Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety B-Safety - 1
Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety B-Safety - 2
Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety B-Safety - 3
Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety B-Safety - 1
Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety B-Safety - 2
Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety B-Safety - 3

Safety eye shower with two spray heads 45° - ClassicLine - BR 200 085 | B-Safety

B-Safety ClassicLine BR 200 085 – Dual-Head 45° Eyewash Safety Station

The BR 200 085 is a fixed eyewash safety unit designed for installation on laboratory benches or workstations. It features two spray heads set at a 45° angle, enabling simultaneous irrigation of both eyes and peripheral facial areas. The dual-head configuration ensures uniform water distribution and coverage.

Technical Specifications

  • Flow rate: 14 l/min
  • Operating pressure: 1.5–5 bar
  • Water connection: ½” male
  • Dimensions: 175 × 250 mm
  • Installation height: 825 mm ±200 mm
  • Materials: stainless steel with plastic components
  • Control panel color: green, marked PUSH

Operation and Hydraulic Design

Activation is via a ½” stainless steel ball valve with a PUSH lever. An integrated flow regulator maintains 14 l/min within the specified pressure range, ensuring spray pattern compliance. The 45° spray heads incorporate plastic spray plates, elastomeric protective covers, and dust caps that open automatically under water pressure. Large nozzle orifices minimize stagnant water and reduce scaling risk.

Standards and Compliance

Complies with EN 15154-2:2006 and ANSI Z358.1-2014. Additional references: DIN-DVGW NW-0417CL0263, GOST-R, DIN 1988, EN 1717. Eyewash signage per EN ISO 7010 / ASR A1.3.

Applications

Suitable for potable water networks in chemical laboratories, QC benches, dosing stations, chemical filling areas, paint shops, water treatment facilities, and maintenance zones.

Selection vs. Handheld Eyewash Units

The BR 200 085 is specified where a fixed, immediately accessible eyewash point is required. Handheld units are preferred for targeted rinsing with flexible hoses or in confined spaces.

FAQ

What operating medium is required?
Potable water supply within the specified pressure range.

Does it provide body drench capability?
No. This unit is for eye irrigation only. For full body exposure, a separate safety shower is required.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Colour: green
  • Dimensions (H x W): 175 x 250 mm
  • Operating pressure: 1.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water inlet: ½“ male

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure applied. The rubber sleeves around the shower head protect the person seeking help from impact injuries. Dust covers on the shower head protect against contamination and open automatically when the eye shower is actuated by the water pressure. The large holes in the shower heads prevent standing water and thus calcification.

DVGW
ISO9001_D_72

Technical Description

  • Connection thread 1/2″ male, length 60 mm, incl. fastening-parts kit with nut G1/2″ with 2 screws M5 for difficult to access mounting, with distribution disc, rosette, sealing to table surface with O-Ring
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • Control panel made of steel, chemical resistant green powder coated, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • double nipple ½” of stainless steel
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, low calcification, incl. rubber sleeves and sealed dust caps, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • height 175 mm, total width incl. Lever 250 mm
  • Mounting height 825 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72.png