Ball Valves

Ball Valve 1130 Series | 4G Ghidini

Ghidini 1130 4G Two-Way Ball Valve The Ghidini type 1130 is a full-bore, two-way ball valve for industrial shut-off duty in 5” process lines. The valve body is prepared with an ISO 5211 / DIN 3337 mounting flange for direct actuator installation. Technical Data Nominal size: 5” Flow configuration: full bore Body materials: AISI 304L or AISI 316L...

View

Ball Valve 1301 Series | 4G Ghidini

4G Ghidini

Ghidini 1301 4G 2-Way Ball Valve Type 1301 is a 2-way full-bore “Integral Seal” ball valve with a manual stainless-steel lever. It is used for flow isolation in industrial piping systems where low pressure drop, clean internal geometry and AISI 316L / 1.4404 stainless-steel construction are required. Technical Data Valve configuration: 2-way shut-off...

View

Ball Valve 1330 Series | 4G Ghidini

4G Ghidini

Ghidini 1330 4G 2-Way Ball Valve The Ghidini type 1330 is a 2-way, full-bore “Integral Seal” ball valve with an ISO 5211 / DIN 3337 top flange for direct mounting of pneumatic or electric actuators. It is used for automated on/off isolation in stainless steel process piping where remote operation, interlocking, or PLC/SCADA integration is required....

View

Ball Valve 5301 Series | 4G Ghidini

4G Ghidini

Ghidini 5301 4G Two-Way Ball Valve Type 5301 is a manually operated, three-piece, full-bore ball valve with “Integral Seal” construction for on/off isolation in stainless steel industrial piping. The body is manufactured from AISI 316L / 1.4404 and is fitted with Virgin PTFE seats. Technical characteristics Construction: three-piece body, Integral Seal...

View

Ball Valve 5330 Series | 4G Ghidini

4G Ghidini

Ghidini 5330 4G 2-Way Ball Valve The Ghidini 5330 is a three-piece “Integral Seal” ball valve in stainless steel, configured for automated on/off isolation in process piping. It includes an ISO 5211 / DIN 3337 actuator mounting interface for direct installation of pneumatic or electric actuators. Technical Characteristics Valve type: 2-way full-port...

View

Ball Valves 5030 Series | 4G Ghidini

4G Ghidini

Ghidini 5030 4G 2-way ball valve The Ghidini 5030 is a three-piece, full-bore, 2-way ball valve with an ISO 5211 / DIN 3337 actuator mounting flange. It is used for automated on/off isolation in stainless-steel process piping where the valve is operated by a pneumatic or electric actuator. Technical characteristics Body construction: three-piece design...

View

Ball Valve 5001 Series | 4G Ghidini

4G Ghidini

Ghidini 5001 4G Two-Way Ball Valve Type 5001 is a three-piece, full-bore, two-way ball valve with a manual stainless steel lever. The body is manufactured from AISI 316L / 1.4404 and is used for on/off isolation in stainless steel industrial pipework. Technical characteristics Body construction: three-piece Flow passage: full bore Material: AISI 316L /...

View

Ball Valve 2730 Series | 4G Ghidini

4G Ghidini

Ghidini 2730 4G 2-Way Ball Valve Type 2730 is a full-bore, high-pressure 2-way ball valve with an ISO 5211 / DIN 3337 mounting flange for pneumatic or electric actuation. It is used for automated on/off isolation in process lines up to PN 400. Technical Data Body material: AISI 316L / 1.4404 stainless steel Sizes: 1/4” to 1” Connections: ISO 228-1 or...

View

3 Way (L) Ball Valve - 3 SEALS STANDARD SEALS - 3730 Series | 4G Ghidini

4G Ghidini

Ghidini 3730 3-Way Ball Valve 4G, L-Port, 3 Seats The 3730 is a stainless steel three-way ball valve with an L-port bore, 3-seat configuration, and an upper mounting flange ISO 5211 / DIN 3337 for actuator installation. Designed for flow diversion between two lines; not intended for mixing or proportional flow control. Construction Materials: AISI 304L /...

View

3 Way (L) Ball Valve - 4 SEALS STANDARD SEALS 3101 Series | 4G Ghidini

4G Ghidini

3-Way Ball Valve 4G Ghidini 3101, L-Port, 4 Seals The 3101 is a stainless steel three-way ball valve with L-port bore and four sealing seats. Designed for flow diversion from a common line to one of two branches, or for feed/return selection in auxiliary process circuits. Standard version includes a manual stainless lever, full bore, and polished external...

View

3 Way (L) Ball Valve - STANDARD SEALS - 3101 Series | 4G Ghidini

4G Ghidini

Ghidini 3101 3-Way Ball Valve, 4G, L-Port The 3101 is a stainless steel three-way ball valve with L-port configuration, designed for flow diversion from a common line to one of two branches. Construction features a 4-seal design, manual stainless steel lever, and full bore for welded and Class flange versions. Materials and Sealing Body / ball / stem:...

View

3 Way (L) Ball Valve - 3 SEALS STANDARD SEALS - 3701 Series | 4G Ghidini

4G Ghidini

3-Way Ball Valve 4G Ghidini 3701, L-Port, 3 Seals The 3701 is a stainless steel three-way ball valve with L-port bore and 3-seat configuration, designed for flow diversion between two lines. Intended for route selection, not for mixing or proportional flow control. This series is primarily used for larger sizes, from 2 1/2” to 4” or DN65–DN100, depending...

