List of products by brand B-Safety

B-Safety – Technical profile of an emergency shower and eyewash safety equipment manufacturer

B-Safety is a manufacturer of emergency showers, eyewash stations and safety equipment for industrial, laboratory, chemical, pharmaceutical, food and process environments. Its products are used where personnel may be exposed to hazardous chemicals, corrosive liquids, dust, heat or contamination.

The main product areas include:

  • emergency body showers,
  • eyewash stations,
  • face and eye wash units,
  • combination shower / eyewash units,
  • laboratory safety showers,
  • freeze-protected emergency showers,
  • tank showers,
  • decontamination equipment,
  • safety cabinets and accessories.

Emergency showers must deliver sufficient water flow immediately after activation and remain accessible without obstacles. Eyewash units must provide controlled flow for both eyes without causing mechanical injury. Combination units are used where both full-body exposure and eye exposure are possible.

Selection is not based only on installation location. The engineer must consider the hazardous substance, exposure scenario, ambient temperature, water supply pressure, drainage, freeze protection, corrosion resistance, activation method, visibility and maintenance testing.

For outdoor or low-temperature installations, freeze-protected or heated units may be required. For remote areas, tank showers can provide an independent water supply when a stable water network is not available.

Technical documentation should include:

  • water flow rate,
  • inlet pressure,
  • material of wetted parts,
  • activation method,
  • compliance with applicable emergency shower standards,
  • installation drawing,
  • inspection and test procedure,
  • spare parts and maintenance instructions.

B-Safety products are relevant for EHS managers, plant engineers, laboratory planners, chemical process engineers and maintenance departments responsible for occupational safety infrastructure.

Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety

Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety
B-Safety ClassicLine BR 714 025 – Handheld Eye Wash 45° with Dual Spray Heads The BR 714 025 is a manually operated emergency eye wash unit equipped with two 45° spray heads, designed for wall or bench mounting. The dual-head configuration enables simultaneous irrigation of both eyes, ensuring symmetrical water distribution and precise targeting near...

Eyewash station with mobile stainless steel tank - ClassicLine - BR 960 005 | B-Safety

Eyewash station with mobile stainless steel tank - ClassicLine - BR 960 005 | B-Safety
B-Safety ClassicLine BR 960 005 – Portable Eyewash Station with Stainless Steel Tank The BR 960 005 is a portable eyewash station equipped with a stainless steel tank (16 L gross capacity), mounted on a hand trolley with solid rubber wheels. Designed for deployment in locations lacking permanent water supply or where mobile equipment is required for...

Safety eye shower with bowl - ClassicLine - BR 300 085 | B-Safety

Safety eye shower with bowl - ClassicLine - BR 300 085 | B-Safety
B-Safety ClassicLine BR 300 085 – Eyewash Station with Bowl The BR 300 085 is a fixed, wall-mounted emergency eyewash unit equipped with two spray heads and a green collection/drainage bowl. Designed for direct connection to potable water supply lines, it provides immediate eye irrigation without a manual hand-held nozzle. The unit is intended for...

Safety eye shower with bowl - ClassicLine - BR 305 085 | B-Safety

Safety eye shower with bowl - ClassicLine - BR 305 085 | B-Safety
B-Safety ClassicLine BR 305 085 – Eyewash Station with Bowl and Column The BR 305 085 is a fixed eyewash safety station designed for permanent installation in process environments requiring reliable emergency eye irrigation. The unit features two spray heads, a green plastic bowl, and a vertical 1¼” column. Water supply can be connected from above or...

Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety

Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety
B-Safety ClassicLine BR 200 085 – Dual-Head 45° Eyewash Safety Station The BR 200 085 is a fixed eyewash safety unit designed for installation on laboratory benches or workstations. It features two spray heads set at a 45° angle, enabling simultaneous irrigation of both eyes and peripheral facial areas. The dual-head configuration ensures uniform water...

Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety

Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety
B-Safety ClassicLine BR 210 085 – Wall-Mounted 45° Eyewash Safety Shower The BR 210 085 is a fixed, wall-mounted eyewash safety station equipped with two 45° spray heads. Designed for workstations requiring immediate bilateral eye irrigation with potable water from the main supply, it operates without a flexible hand-held unit. Technical Specifications...

Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety

Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety
B-Safety ClassicLine BR 250 085 – Wall-Mounted Eyewash Station with Exposed Piping The BR 250 085 is a fixed eyewash safety shower designed for permanent installation at locations requiring immediate eye irrigation, such as chemical workbenches, dosing stations, QC laboratories, and areas handling cleaning agents or corrosive solutions. The unit features...

