Industrial safety shower, freestanding, with eye/face wash unit with bowl & lid - ClassicLine - BR 838 085 | B-Safety - B-Safety
Industrial safety shower, freestanding, with eye/face wash unit with bowl & lid - ClassicLine - BR 838 085 | B-Safety - B-Safety

Industrial safety shower, freestanding, with eye/face wash unit with bowl & lid - ClassicLine - BR 838 085 | B-Safety

B-Safety BR 838 085 ClassicLine

Floor-mounted emergency safety shower with integrated eye/face wash unit, bowl, and lid. Designed for industrial environments where exposure may affect not only the eyes but also the broader facial area following chemical or corrosive liquid splashes.

Technical Data

  • Type: ClassicLine, free-standing
  • Dimensions: 2300 x 355 x 630 mm
  • Water connection: 1 ¼” female
  • Bowl outlet: 1 ½” male
  • Operating pressure: 1.5–3 bar
  • Body shower flow: 50 l/min
  • Eye/face wash flow: 14 l/min
  • Body shower variants: 50, 75, or 110 l/min for hazard class I, II, or III per EN 15154-5:2019

Construction and Operation

Pipework: Stainless steel AISI 304 with green chemical-resistant powder coating. Base: Ø200 mm, 4 mounting holes. Body valve: ¾” DZR brass CW724R, activated by 700 mm pull rod. Shower head: self-draining, automatic flow regulation at 50 l/min within 1.5–3 bar dynamic pressure.

Eye/Face Wash Unit with Lid

Unit includes ABS body, bowl, and UV/impact-resistant lid. Activation by lowering the lid, which also serves as dust protection. Features 3/8” valve, chrome-plated brass aerators, and 3/8” flow control valve for spray height and flow adjustment.

Standards and Certifications

Complies with EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019, ANSI Z358.1-2014. Also references EN 1717, DIN 1988, DIN-DVGW/DVGW, GOST-R. Markings per EN ISO 7010 and ASR A1.3.

Applications

Chemical plants, laboratories, drum filling stations, acid/alkali storage, and areas requiring protected eye wash bowls due to dust or chemical aerosols.

FAQ

When is the lid version selected?
When the eye/face wash unit must remain protected from contaminants until use.

What is checked during maintenance?
Flow rate, pressure, bowl drainage, aerator cleanliness, valve tightness, and correct activation via lid.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the ClassicLine series are made of high-quality materials and are just as suitable for use in laboratories and research as they are for rough use in industry. B-SAFETY’s green chemical-resistant polyester powder coating has proven itself in many aggressive environments and is resistant to many acids and alkalis.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification-and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, chemical resistant green powder coated, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, chemical resistant green powder coated, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” made of dezincification-resistant brass, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • integrated PremiumLine eye-/face wash unit with bowl and lid for mounting on standpipe, position and orientation freely selectable
  • housing, lid and bowl made of UV and impact resistant ABS plastics, water outlet 1 ½“ male
  • integrated protective cover against dust
  • actuation by pulling down the lid
  • ball valve 3/8“ of brass, with lever actuation by lid, DIN-DVGW tested and certificated
  • aerators made of brass with a very limited spray pattern, chrome-plated
  • with integrated flow regulation valve 3/8” for setting the desired spray height and flow rate, water inlet 3/8” male
  • inclusive sign for eye shower according to EN ISO 7010 und ASR A1.3 on the lid, dimensions 170 x 170 mm, viewing distance 17 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification