | 4G Ghidini
4G Ghidini
Ghidini 6062 4G Spherical Ball Valve Type 6062 is a two-way MIGNON ball valve for small pipe sizes, manufactured with an AISI 316L / 1.4404 stainless steel body and ISO 228-1 threaded connections. It is used for flow isolation in auxiliary systems, low-flow process lines and compact skid assemblies. Technical Characteristics Nominal sizes: 1/4” to 1/2”...
View
Ball Valve 6162 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 6162 Series | 4G Ghidini

Ball Valve 6162 Series | 4G Ghidini
4G Ghidini
Spherical Ball Valve 4G Ghidini 6162 Two-way MIGNON ball valve with vent connection for small bore lines from 1/4” to 1/2”. The body is AISI 316L / 1.4404 stainless steel, with ISO 228-1 threaded ends and Virgin PTFE seats. Technical Characteristics Pressure class: PN40 Temperature range: -20°C to +160°C Port configuration: full bore or reduced bore,...
View
3 Way (T) Ball Valve - 3001 Series | 4G Ghidini | Philippopoulos s.a.

3 Way (T) Ball Valve - 3001 Series | 4G Ghidini

3 Way (T) Ball Valve - 3001 Series | 4G Ghidini
4G Ghidini
3-Way Ball Valve 4G Ghidini 2830, L-Port, PN250/PN400 The 2830 is a three-way ball valve with L-port configuration, designed for flow diversion between two lines (not for mixing). Full bore design. Body, ball, and stem are manufactured from AISI 316L / 1.4404. Available in sizes 1/4”–1” and pressure classes PN250 or PN400. Supplied with internal threads...
View
Ball Valve 6160 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 6160 Series | 4G Ghidini

Ball Valve 6160 Series | 4G Ghidini
4G Ghidini
Ghidini 6160 4G MIGNON Ball Valve Two-way MIGNON ball valve for small isolation lines, manufactured with AISI 316L / 1.4404 stainless steel body and ISO 228-1 threaded connections. The valve is intended for on/off service in auxiliary circuits, sampling lines and low-flow process services. Technical characteristics Sizes: 1/4” to 1/2” Pressure rating:...
View
3 Way (T) Ball Valve - 3030 Series | 4G Ghidini | Philippopoulos s.a.

3 Way (T) Ball Valve - 3030 Series | 4G Ghidini

3 Way (T) Ball Valve - 3030 Series | 4G Ghidini
4G Ghidini
Ghidini 3030 3-Way Ball Valve 4G, T-Port The 3030 is a stainless steel three-way ball valve with a T-port ball and 4-seat configuration. Designed for distribution, selection, or interconnection of three process lines, depending on the ball’s flow plan. Not intended for proportional flow control applications. Construction Body, ball, and stem: AISI 304L /...
View
3 Way (L) Ball Valve - 4 SEALS STANDARD SEALS 3101 Series | 4G Ghidini | Philippopoulos s.a.

3 Way (L) Ball Valve - 4 SEALS STANDARD SEALS 3101 Series | 4G Ghidini

3 Way (L) Ball Valve - 4 SEALS STANDARD SEALS 3101 Series | 4G Ghidini
4G Ghidini
3-Way Ball Valve 4G Ghidini 3101, L-Port, 4 Seals The 3101 is a stainless steel three-way ball valve with L-port bore and four sealing seats. Designed for flow diversion from a common line to one of two branches, or for feed/return selection in auxiliary process circuits. Standard version includes a manual stainless lever, full bore, and polished external...
View
Wall Penstock Valve - VMCL | Zubi | Philippopoulos s.a.

Wall Penstock Valve - VMCL | Zubi

Wall Penstock Valve - VMCL | Zubi
Zubi Valves
Zubi VMCL Wall Penstock Valve The Zubi VMCL is a wall-mounted penstock valve designed for flow isolation or regulation in open channels, pits, and water or wastewater tanks. The frame/body is fabricated and welded, incorporating internal bronze guides for precise gate movement and alignment. Technical Data Dimensions: 150×150 mm up to 2000×2000 mm...
View
Channel Penstock Valve - VCTL | Zubi | Philippopoulos s.a.

Channel Penstock Valve - VCTL | Zubi

Channel Penstock Valve - VCTL | Zubi
Zubi Valves
Zubi VCTL Channel Penstock Valve The Zubi VCTL is a channel penstock valve with a square or rectangular sliding gate, designed for level control and flow isolation in open channels, pits, and hydraulic structures. It is suitable for embedding in concrete, wall mounting, or installation in existing channels. Technical Specifications Dimensions: 150×150 mm...
View
Buttefly valve - UNIWAT Fig. VF790 | Comeval | Philippopoulos s.a.

Buttefly valve - UNIWAT Fig. VF790 | Comeval

Buttefly valve - UNIWAT Fig. VF790 | Comeval
Comeval
Double Flanged Butterfly Valve Comeval UNIWAT VF790 The UNIWAT VF790 is a concentric double flanged butterfly valve with a soft seat and bidirectional sealing. Primarily used for isolation in water networks, HVAC, process fluids, neutral gases, lubrication, and compressed air. It offers limited throttling capability but should not be selected as a control...
View
Resilient seated gate valves UNIWAT - 504, 505, 507 | Comeval | Philippopoulos s.a.

Resilient seated gate valves UNIWAT - 504, 505, 507 | Comeval

Resilient seated gate valves UNIWAT - 504, 505, 507 | Comeval
Comeval
Gate Valves with Elastic Sealing Comeval UNIWAT 504/505/507 The UNIWAT 504/507 are flanged gate valves designed for flow isolation in water networks, irrigation, and neutral liquids group 2. They are not intended for flow regulation or operation in intermediate positions, as this increases wear on the elastic gate. Technical Specifications Body and...
View
Ball valve 3 way direct mounting UNIFLOW Fig. BV23MD | Comeval | Philippopoulos s.a.

