Body safety shower wall mounted, Exposed pipework - ClassicLine - BR 082 085 | B-Safety B-Safety - 1
Body safety shower wall mounted, Exposed pipework - ClassicLine - BR 082 085 | B-Safety B-Safety - 1

Body safety shower wall mounted, Exposed pipework - ClassicLine - BR 082 085 | B-Safety

Body Safety Shower B-Safety BR 082 085 ClassicLine

Wall-mounted emergency safety shower with exposed piping, designed for locations requiring immediate personnel decontamination following contact with hazardous chemicals or irritants. The exposed configuration allows for visual inspection, direct access to the valve, and straightforward water connection assessment.

Technical Specifications

  • Water connection: ¾" female
  • Operating pressure: 1.5–3 bar dynamic
  • Standard flow rate: 50 l/min
  • Arm projection: 630 mm (technical datasheet), 625 mm (product page)
  • Installation height: 2345 mm ±100 mm
  • Activation: pull rod with ring, length 700 mm
  • Shower head: self-draining, POM plastic, chemical-resistant

Construction Materials

Piping and wall flange: AISI 304 stainless steel with green coating. Pull rod: AISI 201. Ball valve ¾": DZR brass CW724R, suitable for dezincification resistance in hydraulic applications.

Standards and Compliance

Complies with EN 15154-1:2006, EN 15154-5:2019, ANSI Z358.1-2014. Additional references: DIN-DVGW, DVGW NW-0416CL0425, DIN 1988, EN 1717. Safety signage per EN ISO 7010 / ASR A1.3, PVC 150 × 150 mm, 15 m recognition distance.

Flow Rate Selection

  • 50 l/min: hazard class I (EN 15154-5:2019)
  • 75 l/min / 20 GPM: hazard class II
  • 110 l/min: hazard class III

Selection based on risk assessment, available hydraulic supply, and chemical hazard type present.

Typical Applications

Chemical laboratories, production facilities, chemical loading areas, water treatment plants, paint shops, CIP zones, and technical areas where in-wall piping is not required.

Accessories

Available: floor-level activation cable for incapacitated personnel, 1150 mm pull rod, ¾" service isolation valve, thermostatic mixing 20–43 °C with 43 °C safety limit, IP65 flow switch, EX zone 1 & 2 switch, 230 V / 50 Hz alarm system.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Projection: 625 mm
  • Installation height: 2345 mm (± 100 mm)
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

The integrated automatic flow regulator ensures a standard-compliant spray pattern regardless of the water pressure on site. With the enclosed safety sign according to EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is marked and visibility is improved. The viewing distance is 15 meters.

DVGW
ISO9001_D_72

Technical Description

  • wall flange with 4 mounting holes of stainless steel, chemical resistant green powder coated including connection piece with integrated automatic flow regulator 50 litres / minute for a standard-compliant spray pattern at a specified working range of 1.5 to 3 bar flow pressure, water connection 3/4“ female
  • quick connect system ¾“ as stainless steel plug nipple, for quick on-site installation and easy alignment of the shower arm
  • ball valve ¾” made of dezincification-resistant brass, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 625 mm
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 2345 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72