View

3 Way (L) Ball Valve - 3130 Series | 4G Ghidini

4G Ghidini

Ghidini 3130 3-Way Ball Valve 4G, L-Port Type 3130 is a stainless steel three-way ball valve with L-port configuration and 4 seals construction. Designed for automated flow diversion from a common line to one of two branches; not intended for mixing or proportional flow control. The series features an ISO 5211 / DIN 3337 top flange for actuator mounting....

View

3 Way (T) Ball Valve - 3630 Series | 4G Ghidini

4G Ghidini

3-Way Ball Valve 4G Ghidini 3630, T-Port, 3 Seats The 3630 is a stainless steel 3-way ball valve with a T-port ball, 3-seat configuration, and ISO 5211 / DIN 3337 top flange for actuator mounting. Designed for flow selection or distribution between three lines, depending on ball position. Not intended for continuous proportional flow control....

View

3 Way (T) Ball Valve - 3601 Series | 4G Ghidini

4G Ghidini

3-Way Ball Valve 4G Ghidini 3601, T-Port, 3 Seats The 3601 is a stainless steel three-way ball valve with a T-port ball and 3-seat configuration. Designed for distribution, selection, or interconnection of three process lines, depending on ball position. Not intended for throttling or continuous operation in intermediate positions. Construction Handle:...

View

Ball Valve 2530 Series | 4G Ghidini

4G Ghidini

Ghidini 2530 4G 2-Way Ball Valve Type 2530 is a 2-way, full-bore ball valve in AISI 316L / 1.4404 stainless steel. It has female/female ISO 228-1 threaded connections with rotating threaded flanges and an ISO 5211 / DIN 3337 top flange for actuator mounting. The standard version uses “Standard Seals” and is intended for automated on/off isolation in...

View

Ball Valve 4001 Series | 4G Ghidini

4G Ghidini

Ghidini 4001 4G 2-Way Jacketed Ball Valve The Ghidini 4001 is a 2-way, full-bore, wafer-pattern ball valve with a heating jacket. It is used on process lines where the fluid must be kept within a controlled temperature range to prevent solidification, excessive viscosity increase, or product hold-up around the valve body. Technical Characteristics...

View

Ball Valve 4030 Series | 4G Ghidini

4G Ghidini

Ghidini 4030 4G Two-Way Ball Valve The Ghidini 4030 is a full-bore wafer-pattern ball valve with an ISO 5211 top flange for actuator mounting. It is used where automated on/off isolation is required in process lines. The body is available as a flat-body version machined from bar stock or with a heating jacket for media that must be kept above a minimum...

View

Ball Valve 6060 Series | 4G Ghidini

4G Ghidini

4G Ghidini 6060 Ball Valve The 6060 type is a 2-way 4G Ghidini ball valve used for flow isolation in industrial piping systems. It belongs to the stainless-steel 2-way ball valve range and is typically applied in food, chemical, pharmaceutical, process water and utility services. Engineering Function The valve is intended for on/off duty, not for...

View

Ball Valve 6062 Series | 4G Ghidini

4G Ghidini

Ghidini 6062 4G Spherical Ball Valve Type 6062 is a two-way MIGNON ball valve for small pipe sizes, manufactured with an AISI 316L / 1.4404 stainless steel body and ISO 228-1 threaded connections. It is used for flow isolation in auxiliary systems, low-flow process lines and compact skid assemblies. Technical Characteristics Nominal sizes: 1/4” to 1/2”...

View

Ball Valve 6162 Series | 4G Ghidini

4G Ghidini

Spherical Ball Valve 4G Ghidini 6162 Two-way MIGNON ball valve with vent connection for small bore lines from 1/4” to 1/2”. The body is AISI 316L / 1.4404 stainless steel, with ISO 228-1 threaded ends and Virgin PTFE seats. Technical Characteristics Pressure class: PN40 Temperature range: -20°C to +160°C Port configuration: full bore or reduced bore,...

View

3 Way (T) Ball Valve - 3001 Series | 4G Ghidini

4G Ghidini

3-Way Ball Valve 4G Ghidini 2830, L-Port, PN250/PN400 The 2830 is a three-way ball valve with L-port configuration, designed for flow diversion between two lines (not for mixing). Full bore design. Body, ball, and stem are manufactured from AISI 316L / 1.4404. Available in sizes 1/4”–1” and pressure classes PN250 or PN400. Supplied with internal threads...

View

Ball Valve 6160 Series | 4G Ghidini

4G Ghidini

Ghidini 6160 4G MIGNON Ball Valve Two-way MIGNON ball valve for small isolation lines, manufactured with AISI 316L / 1.4404 stainless steel body and ISO 228-1 threaded connections. The valve is intended for on/off service in auxiliary circuits, sampling lines and low-flow process services. Technical characteristics Sizes: 1/4” to 1/2” Pressure rating:...

View

3 Way (T) Ball Valve - 3030 Series | 4G Ghidini

4G Ghidini

Ghidini 3030 3-Way Ball Valve 4G, T-Port The 3030 is a stainless steel three-way ball valve with a T-port ball and 4-seat configuration. Designed for distribution, selection, or interconnection of three process lines, depending on the ball’s flow plan. Not intended for proportional flow control applications. Construction Body, ball, and stem: AISI 304L /...

View

Showing 217-240 of 313 item(s)