Isolation

1
…
16
17
18
…
22

Butterfly valve - TRITIUM | TTV Valves TTV - 1

Butterfly valve - TRITIUM | TTV Valves

Butterfly valve - TRITIUM | TTV Valves

Flanged Butterfly Valve TTV TRITIUM The TTV TRITIUM is a triple offset butterfly valve designed for industrial lines with higher pressure and temperature/chemical requirements than conventional concentric valves with elastomeric liners. The triple offset reduces disc-seat friction during opening/closing and allows for metal or special sealing with lower...

View

Butterfly valve - HYDOR | TTV Valves TTV - 1

Butterfly valve - HYDOR | TTV Valves

Butterfly valve - HYDOR | TTV Valves

Flanged Butterfly Valve TTV HYDOR The TTV HYDOR is a double flanged double eccentric butterfly valve designed for applications requiring flanged connections, increased pressure ratings, and reduced disc-seat friction compared to concentric butterfly valves. The double eccentricity moves the disc away from the seat during opening, minimizing wear on the...

View

Butterfly valve - FLANGED | TTV Valves TTV - 1

Butterfly valve - FLANGED | TTV Valves

Butterfly valve - FLANGED | TTV Valves

Flanged Butterfly Valve TTV The TTV flanged butterfly valve is a concentric valve with an elastomeric liner, designed for flow isolation in water networks, process water, wastewater, HVAC, cooling, fire protection, compressed air, and auxiliary industrial lines. The flanged design is chosen when a full mechanical connection to the piping is required...

View

Buttefly valve - UNIWAT Fig. VF700 | Comeval Comeval - 1

Buttefly valve - UNIWAT Fig. VF700 | Comeval

Buttefly valve - UNIWAT Fig. VF700 | Comeval

Comeval UNIWAT VF700 Wafer Butterfly Valve The Comeval UNIWAT VF700 is a concentric wafer-type butterfly valve with a soft seat, designed for bidirectional flow and primarily used for isolation. It can be used for limited throttling but does not replace a control valve for continuous flow regulation. Suitable for HVAC, water supply, process water, air,...

View

Buttefly valve - UNIWAT Fig. VF701 | Comeval Comeval - 1

Buttefly valve - UNIWAT Fig. VF701 | Comeval

Buttefly valve - UNIWAT Fig. VF701 | Comeval

Butterfly Valve Wafer Comeval UNIWAT VF701 The UNIWAT VF701 is a concentric wafer-type butterfly valve with a soft seat dovetail/edge-boot design, offering bidirectional flow isolation. While limited throttling is possible, continuous regulation requires calculation of Kv, opening angle, and differential pressure. Technical Specifications Design: EN 593,...

View

Globe valve - UNIFLOW 80-89 | Comeval Comeval - 1

Globe valve - UNIFLOW 80-89 | Comeval

Globe valve - UNIFLOW 80-89 | Comeval

Steam Valve Comeval UNIFLOW 80/89 The Comeval UNIFLOW 80/89 is a metal-sealed globe valve designed for unidirectional flow isolation in process, power, HVAC, steam, gas, and industrial liquid applications compatible with construction materials. The globe geometry results in higher pressure drop compared to gate or ball valves but allows faster operation...

View

Buttefly valve - UNIWAT Fig. VF7U0 | Comeval Comeval - 1

Buttefly valve - UNIWAT Fig. VF7U0 | Comeval

Buttefly valve - UNIWAT Fig. VF7U0 | Comeval

Butterfly Valve Comeval UNIWAT VF7U0 The UNIWAT VF7U0 is a concentric butterfly valve of the U / flanged short pattern type, featuring a soft seat and bidirectional sealing. Primarily used for isolation in HVAC systems, water networks, process fluids, compressed air, neutral gases, and auxiliary lubrication circuits. Throttling operation is feasible only...

View

Gate valve - Fig. 90 | Comeval Comeval - 1

Gate valve - Fig. 90 | Comeval

Gate valve - Fig. 90 | Comeval

Comeval Fig. 90 Gate Valve The Comeval Fig. 90 is a metal-seated full bore gate valve designed for flow isolation in process lines, steam, gases, petrochemicals, HTF, compressed air, and industrial water. It is intended for on/off use; throttling is not recommended as intermediate positions increase seat wear, vibration, and leakage risk. Construction and...

View

Gate valve - Fig. 96 | Comeval Comeval - 1

Gate valve - Fig. 96 | Comeval

Gate valve - Fig. 96 | Comeval

Gate Valve Comeval Fig. 96 The Fig. 96 is a forged steel gate valve with metal seats designed for flow isolation in small diameters and high-pressure applications. It functions as an on/off valve and is not suitable for throttling, as intermediate positions increase wear on seats and gate. Key Technical Specifications Design: API 602 Pressure Rating:...