Industrial safety shower, freestanding, with hand-held eye shower & one spray head 45° - ClassicLine - BR 833 085 | B-Safety

Industrial safety shower, freestanding, with hand-held eye shower & one spray head 45° - ClassicLine - BR 833 085 | B-Safety
B-Safety BR 833 085 ClassicLine Floor-mounted emergency safety shower with manual single-head 45° eye/face wash. Designed for locations requiring both full-body decontamination and targeted rinsing of eyes or face, such as near chemical storage, filling stations, laboratory benches, and mixing areas. Requires connection to 1 ¼” female water supply, with...

Industrial safety shower, freestanding, with hand-held eye shower with 2 spray heads 45° - ClassicLine - BR 834 085 | B-Safety

Industrial safety shower, freestanding, with hand-held eye shower with 2 spray heads 45° - ClassicLine - BR 834 085 | B-Safety
B-Safety BR 834 085 ClassicLine Floor-mounted emergency safety shower with manually operated dual-head eye wash (45° orientation). Designed for applications requiring full body decontamination and targeted eye irrigation via a handheld unit, without a fixed eye wash bowl. Requires permanent connection to a 1 ¼” female water supply, with both top and...

Eyewash tank station 60-litre - ClassicLine - BR 952 005 | B-Safety

Eyewash tank station 60-litre - ClassicLine - BR 952 005 | B-Safety
B-Safety ClassicLine BR 952 005 – Eyewash Station with 60 L Tank The BR 952 005 is a self-contained eyewash station equipped with a 60-liter GRP (glass-reinforced plastic) tank. Designed for deployment in locations without permanent water supply or where a portable/temporary eyewash arrangement is required. The unit can be wall- or bench-mounted and...

Eyewash station with stainless steel tank - ClassicLine - BR 958 005 | B-Safety

Eyewash station with stainless steel tank - ClassicLine - BR 958 005 | B-Safety
B-Safety ClassicLine BR 958 005 – Eyewash Station with Stainless Steel Tank The BR 958 005 is a self-contained eyewash station equipped with a stainless steel tank, designed for locations lacking permanent water supply or where a temporary first-flush arrangement is required. Operation is based on a pre-filled tank pressurized via a tyre-type compressed...

Body safety shower wall mounted, exposed pipework - ClassicLine - BR 071 085 | B-Safety

Body safety shower wall mounted, exposed pipework - ClassicLine - BR 071 085 | B-Safety
B-Safety BR 071 085 ClassicLine – Safety Shower Arm for Body Decontamination Wall-mounted safety shower arm with exposed piping, designed for installation in industrial environments where water supply and shower head must remain accessible for visual inspection and periodic testing. The assembly features a ¾" female water connection, 525 mm projection,...

Body safety shower wall mounted, Exposed pipework - ClassicLine - BR 082 085 | B-Safety

Body safety shower wall mounted, Exposed pipework - ClassicLine - BR 082 085 | B-Safety
Body Safety Shower B-Safety BR 082 085 ClassicLine Wall-mounted emergency safety shower with exposed piping, designed for locations requiring immediate personnel decontamination following contact with hazardous chemicals or irritants. The exposed configuration allows for visual inspection, direct access to the valve, and straightforward water connection...

Body safety shower wall mounted, recessed version - ClassicLine - BR 072 085 | B-Safety

Body safety shower wall mounted, recessed version - ClassicLine - BR 072 085 | B-Safety
B-Safety BR 072 085 ClassicLine – Recessed Safety Body Shower Arm Wall-mounted safety shower arm for concealed water supply, featuring a ¾" male water connection. This configuration is specified where pipework must remain within the wall, exposing only the outlet, escutcheon, and shower head. Arm projection is 470 mm; recommended installation height is...

Body safety shower wall mounted, Recessed version - ClassicLine - BR 081 085 | B-Safety

Body safety shower wall mounted, Recessed version - ClassicLine - BR 081 085 | B-Safety
B-Safety BR 081 085 Wall-Mounted Body Safety Shower Wall-recessed emergency body shower for fixed wall installation. Water supply connection ¾" male, with 605 mm projection arm. Standard configuration operates at dynamic water pressure 1.5–3 bar, delivering 50 l/min. Integrated automatic flow regulator maintains consistent spray pattern within specified...

Emergency shower wall mounted, with eye/face wash unit with bowl & lid - ClassicLine - BR 868 085 | B-Safety

Emergency shower wall mounted, with eye/face wash unit with bowl & lid - ClassicLine - BR 868 085 | B-Safety
B-Safety BR 868 085 ClassicLine Wall-mounted emergency safety shower and combined eye/face wash unit with bowl and hinged cover. Designed for installation in laboratories, chemical mixing areas, storage facilities, and container filling stations where both body and eye/face decontamination are required from a single wall-mounted assembly. Technical Data...

