Isolation

Ball Valve with heating jacket - FZ4 | ADLER | Philippopoulos s.a.

Ball Valve with heating jacket - FZ4 | ADLER

Ball Valve with heating jacket - FZ4 | ADLER
Adler
Adler FZ4 Three-Way Ball Valve with Heating Jacket The Adler FZ4 is a three-way wafer-type ball valve, full bore, with 90° rotation and integrated heating jacket. It is specified for heated process lines requiring flow diversion or selection without product cooling inside the valve. Construction is referenced as 3-way wafer full bore 90° with heating...
View
Ball Valve with nipples - Type FR2 | ADLER | Philippopoulos s.a.

Ball Valve with nipples - Type FR2 | ADLER

Ball Valve with nipples - Type FR2 | ADLER
Adler
ADLER FR2 Ball Valve with Welded Nipples The ADLER FR2 is a two-piece, full-bore ball valve supplied with 100 mm welded-type nipples for SW/BW plain-end connection. It is manufactured from round steel bar and is used on small-bore, high-pressure process and utility lines where a welded connection is preferred to threaded joints. Technical...
View
Ball Valve with nipples - Type FR3 | ADLER | Philippopoulos s.a.

Ball Valve with nipples - Type FR3 | ADLER

Ball Valve with nipples - Type FR3 | ADLER
Adler
ADLER FR3 Three-Piece Ball Valve with Weld Ends The ADLER FR3 is a full-bore, three-piece ball valve for welded installation in PN40–PN63 process lines. Socket-weld (SW) and butt-weld (BW) ends are used where threaded joints or flanges are not preferred due to leakage risk, vibration, temperature cycling, or plant piping specifications. The three-piece...
View
Ball Valve for cryogenic service Extension 100mm | ADLER | Philippopoulos s.a.

Ball Valve for cryogenic service Extension 100mm | ADLER

Ball Valve for cryogenic service Extension 100mm | ADLER
Adler
Cryogenic Ball Valve Adler with 100 mm Stem Extension The Adler ball valve with 100 mm cryogenic stem extension is designed for low-temperature service down to -80°C. Certified to ISO 28921-1 and ISO 28921-2, this configuration is not intended for applications at -196°C. Do not confuse with variants rated for -196°C. Certified Types FA2: DN15 to DN100,...
View
Ball Valve for cryogenic service Extension 250mm | ADLER | Philippopoulos s.a.

Ball Valve for cryogenic service Extension 250mm | ADLER

Ball Valve for cryogenic service Extension 250mm | ADLER
Adler
Cryogenic Ball Valve Adler with 250 mm Stem Extension The Adler cryogenic ball valve is designed for operation down to -196°C, featuring a 250 mm stem extension. The 250 mm dimension refers to the stem extension length, not the nominal bore. Certified variants are available for DN15 to DN100, depending on series and pressure class. Certified Types FA2:...
View
Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_NKS - 100167 | 4G Ghidini | Philippopoulos s.a.

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_NKS - 100167 | 4G Ghidini

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_NKS - 100167 | 4G Ghidini
4G Ghidini
Aseptic Spherical Ball Valve 4G Ghidini 100167 Two-way ball valve for aseptic process lines, available with DIN 11864-3 connections (Reihe A/B/C), NKS Form A, female type. Constructed from AISI 316L / 1.4404 with polished external finish. Manual stainless steel lever. Full or reduced bore options available. Connection Configuration Reihe A: For DIN...
View
Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS + NKS - 100168 | 4G Ghidini | Philippopoulos s.a.

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS + NKS - 100168 | 4G Ghidini

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS + NKS - 100168 | 4G Ghidini
4G Ghidini
Aseptic Spherical Ball Valve 4G Ghidini 100168 Two-way ball valve for aseptic process lines, equipped with DIN 11864-3 connections (Series A/B/C), BKS + NKS Form A configuration. Model 100168 differs from 100167 by combining male/female aseptic BKS + NKS connections, not only CNKS/NKS. Applied in sections requiring detachable connections with controlled...
View
Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS FORM A MALE - 100169 | 4G Ghidini | Philippopoulos s.a.

