Industrial safety shower, freestanding, with hand-held eye shower & one spray head 45° - ClassicLine - BR 833 085 | B-Safety B-S
Industrial safety shower, freestanding, with hand-held eye shower & one spray head 45° - ClassicLine - BR 833 085 | B-Safety B-S

Industrial safety shower, freestanding, with hand-held eye shower & one spray head 45° - ClassicLine - BR 833 085 | B-Safety

B-Safety BR 833 085 ClassicLine

Floor-mounted emergency safety shower with manual single-head 45° eye/face wash. Designed for locations requiring both full-body decontamination and targeted rinsing of eyes or face, such as near chemical storage, filling stations, laboratory benches, and mixing areas. Requires connection to 1 ¼” female water supply, with top and bottom inlets for circulation line integration.

Technical Specifications

  • Height: 2300 mm
  • Arm projection: 630 mm
  • Base: Ø200 mm, 4 anchor holes
  • Body operating pressure: 1.5–3 bar dynamic
  • Body flow rate: 50 l/min
  • Eye wash flow rate: 7 l/min
  • Eye wash operating pressure: 1.5–5 bar
  • Hand shower hose: 1.5 m, ½” female connection
  • Body activation: 700 mm pull rod
  • Eye wash activation: manual lever, non-self-closing valve

Construction Materials

Piping: AISI 304 stainless steel with green chemical-resistant powder coating. Ball valve: DZR brass CW724R. Tees, couplings, plugs: AISI 316. Shower head and flow regulators: POM. Manual eye wash: Luran, wetted parts DZR CW724R, head POM/EPDM.

Standards and Certifications

Complies with EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019, ANSI Z358.1-2014. Also references DIN-DVGW/DVGW, EN 1717, DIN 1988, GOST-R.

Flow Rate Variants

  • BR 833 085: 50 l/min, hazard class I
  • BR 833 085 / 75L: 75 l/min / 20 GPM, hazard class II
  • BR 833 085 / 110L: 110 l/min, hazard class III

FAQ

When is the 45° manual head selected?
Used when targeted rinsing is required, e.g., face, neck, or localized contamination, instead of a fixed eye wash basin.

What is checked during maintenance?
Flow rate, dynamic pressure, valve tightness, hose condition, head cleanliness, dust covers, and unobstructed access to pull rod.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the ClassicLine series are made of high-quality materials and are just as suitable for use in laboratories and research as they are for rough use in industry. B-SAFETY’s green chemical-resistant polyester powder coating has proven itself in many aggressive environments and is resistant to many acids and alkalis.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification-and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, chemical resistant green powder coated, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, chemical resistant green powder coated, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” made of dezincification-resistant brass, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • inclusive ClassicLine hand-held eye shower with one spray head 45°, for mounting on standpipe, position and orientation freely selectable
  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray head for large-scale dispersion of water, 45° angled, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism
  • integrated flow regulation 7 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • sturdy wall bracket with positioning of the shower, including mounting kit for mounting on the standpipe
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72