Ball valve 3 way direct mounting UNIFLOW Fig. BV23MD | Comeval

Ball valve 3 way direct mounting UNIFLOW Fig. BV23MD | Comeval
Comeval
Comeval UNIFLOW BV23MD 3-Way Ball Valve The BV23MD is a three-way floating ball valve with threaded ends and direct actuator mounting pad. Designed for rapid 90° flow diversion in liquid or gas networks, it is not intended for throttling or continuous intermediate position operation. Construction and Materials Body, end caps, and ball: stainless steel...
View
Butterfly Valves type CH | Mei | Philippopoulos s.a.

Butterfly Valves type CH | Mei

Butterfly Valves type CH | Mei
Mei Valvole
Butterfly Valve Wafer MEI Series CH The MEI Series CH is a wafer-type butterfly valve made from AISI 316L, designed for installation between flanges in lines requiring stainless steel construction and a clean internal surface. The technical datasheet specifies a typical range of DN100–DN500 and compatibility with UNI PN10 flanges. The product page...
View
Butterfly Valves type VFI | Mei | Philippopoulos s.a.

Butterfly Valves type VFI | Mei

Butterfly Valves type VFI | Mei
Mei Valvole
Wafer Butterfly Valve MEI Series VFI The MEI VFI is a butterfly valve designed for flow isolation in industrial pipelines, available in wafer version with lug option in the manufacturer's series. It is installed as a wafer type between flanges, suitable for sizes DN50–DN300. Construction and Connection Body Materials: Carbon steel or AISI 316L. Special...
View
Butterfly Valves type DV0-2 DV4 | Mei | Philippopoulos s.a.

Butterfly Valves type DV0-2 DV4 | Mei

Butterfly Valves type DV0-2 DV4 | Mei
Mei Valvole
High-Demand Butterfly Valve MEI DV0-2 / DV4 The MEI DV0-2 / DV4 series is a metal-to-metal butterfly valve designed for air, flue gases, and industrial gases with low differential pressure. It is not a soft seated shut-off valve; its sealing is classified as Class III according to ANSI B16.104, making it suitable where controlled leakage is acceptable....
View
Butterfly Valves type BV-BVT | Mei | Philippopoulos s.a.

Butterfly Valves type BV-BVT | Mei

Butterfly Valves type BV-BVT | Mei
Mei Valvole
MEI BV / BVT Food Grade Butterfly Valve The MEI BV/BVT is a sanitary butterfly valve designed for food, beverage, and clean process fluid lines. The series covers DN100–DN400 and is primarily used for on/off isolation or simple throttling at low differential pressure. It should not be considered a precision control valve. Construction and Materials Body...
View
Butterfly Valves type BR-BRT | Mei | Philippopoulos s.a.

Butterfly Valves type BR-BRT | Mei

Butterfly Valves type BR-BRT | Mei
Mei Valvole
MEI BR / BRT Food-Grade Butterfly Valve The MEI BR/BRT is a sanitary butterfly valve designed for food, beverage, and clean process fluid lines, primarily used for on/off isolation and basic throttling. The series covers DN100–DN400 and features a body/disc made of stainless steel SS 316L / EN 1.4404. Construction and Surfaces Top and bottom flange: EN...
View
Butterfly Valves type BVS | Mei | Philippopoulos s.a.

Butterfly Valves type BVS | Mei

Butterfly Valves type BVS | Mei
Mei Valvole
MEI BVS Food Grade Butterfly Valve The MEI BVS is a sanitary butterfly valve designed for small diameter applications, providing flow isolation in clean lines for food, beverages, and auxiliary process fluids. The series covers DN25–DN80 with standard welding ends, while flanged ends or special connections are available upon request. Construction Top...
View
Ball Valves - Trunnion Ball Valve type TV | Mei | Philippopoulos s.a.

Ball Valves - Trunnion Ball Valve type TV | Mei

Ball Valves - Trunnion Ball Valve type TV | Mei
Mei Valvole
MEI Type TV Trunnion Mounted Ball Valve The MEI TV series is a side-entry trunnion mounted ball valve designed for isolation of liquids or gases in industrial pipelines. Available in full bore or reduced bore configurations, with sizes from 1½" to 12"×10" and pressure classes as per ANSI 150, 300, 600, 900, and 1500. End connections are RF or RTJ,...
View
Ball Valves Cryogenic Service | Fluitek | Philippopoulos s.a.

Ball Valves Cryogenic Service | Fluitek

Ball Valves Cryogenic Service | Fluitek
Fluitek Valves
Cryogenic Ball Valves Fluitek Ball valves for cryogenic isolation, available in two- or three-piece construction, cast or forged. The range includes both floating and trunnion-mounted designs, selected based on DN, pressure, differential pressure, and required operating torque. Body and internal components are made from austenitic stainless steels for...
View
Ball Valves Compact Design Double Block and Bleed | Fluitek | Philippopoulos s.a.

Ball Valves Compact Design Double Block and Bleed | Fluitek

Ball Valves Compact Design Double Block and Bleed | Fluitek
Fluitek Valves
Fluitek Compact Double Block & Bleed Ball Valve Two-way compact DBB ball valve for line isolation where two independent sealing barriers and controlled depressurization of the body cavity are required before maintenance, sampling, instrument removal, or downstream work. Design The compact body eliminates conventional valve flanges and reduces...
View
Isolation