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS FORM A MALE - 100169 | 4G Ghidini

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS FORM A MALE - 100169 | 4G Ghidini
4G Ghidini
Aseptic Spherical Ball Valve 4G Ghidini 100169 Two-way ball valve for aseptic process lines, featuring male BKS Form A connection according to DIN 11864-3 Series A/B/C. Model 100169 is specified for lines where the mating connection is NKS/CNKS and a detachable aseptic joint with controlled gasket compression is required. Pipe Series Connections Series...
View
Ball Valve - HEATING JACKET - STANDARD SEALS - MM DIN 11851 - 103027C | 4G Ghidini | Philippopoulos s.a.

Ball Valve - HEATING JACKET - STANDARD SEALS - MM DIN 11851 - 103027C | 4G Ghidini

Ball Valve - HEATING JACKET - STANDARD SEALS - MM DIN 11851 - 103027C | 4G Ghidini
4G Ghidini
Spherical Ball Valve with Heating Jacket 4G Ghidini 103027C Two-way full bore ball valve with integrated heating jacket and DIN 11851 male/male connections. Designed for process lines where product temperature must be maintained within the valve zone to prevent viscosity increase, solidification, or crystallization during flow interruptions. Technical...
View
Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_NKS FORM A FEMALE - 103067 | 4G Ghidini | Philippopoulos s.a.

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_NKS FORM A FEMALE - 103067 | 4G Ghidini

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_NKS FORM A FEMALE - 103067 | 4G Ghidini
4G Ghidini
Aseptic Spherical Ball Valve 4G Ghidini 103067 Two-way ball valve for aseptic process lines according to DIN 11864-3, with female NKS Form A connection. Series 103067 is designed for installations requiring automation capability, as the stem is equipped with an ISO 5211 / DIN 3337 flange for pneumatic or electric actuator mounting. Technical Data Body...
View
Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS + NKS FORM A FEMALE/MALE - 103068 | 4G Ghidini | Philippopoulos s.a.

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS + NKS FORM A FEMALE/MALE - 103068 | 4G Ghidini

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS + NKS FORM A FEMALE/MALE - 103068 | 4G Ghidini
4G Ghidini
Aseptic Spherical Ball Valve 4G Ghidini 103068 Two-way ball valve for aseptic process lines, compliant with DIN 11864-3, featuring BKS + NKS Form A female/male connections. Series 103068 is specified for installations requiring detachable aseptic connections and actuator mounting via ISO 5211 / DIN 3337 interface. Technical Data Type: two-way ball valve...
View
Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS FORM A MALE - 103069 | 4G Ghidini | Philippopoulos s.a.

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS FORM A MALE - 103069 | 4G Ghidini

Ball Valve Aseptic DIN 11864-3 REIHE A/B/C_BKS FORM A MALE - 103069 | 4G Ghidini
4G Ghidini
Aseptic Ball Valve 4G Ghidini 103069 Two-way ball valve for aseptic process lines according to DIN 11864-3, with male connection BKS Form A. Variant 103069 differs from 100169 by providing a shaft for actuator mounting with ISO 5211 / DIN 3337 flange, enabling both manual and automated on/off operation. Technical Data Type: two-way ball valve Flow: full...
View
Ball Valve 1202 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 1202 Series | 4G Ghidini

Ball Valve 1202 Series | 4G Ghidini
4G Ghidini
Ghidini 1202 4G Two-Way Full-Bore Ball Valve Type 1202 is a two-way, full-bore ball valve with a manual stainless steel lever. This version uses clamp ends to DIN 32676, Table 4, Series C, for BS/OD tube according to ASTM A270. Technical Data Valve pattern: 2-way shut-off Port: full bore, for low pressure drop in open position End connection: clamp, DIN...
View
Ball Valve 1230 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 1230 Series | 4G Ghidini

Ball Valve 1230 Series | 4G Ghidini
4G Ghidini
Ghidini 1230 4G Two-Way Full-Bore Ball Valve Type 1230 is a two-way full-bore ball valve with clamp connection to DIN 32676 Reihe C and an ISO 5211 / DIN 3337 top flange for actuator mounting. It is used for automated on/off isolation in stainless-steel process pipework. Technical Characteristics Valve pattern: two-way ball valve Connection: clamp DIN...
View
Ball Valve - HEATING JACKET - 133030C | 4G Ghidini | Philippopoulos s.a.

