Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety - B-Safety

Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 025 | B-Safety

B-Safety ClassicLine BR 714 025 – Handheld Eye Wash 45° with Dual Spray Heads

The BR 714 025 is a manually operated emergency eye wash unit equipped with two 45° spray heads, designed for wall or bench mounting. The dual-head configuration enables simultaneous irrigation of both eyes, ensuring symmetrical water distribution and precise targeting near potential hazard points.

Technical Specifications

  • Flow rate: 14 l/min
  • Operating pressure: 2.5–5 bar
  • Minimum flow pressure: 2.5 bar
  • Water connection: ½” female
  • Dimensions: 310 × 145 × 65 mm
  • Flexible hose: 1.5 m
  • Installation height: 700 mm ±200 mm

The handle incorporates a non-self-closing valve and integrated flow regulator to maintain spray pattern within specification across the defined pressure range. A built-in check valve is provided to prevent backflow and protect potable water networks.

Construction Materials

Wet parts are manufactured from DZR brass CW724R. Spray heads and flow regulator are POM. Hose sheathing is stainless steel AISI 304. Fittings are CW617N / CW614N brass.

Standards and Installation

Compliant with EN 15154-2:2006 and ANSI Z358.1-2014. Certified to DIN-DVGW / DVGW NW-0417CL0263. Marking per EN ISO 7010 and ASR A1.3. Mounting via wall/bench bracket, M28×1.5×80 mm fitting, nut, and two M5 screws. O-ring sealing at interface.

Applications

Suitable for chemical laboratories, QC benches, dosing stations, water treatment units, CIP areas, paint shops, and maintenance zones where eye exposure to acids, alkalis, cleaning agents, dust, or particulates is possible.

Maintenance

Periodic activation for at least 5 s is recommended for operational verification. Optional accessories: isolation valve, hose weight, IP65 flow switch, thermostatic mixing 20–43 °C, and alarm 230 V / 50 Hz.

Datasheet and documents

Description

Technical Specifications

  • Material: brass, plastic
  • Color: grey, green
  • Dimensions (H x W): 310 x 145 mm
  • Hose-Length: 1500 mm
  • Operating pressure: 2.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water inlet: ½” female

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The hand-held eye shower is equipped with two B-SAFETY high-performance shower heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

With the enclosed B-SAFETY combination bracket, the hand-held eye shower can be mounted on the wall or also on the table. The robust stainless steel-coated hose in 1.5 meter length ensures good usability of the shower. The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure present. The backflow preventer built into the handle of the shower provides additional protection of the drinking water network.

DVGW
ISO9001_D_72

Technical Description

B-SAFETY ClassicLine hand-held eye shower with two spray heads 45°, wall and table mounted

  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, low calcification, incl. with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • integrated automatic flow regulator 14 litres / minute for a standard-compliant blasting pattern at a specified working range of 2.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • robust table and wall mounting bracket with positioning of the shower, incl. fastening-parts kit with nut M28x1,5mm and 2 screws M5 for mounting difficult to access, sealing to wall/table surface by means of special seal
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • Mounting height 700 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72.png