Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety B-Safety - 1
Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety B-Safety - 2
Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety B-Safety - 3
Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety B-Safety - 1
Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety B-Safety - 2
Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety B-Safety - 3

Safety eye shower with two spray heads 45° - ClassicLine - BR 250 085 | B-Safety

B-Safety ClassicLine BR 250 085 – Wall-Mounted Eyewash Station with Exposed Piping

The BR 250 085 is a fixed eyewash safety shower designed for permanent installation at locations requiring immediate eye irrigation, such as chemical workbenches, dosing stations, QC laboratories, and areas handling cleaning agents or corrosive solutions. The unit features two 45° spray heads on a wall-mount base with visible stainless steel piping for straightforward inspection and maintenance.

Technical Specifications

  • Flow rate: 14 l/min
  • Minimum flow pressure: 1.5 bar
  • Operating pressure: 1.5–5 bar
  • Water connection: ¾” female
  • Dimensions: 200 × 250 mm
  • Wall projection: 310 mm
  • Installation height: 900 mm ±200 mm

Construction and Operation

Activation is via a ½” stainless steel ball valve (AISI 316) with a 130 mm PUSH lever. Integrated flow regulator limits output to 14 l/min to maintain a controlled spray pattern within the specified pressure range. The 45° spray heads are mounted on a U-type distributor, with POM spray plates, EPDM elastomeric guards, and dust covers that open automatically under water pressure.

Materials

  • Spray heads: POM / EPDM
  • Distributor and flow regulator: POM
  • Ball valve: AISI 316
  • Piping, tees, adapter: AISI 304
  • Wall flange: AISI 316
  • Operating plate: steel, green chemical-resistant coating

Standards and Installation

Complies with EN 15154-2:2006, ANSI Z358.1-2014, DIN 1988, EN 1717, and certified under DIN-DVGW NW-0417CL0263. Marking per EN ISO 7010 / ASR A1.3. Rinse water temperature: 15–37 °C (EN), 16–38 °C (ANSI). Minimum rinse duration: 15 min.

FAQ

When is the BR 250 085 selected?
For wall-mounted installations requiring exposed piping and immediate activation without a hand lever.

Does it provide full body coverage?
No. This is an eyewash station; for full body exposure, a separate safety shower is required.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Colour: green
  • Dimensions (H x W): 200 x 250 mm
  • Operating pressure: 1.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure present. The rubber sleeves around the shower head protect the person seeking help from impact injuries. Dust covers on the shower head protect against contamination and open automatically when the eye shower is actuated by the water pressure. The large holes in the shower heads prevent standing water and thus calcification.

DVGW
ISO9001_D_72

Technical Description

  • wall flange with 4 mounting holes made of stainless steel, chemical resistant green powder coated, water inlet ¾” female
  • connection pipe of stainless steel for easy installation and alignment of the shower, chemical resistant green powder coated
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of steel, chemical resistant green powder coated, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, low calcification, incl. rubber sleeves and sealed dust caps, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • height 200 mm, projection 310 mm, total width incl. lever 250 mm
  • mounting height 900 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72.png