View

Gate valve - Fig. 97 | Comeval Comeval - 1

Gate valve - Fig. 97 | Comeval

Gate valve - Fig. 97 | Comeval

Comeval Gate Valve Fig. 97 The Comeval Fig. 97 is a forged steel gate valve with metal seats designed for flow isolation in small diameters, high pressure, and industrial process networks. It features linear motion, bidirectional flow, OS&Y rising stem, solid wedge, and bolted bonnet. It is intended for on/off service and is not recommended for...

View

Gate valve - Fig. 99 | Comeval Comeval - 1

Gate valve - Fig. 99 | Comeval

Gate valve - Fig. 99 | Comeval

Comeval Gate Valve Fig. 99 The Comeval Fig. 99 is a forged steel gate valve with metal seat designed for flow isolation in small diameters DN10–DN50 / 3/8"–2". It is a linear motion valve, bidirectional, featuring a solid wedge, bolted bonnet, outside screw & yoke, and rising stem. Its operation is on/off; it should not be used for flow regulation....

View

Ball Valve 2 Pieces - UNIFLOW Fig. BV2MD | Comeval Comeval - 1

Ball Valve 2 Pieces - UNIFLOW Fig. BV2MD | Comeval

Ball Valve 2 Pieces - UNIFLOW Fig. BV2MD | Comeval

Comeval UNIFLOW Fig. BV2MD Ball Valve The Comeval UNIFLOW Fig. BV2MD is a 2-piece split-body floating ball valve in ASTM A351 CF8M stainless steel. It is used for on/off isolation in process lines where threaded end connections and compact valve installation are required. Construction and Ratings Body material: ASTM A351 CF8M stainless steel Design:...

View

Ball Valve 2 Pieces - UNIFLOW Fig. BV2 | Comeval Comeval - 1

Ball Valve 2 Pieces - UNIFLOW Fig. BV2 | Comeval

Ball Valve 2 Pieces - UNIFLOW Fig. BV2 | Comeval

Comeval UNIFLOW Fig. BV2 Ball Valve The Comeval UNIFLOW Fig. BV2 is a two-piece, split-body, floating ball valve manufactured in ASTM A351 CF8M stainless steel. It is used for on/off isolation in process lines, utility services and auxiliary industrial networks. The valve is supplied in PN 63 pressure class and is normally operated by a manual lever....

View

Ball Valve 3 Pieces - UNIFLOW Fig. BV3MD | Comeval Comeval - 1

Ball Valve 3 Pieces - UNIFLOW Fig. BV3MD | Comeval

Ball Valve 3 Pieces - UNIFLOW Fig. BV3MD | Comeval

Comeval UNIFLOW Fig. BV3MD Three-Piece Ball Valve The Comeval UNIFLOW Fig. BV3MD is a three-piece, split-body, floating-ball valve manufactured in ASTM A351 CF8M stainless steel. The BV3MD version uses a direct-mounting top arrangement for installation with a manual lever, gearbox, pneumatic actuator, or electric actuator. Construction Body material:...

View

Ball Valve 3 Pieces - UNIFLOW Fig. BV3 | Comeval Comeval - 1

Ball Valve 3 Pieces - UNIFLOW Fig. BV3 | Comeval

Ball Valve 3 Pieces - UNIFLOW Fig. BV3 | Comeval

Comeval UNIFLOW Fig. BV3 Ball Valve Three-piece floating ball valve with split body construction, manufactured in ASTM A351 CF8M stainless steel. The valve is intended for on/off isolation in process lines and auxiliary utility systems. Standard configuration is PN 63, PTFE seated, bidirectional, and manually operated by lever. Construction Body...

View

Ball Valve - UNIFLOW Fig. BF | Comeval Comeval - 1

Ball Valve - UNIFLOW Fig. BF | Comeval

Ball Valve - UNIFLOW Fig. BF | Comeval

Comeval UNIFLOW Fig. BF Floating Ball Valve Floating ball valve with split body construction, bidirectional shut-off and flanged ANSI ends. Used for isolation duties in process piping, industrial utilities and auxiliary plant systems. Available in Class 150, Class 300 and Class 600 versions, subject to size and material configuration. Body and Trim...

View

Ball Valve - UNIFLOW Fig. BV422 | Comeval Comeval - 1

Ball Valve - UNIFLOW Fig. BV422 | Comeval

Ball Valve - UNIFLOW Fig. BV422 | Comeval

Comeval UNIFLOW Fig. BV422 Ball Valve Two-way, two-piece floating ball valve in stainless steel ASTM A351 CF8M, used for on/off isolation in industrial utility and process lines. The BV422 series is supplied with female threaded ends and a full-bore flow path to reduce pressure drop across the valve. Construction Body: ASTM A351 CF8M stainless steel...

