Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety B-Safety - 1
Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety B-Safety - 2
Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety B-Safety - 3
Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety B-Safety - 1
Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety B-Safety - 2
Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety B-Safety - 3

Safety eye shower with two spray heads 45° - ClassicLine - BR 210 085 | B-Safety

B-Safety ClassicLine BR 210 085 – Wall-Mounted 45° Eyewash Safety Shower

The BR 210 085 is a fixed, wall-mounted eyewash safety station equipped with two 45° spray heads. Designed for workstations requiring immediate bilateral eye irrigation with potable water from the main supply, it operates without a flexible hand-held unit.

Technical Specifications

  • Flow rate: 14 l/min
  • Minimum flow pressure: 1.5 bar
  • Operating pressure: 1.5–5 bar
  • Water connection: ¾” male
  • Unit dimensions: 180 × 230 mm
  • Wall projection: 300 mm
  • Installation height: 900 mm ±200 mm

Operation

Activation is via PUSH lever and a ½” AISI 316 stainless steel ball valve. Integrated flow regulator maintains 14 l/min across the specified pressure range, ensuring consistent spray pattern and coverage.

The 45° spray heads feature POM spray plates, EPDM elastomeric guards, and dust covers that open automatically under water pressure. Large orifices minimize stagnant water and reduce scale accumulation.

Materials of Construction

  • Spray heads: POM / EPDM
  • U-distributor: POM
  • Ball valve: AISI 316
  • Connection thread/adapter: AISI 304
  • Double nipple: AISI 316
  • Actuation plate: steel with green chemical-resistant coating

Standards & Certifications

Compliant with EN 15154-2:2006, ANSI Z358.1-2014, DIN 1988, EN 1717, and certified under DIN-DVGW NW-0417CL0263. Eyewash signage per EN ISO 7010 / ASR A1.3.

Industrial Applications

Specified for chemical laboratories, QC benches, dosing stations, paint shops, water treatment facilities, and maintenance areas with potential exposure to acids, alkalis, cleaning agents, or particulates.

Options & Accessories

Available with isolation valve ¾”, flow switch IP65, thermostatic mixing 20–43 °C, and alarm system 230 V / 50 Hz.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Colour: green
  • Dimensions (H x W): 180 x 230 mm
  • Operating pressure: 1.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water inlet: ¾“ male

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure applied. The rubber sleeves around the shower head protect the person seeking help from impact injuries. Dust covers on the shower head protect against contamination and open automatically when the eye shower is actuated by the water pressure. The large holes in the shower heads prevent standing water and thus calcification.

DVGW
ISO9001_D_72

Technical Description

  • connection pipe of stainless steel for easy installation and alignment of the shower, chemical resistant green powder coated, water inlet ¾” male
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of steel, chemical resistant green powder coated, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, low calcification, incl. with rubber sleeves and sealed dust caps, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • height 180 mm, projection 300 mm, total width incl. lever 230 mm
  • mounting height 900 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72.png