Ball Valves

Ball Valve 5430 Series | 4G Ghidini - 4G Ghidini

Ball Valve 5430 Series | 4G Ghidini

Ball Valve 5430 Series | 4G Ghidini
4G Ghidini
Ghidini 5430 4G Two-Way Ball Valve The Ghidini 5430 is a three-piece “Integral Seal” two-way ball valve with DIN 32676 Reihe C clamp ends and an ISO 5211 / DIN 3337 actuator mounting interface. It is intended for automated on/off isolation in clean stainless-steel process lines. Technical characteristics End connection: clamp to DIN 32676 Tab. 4 Reihe...
View
Ball Valve 5501 Series | 4G Ghidini - 4G Ghidini

Ball Valve 5501 Series | 4G Ghidini

Ball Valve 5501 Series | 4G Ghidini
4G Ghidini
4G Ghidini 5501 Ball Valve Two-way, three-piece, full-bore ball valve for line isolation in industrial and hygienic pipework. The body is AISI 316L / 1.4404 stainless steel with butt-weld ends to BS-OD / ASTM A270, DIN 11850 or ISO 1127 pipe standards. Operating Data Nominal sizes: DN10–DN100 or DN15–DN100, depending on version Pressure classes:...
View
Ball Valve 5530 Series | 4G Ghidini - 4G Ghidini

Ball Valve 5530 Series | 4G Ghidini

Ball Valve 5530 Series | 4G Ghidini
4G Ghidini
Ghidini 5530 4G Ball Valve Two-way, three-piece, full-bore ball valve with Integral Seal design and rotating round butt-weld ends. The body is AISI 316L / 1.4404, intended for industrial pipework where welded installation is required and external leakage points must be reduced. Technical data Connections: butt-weld BS-OD / ASTM A270, DIN 11850, ISO 1127...
View
3 Way (L) Ball Valve - HIGH PRESSURE PN250/PN400 - 2830 | 4G Ghidini - 4G Ghidini

3 Way (L) Ball Valve - HIGH PRESSURE PN250/PN400 - 2830 | 4G Ghidini

3 Way (L) Ball Valve - HIGH PRESSURE PN250/PN400 - 2830 | 4G Ghidini
4G Ghidini
3-Way Ball Valve 4G Ghidini 2830, L-Port, PN250/PN400 The 2830 series is a three-way ball valve with L-port configuration, designed for flow diversion between two lines (not for mixing). Full bore design. Body, ball, and stem are manufactured from AISI 316L / 1.4404. Available in sizes 1/4”–1” and pressure classes PN250 or PN400. Supplied with internal...
View
3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - ISO 228 F - HEATING JACKET - 300101C | 4G Ghidini - 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - ISO 228 F - HEATING JACKET - 300101C | 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - ISO 228 F - HEATING JACKET - 300101C | 4G Ghidini
4G Ghidini
3-Way Ball Valve with Heating Jacket 4G Ghidini 300101C Three-way ball valve with T-port configuration, four seats, and integrated heating jacket. Designed for mixing or diverting flow in heated process lines. All three ports feature internal threads ISO 228 F/F/F. Manual operation via stainless steel lever. Technical Data Body materials: AISI 304L /...
View
3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - F DIN 11851 - HEATING JACKET - 300125C | 4G Ghidini - 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - F DIN 11851 - HEATING JACKET - 300125C | 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - F DIN 11851 - HEATING JACKET - 300125C | 4G Ghidini
4G Ghidini
3-Way Ball Valve with Heating Jacket 4G Ghidini 300125C Three-way T-port ball valve with four seats and integrated heating jacket, designed for diverting, bypassing, or mixing flow in heated process lines. All three ports feature DIN 11851 female/female/female connections. Manual operation via stainless steel lever. Full bore design for minimal pressure...
View
3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - M DIN 11851 - HEATING JACKET - 300127C | 4G Ghidini - 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - M DIN 11851 - HEATING JACKET - 300127C | 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - M DIN 11851 - HEATING JACKET - 300127C | 4G Ghidini
4G Ghidini
3-Way Ball Valve with Heating Jacket 4G Ghidini 300127C Three-way T-port ball valve with 4 seats, integrated heating jacket, and DIN 11851 male/male/male connections. Designed for flow diversion, mixing, or bypass in process lines where thermal maintenance of the medium inside the valve body is required. Technical Data Body materials: AISI 304L / 1.4307...
View
3 Way (T) Ball Valve - HEATING JACKET - 300130C | 4G Ghidini - 4G Ghidini