Emergency shower wall mounted, with hand-held eye shower - ClassicLine - BR 863 085 | B-Safety

Emergency shower wall mounted, with hand-held eye shower - ClassicLine - BR 863 085 | B-Safety
B-Safety BR 863 085 ClassicLine Wall-mounted emergency safety shower and single-head handheld eye/face wash, 45° spray angle. Designed for laboratories, chemical storage, mixing stations, and container filling areas where both full-body and targeted eye/face decontamination are required via flexible head. Technical Data Type: ClassicLine, wall-mounted,...

Emergency shower wall mounted, with hand-held eye shower - ClassicLine - BR 864 085 | B-Safety

Emergency shower wall mounted, with hand-held eye shower - ClassicLine - BR 864 085 | B-Safety
B-Safety BR 864 085 ClassicLine Wall-mounted emergency safety shower and dual-head hand-held eye wash unit, 45° spray angle. Designed for industrial environments requiring both full-body decontamination and targeted eye irrigation, without a permanent eye wash basin. Wall installation minimizes floor space usage. Water supply connection: ¾” female...

Emergency shower wall mounted, with safety eye shower - ClassicLine - BR 861 085 | B-Safety

Emergency shower wall mounted, with safety eye shower - ClassicLine - BR 861 085 | B-Safety
B-Safety BR 861 085 ClassicLine Wall-mounted emergency safety shower and eye wash combination unit, designed for exposed piping installation. Suitable for laboratories, chemical storage areas, mixing zones, container filling points, and industrial environments requiring a single point for body and eye decontamination. Technical Data Type: ClassicLine,...

Emergency shower wall mounted, with safety eye shower with bowl - ClassicLine - BR 867 085 | B-Safety

Emergency shower wall mounted, with safety eye shower with bowl - ClassicLine - BR 867 085 | B-Safety
B-Safety BR 867 085 ClassicLine Wall-mounted combination safety shower for body and fixed eyewash with bowl. Designed for laboratories, chemical storage areas, mixing zones, and container filling points where simultaneous body and eye decontamination is required from a single wall location. Technical Data Type: ClassicLine, wall-mounted combination unit...

Industrial safety shower, freestanding, draining of the eye shower over the stand pipe - ClassicLine - BR 837 585 | B-Safety

Industrial safety shower, freestanding, draining of the eye shower over the stand pipe - ClassicLine - BR 837 585 | B-Safety
B-Safety BR 837 585 ClassicLine Floor-mounted emergency safety shower with integrated fixed eyewash, basin, and drainage via the support column. Designed for industrial environments requiring a combined body and eye wash station, with concealed drainage (no visible outlet beneath the basin). Technical Data Type: ClassicLine, free-standing, floor-mounted...

Industrial safety shower, freestanding, with eye/face wash unit with bowl & lid - ClassicLine - BR 838 085 | B-Safety

Industrial safety shower, freestanding, with eye/face wash unit with bowl & lid - ClassicLine - BR 838 085 | B-Safety
B-Safety BR 838 085 ClassicLine Floor-mounted emergency safety shower with integrated eye/face wash unit, bowl, and lid. Designed for industrial environments where exposure may affect not only the eyes but also the broader facial area following chemical or corrosive liquid splashes. Technical Data Type: ClassicLine, free-standing Dimensions: 2300 x 355 x...

Variable body safety shower above door installation - ClassicLine - BR 084 185 / V | B-Safety

Variable body safety shower above door installation - ClassicLine - BR 084 185 / V | B-Safety
B-Safety BR 084 185 / V ClassicLine Adjustable emergency body shower for installation above doors, featuring exposed piping and ¾" female water connection. The “V” variant allows for variable installation geometry, with total width adjustable from 285 to 1535 mm and arm projection of 525 mm. Technical Specifications Operating dynamic pressure: 1.5–3 bar...

Variable body safety shower above door installation - ClassicLine - BR 088 085 / V | B-Safety

Variable body safety shower above door installation - ClassicLine - BR 088 085 / V | B-Safety
B-Safety BR 088 085 / V ClassicLine Adjustable emergency body shower for installation above doorways, featuring exposed piping and lateral pull-rod deflection. The “V” variant supports a variable total width of 205–1500 mm, allowing the valve to be positioned either to the right or left of the door, depending on door swing and egress routing...
Showing 25-48 of 128 item(s)