Body safety shower wall mounted, Recessed version - ClassicLine - BR 081 085 | B-Safety B-Safety - 1
Body safety shower wall mounted, Recessed version - ClassicLine - BR 081 085 | B-Safety B-Safety - 1

Body safety shower wall mounted, Recessed version - ClassicLine - BR 081 085 | B-Safety

B-Safety BR 081 085 Wall-Mounted Body Safety Shower

Wall-recessed emergency body shower for fixed wall installation. Water supply connection ¾" male, with 605 mm projection arm. Standard configuration operates at dynamic water pressure 1.5–3 bar, delivering 50 l/min. Integrated automatic flow regulator maintains consistent spray pattern within specified pressure range.

Construction and Materials

  • Piping: Stainless steel AISI 304
  • Pull rod with ring: Stainless steel AISI 201
  • ¾" Ball valve: DZR brass CW724R
  • Shower head: POM plastic, self-draining
  • Cover rosette: Polyamide
  • Green chemical-resistant coating on metal components

Operation and Flow Selection

Base model BR 081 085 provides 50 l/min, classified as hazard class I per EN 15154-5:2019. Variants available: 75 l/min / 20 GPM for hazard class II, and 110 l/min for hazard class III, as required by risk assessment for increased decontamination flow.

Standards and Compliance

Complies with EN 15154-1:2006, EN 15154-5:2019, and ANSI Z358.1-2014. Supplied with EN ISO 7010 / ASR A1.3 safety shower signage, PVC sticker 150 × 150 mm, 15 m recognition distance.

Typical Applications

Suitable for chemical plants, industrial laboratories, chemical loading areas, water treatment units, CIP zones, paint shops, battery manufacturing, and locations with risk of personnel exposure to corrosive or irritant liquids.

Additional Equipment

Options: floor-level activation cable for incapacitated personnel, extended pull rod (1150 mm), ¾" service shut-off valve, thermostatic mixing valve 20–43 °C with 43 °C scald protection, IP65 flow switch, EX zone 1 & 2 switch, 230 V / 50 Hz alarm system.

FAQ

Installation height?
2345 mm ±100 mm tolerance.

Pre-selection checks?
Verify available dynamic pressure, required flow per hazard analysis, water temperature, operator access, and need for electrical indication or alarm.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Projection: 605 mm
  • Installation height: 2345 mm (± 100 mm)
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ male

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

The integrated automatic flow regulator ensures a standard-compliant spray pattern regardless of the water pressure on site. With the enclosed safety sign according to EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is marked and visibility is improved. The viewing distance is 15 meters.

DVGW
ISO9001_D_72

Technical Description

  • connection pipe ¾“ of stainless steel, chemical resistant green powder coated, length 75 mm, water inlet ¾” male
  • push-on rosette of polyamide to cover the installation
  • ball valve ¾” made of dezincification-resistant brass, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 605 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 2345 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72