3 Way (T) Ball Valve - HEATING JACKET - 300130C | 4G Ghidini

3 Way (T) Ball Valve - HEATING JACKET - 300130C | 4G Ghidini
4G Ghidini
3-Way Ball Valve with Heating Jacket 4G Ghidini 300130C The 300130C is a manually operated 3-way T-port ball valve with 4 seats, heating jacket, and DIN 32676 clamp connections. Designed for flow diversion, mixing, or bypass in process lines where product temperature must be maintained within the valve body. Technical datasheets reference code 300130C,...
View
3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - ISO228F - HEATING JACKET - 303001C | 4G Ghidini - 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - ISO228F - HEATING JACKET - 303001C | 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - ISO228F - HEATING JACKET - 303001C | 4G Ghidini
4G Ghidini
3-Way Ball Valve with Heating Jacket 4G Ghidini 303001C Three-way T-port ball valve with T-port configuration, 4 seats, heating jacket, and threaded ISO 228 female/female/female connections. The 303001C variant differs from 300101C by providing an upper mounting flange ISO 5211 / DIN 3337 for actuator installation, instead of manual operation only....
View
3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - M DIN 11851 - HEATING JACKET - 303027C | 4G Ghidini - 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - M DIN 11851 - HEATING JACKET - 303027C | 4G Ghidini

3 Way (T) Ball Valve - 4 SEALS STANDARD SEALS - M DIN 11851 - HEATING JACKET - 303027C | 4G Ghidini
4G Ghidini
3-Way Ball Valve with Heating Jacket 4G Ghidini 303027C Three-way T-port ball valve with heating jacket, 4-seal configuration, and DIN 11851 male/male/male connections. Model 303027C features an upper flange ISO 5211 / DIN 3337 for pneumatic or electric actuator mounting, in contrast to the manually operated 300xxx series. Technical Data Body materials:...
View
3 Way (T) Ball Valve - HEATING JACKET - 303030C | 4G Ghidini - 4G Ghidini

3 Way (T) Ball Valve - HEATING JACKET - 303030C | 4G Ghidini

3 Way (T) Ball Valve - HEATING JACKET - 303030C | 4G Ghidini
4G Ghidini
4G Ghidini 303030C Three-Way Ball Valve with Heating Jacket The 303030C is a three-way T-port ball valve with 4 seats, integrated heating jacket, and clamp DIN 32676 connections. The top flange is ISO 5211 / DIN 3337 for pneumatic or electric actuator mounting, supporting automated flow diversion, mixing, or bypass operations. Technical Data Connections:...
View
3 Way (L) Ball Valve - REDUCED STANDARD SEALS - ISO 228 F - 310101 | 4G Ghidini - 4G Ghidini

3 Way (L) Ball Valve - REDUCED STANDARD SEALS - ISO 228 F - 310101 | 4G Ghidini

3 Way (L) Ball Valve - REDUCED STANDARD SEALS - ISO 228 F - 310101 | 4G Ghidini
4G Ghidini
3-Way Ball Valve 4G Ghidini 310101, L-Port, Reduced Bore Type 310101 is a three-way ball valve with L-port configuration, reduced bore, and internal threads per ISO 228 F/F/F. Designed for flow path selection between two branches, not for mixing. The four-seat design provides sealing at all three body connections. Construction Body / ball / ends / stem:...
View
3 Way (L) Ball Valve - 310130 | 4G Ghidini - 4G Ghidini

3 Way (L) Ball Valve - 310130 | 4G Ghidini

3 Way (L) Ball Valve - 310130 | 4G Ghidini
4G Ghidini
3-Way Ball Valve 4G Ghidini 310130, L-Port Clamp The 310130 is a stainless steel three-way ball valve with an L-port bore and 4 seals construction. Designed for flow diversion from a common line to one of two branches; not intended for mixing or proportional flow control. Features a manual stainless steel lever and clamp-type connections. Connections and...
View
3 Way (L) Ball Valve - HEATING JACKET - 310130C | 4G Ghidini - 4G Ghidini

3 Way (L) Ball Valve - HEATING JACKET - 310130C | 4G Ghidini

3 Way (L) Ball Valve - HEATING JACKET - 310130C | 4G Ghidini
4G Ghidini
Ghidini 310130C 4G Three-Way Ball Valve with Heating Jacket The 310130C is a manually operated three-way ball valve, L-port configuration, with 4 seats, integrated heating jacket, and DIN 32676 clamp connections. Designed for flow selection between two branches; not suitable for simultaneous communication of all three ports as in T-port arrangements....
View
3 Way (L) Ball Valve - VERTICAL DIVERTING STANDARD SEALS - ISO 228 F - 340101 | 4G Ghidini - 4G Ghidini