Ball Valve - HEATING JACKET - 133030C | 4G Ghidini

Ball Valve - HEATING JACKET - 133030C | 4G Ghidini
4G Ghidini
Spherical Ball Valve with Heating Jacket 4G Ghidini 133030C Two-way ball valve with integral seals and heating jacket, designed for process lines where product temperature must be maintained within the valve zone. Connection is clamp DIN 32676. Available in three tubing series: Tab.4 Reihe C for BS/OD ASTM A270, Tab.2 Reihe A for DIN 11850, and Tab.3...
View
Ball Valve STD SEALS - TANK SIDE FLANGE UNI EN1092 & ISO228 FEMALE ON OUTPUT SIDE - 153001 | 4G Ghidini | Philippopoulos s.a.

Ball Valve STD SEALS - TANK SIDE FLANGE UNI EN1092 & ISO228 FEMALE ON OUTPUT SIDE - 153001 | 4G Ghidini

Ball Valve STD SEALS - TANK SIDE FLANGE UNI EN1092 & ISO228 FEMALE ON OUTPUT SIDE - 153001 | 4G Ghidini
4G Ghidini
4G Ghidini 153001 Spherical Bottom Tank Valve Two-way full bore ball valve for bottom tank drainage or isolation. The tank side features a fixed UNI EN 1092 flange; the outlet is ISO 228 female threaded. Constructed from AISI 316L / 1.4404 for use with water, foodstuffs, and chemicals compatible with 316L stainless steel. Designed for processes requiring...
View
Ball Valve STD SEALS TANK SIDE FLANGE UNI EN1092 & DIN11851 FEMALE ON OUTPUT SIDE - 153025 | 4G Ghidini | Philippopoulos s.a.

Ball Valve STD SEALS TANK SIDE FLANGE UNI EN1092 & DIN11851 FEMALE ON OUTPUT SIDE - 153025 | 4G Ghidini

Ball Valve STD SEALS TANK SIDE FLANGE UNI EN1092 & DIN11851 FEMALE ON OUTPUT SIDE - 153025 | 4G Ghidini
4G Ghidini
Spherical Bottom Tank Valve 4G Ghidini 153025 Two-way full bore ball valve designed for installation at the bottom of process tanks. Features a fixed tank flange per UNI EN 1092 and a female outlet connection DIN 11851. Intended for isolation or controlled discharge of product from process vessels, mixers, and production tanks. Key Technical Data Body /...
View
Ball Valve STD SEALS TANK SIDE FLANGE UNI EN1092 & CLAMP DIN32676 TAB.4 REIHE C ON OUTPUT SIDE - 153030 | 4G Ghidini | Philip...

Ball Valve STD SEALS TANK SIDE FLANGE UNI EN1092 & CLAMP DIN32676 TAB.4 REIHE C ON OUTPUT SIDE - 153030 | 4G Ghidini

Ball Valve STD SEALS TANK SIDE FLANGE UNI EN1092 & CLAMP DIN32676 TAB.4 REIHE C ON OUTPUT SIDE - 153030 | 4G Ghidini
4G Ghidini
Bottom Tank Ball Valve 4G Ghidini 153030 Full bore two-way ball valve designed for tank bottom drainage or isolation. The tank side features a fixed flange per UNI EN 1092, while the outlet is a clamp connection per DIN 32676 Tab.4 Reihe C, suitable for process lines requiring frequent disassembly for cleaning, inspection, or batch changeover. Technical...
View
Ball Valve 1530 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 1530 Series | 4G Ghidini

Ball Valve 1530 Series | 4G Ghidini
4G Ghidini
Ghidini 1530 4G Two-Way Ball Valve The type 1530 is a two-way ball valve with DIN flanged ends and an upper mounting flange for actuator installation. It is used for on/off isolation in stainless-steel process pipework, skid systems, and tank connections where flanged removal is required. Technical characteristics Valve pattern: 2-way full shut-off...
View
Ball Valve INTEGRAL SEALS TANK SIDE FLANGE UNI EN1092 & ISO228 FEMALE ON OUTPUT SIDE - 163001 | 4G Ghidini | Philippopoulos s.a.