View

Globe valve - UNIFLOW Fig. 89 | Comeval Comeval - 1

Globe valve - UNIFLOW Fig. 89 | Comeval

Globe valve - UNIFLOW Fig. 89 | Comeval

Steam Valve Comeval UNIFLOW FIG. 89 The Comeval UNIFLOW FIG. 89 is a forged globe valve designed for unidirectional flow isolation in steam, air, gas, oil, water, and industrial fluid lines compatible with its construction materials. Flow enters below the seat, and installation must follow the arrow on the body. Construction Designed per API 602. Forged...

View

Ball Valve - UNIFLOW Fig. B8 | Comeval Comeval - 1

Ball Valve - UNIFLOW Fig. B8 | Comeval

Ball Valve - UNIFLOW Fig. B8 | Comeval

Comeval UNIFLOW Fig. B8 Floating Ball Valve Two-way floating ball valve, split-body construction, bidirectional service, used for flow isolation in industrial utilities and process piping. The valve is supplied with ANSI flanged ends in pressure classes 150, 300 or 600 lb. Materials and Available Variants Carbon steel: ASTM A105, ASTM A216 WCB Stainless...

View

Globe Valve Bellow Seal - Fig. 84 | Comeval Comeval - 1

Globe Valve Bellow Seal - Fig. 84 | Comeval

Globe Valve Bellow Seal - Fig. 84 | Comeval

Comeval Fig. 84 — ANSI Globe Valve with Bellows The Comeval Fig. 84 / Series UNIFLOW 84 is a cast globe valve designed for unidirectional flow, suitable for isolating lines in steam, gases, HVAC, lubrication, power, chemical, and oil & gas applications. Flow passes beneath the seat; the weir-type body results in higher pressure drop compared to gate...

View

Ball Valve Trunnion Mounted - UNIFLOW Fig. BT | Comeval Comeval - 1

Ball Valve Trunnion Mounted - UNIFLOW Fig. BT | Comeval

Ball Valve Trunnion Mounted - UNIFLOW Fig. BT | Comeval

Comeval UNIFLOW Fig. BT Trunnion Ball Valve The UNIFLOW Fig. BT series is a trunnion-mounted ball valve designed for flow isolation in industrial process systems. Available in sizes DN50–DN900 / 2"–36" and pressure ratings PN16–PN420 / ANSI Class 150–2500, with two- or three-piece body construction and flanged or butt-welded (BW) ends. Technical...

View

Gate valve - Fig. 91 | Comeval Comeval - 1

Gate valve - Fig. 91 | Comeval

Gate valve - Fig. 91 | Comeval

Gate Valve Comeval Fig. 91 The Comeval Fig. 91 is a metal-seated gate valve designed for flow isolation in high-pressure applications, primarily in steam, oil & gas, power, HTF, process fluids, gases, compressed air, and lubrication circuits. It is an on/off valve and should not be used for flow regulation or throttling. Technical Configuration...

View

Butterfly valve - UNIWAT Fig. VF750 | Comeval Comeval - 1

Butterfly valve - UNIWAT Fig. VF750 | Comeval

Butterfly valve - UNIWAT Fig. VF750 | Comeval

Butterfly Valve Lug Comeval UNIWAT VF750 The UNIWAT VF750 is a concentric lug-type butterfly valve with a soft seat and bidirectional sealing. It is primarily intended for flow isolation in HVAC systems, water networks, process lines, compressed air, neutral gases, and lubrication circuits. It offers limited throttling capability but is not designed for...

View

Butterfly valve double offset - UNIWAT Fig. VF791 | Comeval Comeval - 3

Butterfly valve double offset - UNIWAT Fig. VF791 | Comeval

Butterfly valve double offset - UNIWAT Fig. VF791 | Comeval

Double Eccentric Butterfly Valve Comeval UNIWAT VF791 The UNIWAT VF791 is a double eccentric double flanged butterfly valve designed for flow isolation and limited throttling in water and neutral fluid applications. It is unidirectional, requiring flow direction to follow the arrow on the body. The double eccentricity reduces disc-seat friction during...

View

Showing 385-408 of 516 item(s)

1
…
16
17
18
…
22

Related posts

EN 13774 Valves for Gas Distribution Systems up to 16 bar

EN 12569 Industrial Valves Terminology Standard

EN 12516 Industrial Valve Design Strength Standard

EN 10204 – Inspection Documents for Industrial Valves and Process Equipment