3 Way (L) Ball Valve - VERTICAL DIVERTING STANDARD SEALS - ISO 228 F - 340101 | 4G Ghidini

3 Way (L) Ball Valve - VERTICAL DIVERTING STANDARD SEALS - ISO 228 F - 340101 | 4G Ghidini
4G Ghidini
3-Way Ball Valve 4G Ghidini 340101, L-Port Vertical Diverting The 340101 is a stainless steel three-way ball valve with an L-port and vertical diverting configuration. The third port is oriented perpendicular to the main flow, enabling selection between the main line and a vertical branch. This valve is not intended for mixing or proportional flow...
View
3 Way (L) Ball Valve - VERTICAL DIVERTING STANDARD SEALS - ISO 228 F - 343001 | 4G Ghidini - 4G Ghidini

3 Way (L) Ball Valve - VERTICAL DIVERTING STANDARD SEALS - ISO 228 F - 343001 | 4G Ghidini

3 Way (L) Ball Valve - VERTICAL DIVERTING STANDARD SEALS - ISO 228 F - 343001 | 4G Ghidini
4G Ghidini
3-Way Ball Valve 4G Ghidini 343001, L-Port Vertical Diverting The 343001 is a three-way ball valve, vertical diverting type, with an L-port bore and ISO 228 F/F/F threaded connections. This configuration is intended for flow selection between a main line and a vertical branch, not for mixing or proportional flow control. Available in 1/4”–2” sizes, full...
View
3 Way (L) Ball Valve - DIVERTING STANDARD SEALS - ISO 228 F - 350101 | 4G Ghidini - 4G Ghidini

3 Way (L) Ball Valve - DIVERTING STANDARD SEALS - ISO 228 F - 350101 | 4G Ghidini

3 Way (L) Ball Valve - DIVERTING STANDARD SEALS - ISO 228 F - 350101 | 4G Ghidini
4G Ghidini
3-Way Ball Valve 4G Ghidini 350101, L-Port Diverting The 350101 is a stainless steel 3-way ball valve with L-port configuration, designed for flow diversion between two paths. Not intended for mixing or proportional control. The valve is full bore, features internal threads ISO 228 F/F/F, manual stainless steel lever, and body in AISI 316L / 1.4404....
View
3 Way (L) Ball Valve - DIVERTING STANDARD SEALS - ISO 228 F - 353001 | 4G Ghidini - 4G Ghidini

3 Way (L) Ball Valve - DIVERTING STANDARD SEALS - ISO 228 F - 353001 | 4G Ghidini

3 Way (L) Ball Valve - DIVERTING STANDARD SEALS - ISO 228 F - 353001 | 4G Ghidini
4G Ghidini
Ghidini 353001 3-Way Ball Valve 4G, L-Port Diverting, Stainless Steel The 353001 is a stainless steel three-way ball valve, diverting type, with L-port bore and ISO 228 F/F/F threaded connections. It is designed for flow selection—one flow path open at a time, typically diverting from a common line to one of two branches. Not intended for mixing or...
View
Ball Valve - Type 19000 | Ibor Valves - Ibor Valves

Ball Valve - Type 19000 | Ibor Valves

Ball Valve - Type 19000 | Ibor Valves
Ibor Valves
Ibor Type 19000 Ball Valve The Ibor 19000 is a 2-way ball valve used for on/off isolation in industrial piping systems handling liquids, gases, steam auxiliaries and process utility services. Selection is normally based on pressure class, temperature, fluid compatibility, leakage requirements and cavity isolation philosophy. Technical Configuration DIB...
View
Ball Valve - Type 19001 | Ibor Valves - Ibor Valves

Ball Valve - Type 19001 | Ibor Valves

Ball Valve - Type 19001 | Ibor Valves
Ibor Valves
Ibor Type 19001 Ball Valve The Ibor 19001 is a 2-way ball valve used for on/off isolation in industrial liquid and gas lines. The valve can be configured with DIB I or DIB II seat arrangements, depending on the required cavity sealing philosophy, pressure direction, and maintenance isolation requirements. Seat and Stem Configuration DIB I: double...
View
Ball Valve - Type 37000 | Ibor Valves - Ibor Valves

Ball Valve - Type 37000 | Ibor Valves

Ball Valve - Type 37000 | Ibor Valves
Ibor Valves
Ibor Type 37000 Ball Valve The Ibor 37000 is a two-way ball valve for isolation service in industrial liquid and gas piping. The DIB seat arrangement is used where controlled sealing of the ball cavity and defined upstream/downstream seat behaviour are required. Seat design and DIB variants DIB I: double piston effect on both upstream and downstream...
View
Ball Valve - Type 37001 | Ibor Valves - Ibor Valves