Ball Valve INTEGRAL SEALS TANK SIDE FLANGE UNI EN1092 & ISO228 FEMALE ON OUTPUT SIDE - 163001 | 4G Ghidini

Ball Valve INTEGRAL SEALS TANK SIDE FLANGE UNI EN1092 & ISO228 FEMALE ON OUTPUT SIDE - 163001 | 4G Ghidini
4G Ghidini
Spherical Bottom Tank Valve 4G Ghidini 163001 Two-way full bore ball valve designed for bottom tank installation. Tank connection is fixed flange per UNI EN 1092; outlet is internal thread ISO 228. Construction material is AISI 316L / 1.4404 with polished external finish. Available in DN40 to DN125 sizes. Technical Specifications Type: Two-way ball...
View
Ball Valve INTEGRAL SEALS TANK SIDE FLANGE FIXED UNI EN 1092 & DIN 11851 FEMALE ON OUTPUT SIDE - 163025 | 4G Ghidini | Philip...

Ball Valve INTEGRAL SEALS TANK SIDE FLANGE FIXED UNI EN 1092 & DIN 11851 FEMALE ON OUTPUT SIDE - 163025 | 4G Ghidini

Ball Valve INTEGRAL SEALS TANK SIDE FLANGE FIXED UNI EN 1092 & DIN 11851 FEMALE ON OUTPUT SIDE - 163025 | 4G Ghidini
4G Ghidini
Spherical Bottom Tank Valve 4G Ghidini 163025 Two-way full bore ball valve designed for installation at tank bottoms. The tank side features a fixed UNI EN 1092 flange, while the outlet is a female DIN 11851 connection, allowing detachable coupling to transfer lines, CIP systems, or flexible production hoses. Technical Data Type: Two-way ball valve, stem...
View
Ball Valve INTEGRAL SEALS TANK SIDE FLANGE UNI EN1092 & CLAMP DIN32676 TAB.4 REIHE C ON OUTPUT SIDE - 163030 | 4G Ghidini | P...

Ball Valve INTEGRAL SEALS TANK SIDE FLANGE UNI EN1092 & CLAMP DIN32676 TAB.4 REIHE C ON OUTPUT SIDE - 163030 | 4G Ghidini

Ball Valve INTEGRAL SEALS TANK SIDE FLANGE UNI EN1092 & CLAMP DIN32676 TAB.4 REIHE C ON OUTPUT SIDE - 163030 | 4G Ghidini
4G Ghidini
Spherical Bottom Tank Valve 4G Ghidini 163030 Two-way full bore ball valve for tank bottom installation, featuring a fixed UNI EN 1092 flange on the vessel side and a clamp outlet per DIN 32676 Tab.4 Reihe C. Model 163030 utilizes integral PTFE seals and is specified for isolation, drainage, or product transfer from process tanks. Technical Data Body,...
View
Ball Valve 1630 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 1630 Series | 4G Ghidini

Ball Valve 1630 Series | 4G Ghidini
4G Ghidini
2-Way Tank Bottom Ball Valve 4G Ghidini 1630 Type 1630 is a tank bottom ball valve, “Integral Seal” design, featuring a bent lower stem and an upper ISO 5211 / DIN 3337 flange for actuator mounting. A version with heating jacket is also available for process temperature control. Technical Specifications Application: tank bottom outlet Flow: full bore...
View
Ball Valve 1901 Series | 4G Ghidini | Philippopoulos s.a.

Ball Valve 1901 Series | 4G Ghidini

Ball Valve 1901 Series | 4G Ghidini
4G Ghidini
2-Way Ball Valve 4G Ghidini 1901 Type 1901 is a manually operated 2-way ball valve for higher pressure service in stainless-steel process piping. It has ISO 228-1 female/female threaded ends, full-bore flow passage and an AISI 316L / 1.4404 body. Technical Characteristics Operation: manual stainless-steel lever Connection: ISO 228-1 female/female...
View
Isolation