Ball Valve - Type 37001 | Ibor Valves

Ball Valve - Type 37001 | Ibor Valves
Ibor Valves
Spherical Ball Valve Ibor Type 37001 The Ibor 37001 is a 2-way industrial ball valve used for on/off isolation in process piping. The design is applicable where tight shut-off, cavity pressure management and seat sealing philosophy must be defined during valve selection. The valve can be specified with DIB seat arrangements and a secondary soft seat to...
View
Ball Valve - Type 32000 | Ibor Valves - Ibor Valves

Ball Valve - Type 32000 | Ibor Valves

Ball Valve - Type 32000 | Ibor Valves
Ibor Valves
Ibor Type 32000 Ball Valve The Ibor 32000 is a 2-way ball valve used for on/off isolation in industrial liquid and gas pipelines. The design includes a self-relieving seat arrangement to vent excess pressure from the ball cavity when trapped fluid expands thermally. Technical Characteristics Self-relieving seat for cavity pressure relief Stem extension...
View
Ball Valve - Type 32001 | Ibor Valves - Ibor Valves

Ball Valve - Type 32001 | Ibor Valves

Ball Valve - Type 32001 | Ibor Valves
Ibor Valves
Ibor Type 32001 Ball Valve The Ibor 32001 is a 2-way ball valve used for flow isolation in industrial liquid and gas services. It is specified where tight shut-off, cavity pressure relief, and defined end-connection standards are required in process or utility pipework. Sealing and Operating Features Self-relieving seat for cavity pressure relief caused...
View
Showing 97-120 of 313 item(s)
Related posts
ISO 5752 Face-to-Face and Center-to-Face Dimensions for Industrial Valves
ISO 5752 Face-to-Face and Center-to-Face Dimensions for Industrial Valves
Posted in: Technical Standards Library, ISO Standards
06/29/2026
ISO 5752 is the international standard that specifies face-to-face (F2F) and center-to-face (C2F) dimensions for...
Read more
ISO 15848 Fugitive Emissions Standard for Industrial Valves
ISO 15848 Fugitive Emissions Standard for Industrial Valves
Posted in: Technical Standards Library, ISO Standards
06/29/2026
ISO 15848 is the international standard used to evaluate and classify fugitive emissions from industrial valves. The...
Read more
EN 13774 Valves for Gas Distribution Systems up to 16 bar
EN 13774 Valves for Gas Distribution Systems up to 16 bar
Posted in: Technical Standards Library, European EN Standards
06/19/2026
EN 13774 is the European standard specifying performance requirements for metallic isolating valves used in gas...
Read more
EN 1983 Steel Ball Valves Standard
EN 1983 Steel Ball Valves Standard
Posted in: Technical Standards Library, European EN Standards
06/19/2026
EN 1983 is the European standard that specifies the design, manufacturing, inspection, testing and performance...
Read more
EN 12516 Industrial Valve Design Strength Standard
EN 12516 Industrial Valve Design Strength Standard
Posted in: Technical Standards Library, European EN Standards
06/19/2026
EN 12516 is the primary European standard governing the strength design of industrial valves. It defines...
Read more
ISO 5211 Valve and Actuator Mounting Interface Standard
ISO 5211 Valve and Actuator Mounting Interface Standard
Posted in: Technical Standards Library, ISO Standards
06/14/2026
ISO 5211 is the international standard defining mounting interfaces between quarter-turn industrial valves and...
Read more
ISO 5208 Industrial Valve Pressure Testing and Leakage Rate Classification
ISO 5208 Industrial Valve Pressure Testing and Leakage Rate Classification
Posted in: Technical Standards Library, ISO Standards
06/14/2026
ISO 5208 is the international standard defining pressure testing procedures, leakage rate classifications and...
Read more
EN 12266 Pressure and Tightness Testing of Industrial Valves
EN 12266 Pressure and Tightness Testing of Industrial Valves
Posted in: Technical Standards Library, European EN Standards
06/13/2026
EN 12266 is the primary European standard defining pressure testing, tightness testing and acceptance criteria for...
Read more
EN 1092-1 – PN Flanges for Industrial Valves and Piping
EN 1092-1 – PN Flanges for Industrial Valves and Piping
Posted in: Technical Standards Library, European EN Standards
06/13/2026
EN 1092-1 is a European standard for circular steel flanges used with pipes, valves, fittings and accessories in...
Read more
EN 558 – Face-to-Face and Centre-to-Face Dimensions of Industrial Valves
EN 558 – Face-to-Face and Centre-to-Face Dimensions of Industrial Valves
Posted in: Technical Standards Library, European EN Standards
06/13/2026
EN 558 specifies the face-to-face and centre-to-face dimensions of metallic industrial valves installed in flanged...
Read more
Ball Valves