List of products by brand B-Safety

B-Safety – Technical profile of an emergency shower and eyewash safety equipment manufacturer

B-Safety is a manufacturer of emergency showers, eyewash stations and safety equipment for industrial, laboratory, chemical, pharmaceutical, food and process environments. Its products are used where personnel may be exposed to hazardous chemicals, corrosive liquids, dust, heat or contamination.

The main product areas include:

  • emergency body showers,
  • eyewash stations,
  • face and eye wash units,
  • combination shower / eyewash units,
  • laboratory safety showers,
  • freeze-protected emergency showers,
  • tank showers,
  • decontamination equipment,
  • safety cabinets and accessories.

Emergency showers must deliver sufficient water flow immediately after activation and remain accessible without obstacles. Eyewash units must provide controlled flow for both eyes without causing mechanical injury. Combination units are used where both full-body exposure and eye exposure are possible.

Selection is not based only on installation location. The engineer must consider the hazardous substance, exposure scenario, ambient temperature, water supply pressure, drainage, freeze protection, corrosion resistance, activation method, visibility and maintenance testing.

For outdoor or low-temperature installations, freeze-protected or heated units may be required. For remote areas, tank showers can provide an independent water supply when a stable water network is not available.

Technical documentation should include:

  • water flow rate,
  • inlet pressure,
  • material of wetted parts,
  • activation method,
  • compliance with applicable emergency shower standards,
  • installation drawing,
  • inspection and test procedure,
  • spare parts and maintenance instructions.

B-Safety products are relevant for EHS managers, plant engineers, laboratory planners, chemical process engineers and maintenance departments responsible for occupational safety infrastructure.

Emergency shower above door inst., body shower with hand-held eye shower - ClassicLine - BR 873 085 | B-Safety

Emergency shower above door inst., body shower with hand-held eye shower - ClassicLine - BR 873 085 | B-Safety
B-Safety BR 873 085 ClassicLine Wall-mounted emergency safety shower and single-head 45° hand-held eye wash unit, designed for installation above doors or passageways where wall space is limited. Suitable for combined body drenching and targeted eye/face rinsing in industrial environments with spatial constraints. Technical Data Series: ClassicLine...

Emergency shower above door inst., body shower with hand-held eye shower - ClassicLine - BR 874 085 | B-Safety

Emergency shower above door inst., body shower with hand-held eye shower - ClassicLine - BR 874 085 | B-Safety
B-Safety BR 874 085 ClassicLine Wall-mounted emergency safety shower and dual-head hand-held eye wash unit, designed for installation above doors or passage openings. Suitable for locations with limited wall space, where floor-mounted bases and fixed eye wash basins are not feasible. Technical Data Type: ClassicLine, overhead door installation Materials:...

Body safety shower above door installation - ClassicLine - BR 084 085 | B-Safety

Body safety shower above door installation - ClassicLine - BR 084 085 | B-Safety
Body Safety Shower B-Safety BR 084 085 ClassicLine The B-Safety BR 084 085 ClassicLine is an emergency body safety shower designed for installation above doorways, featuring exposed piping and pull-rod activation. The ball valve can be positioned on either side of the door, which is critical for installations at laboratory exits, chemical storage areas,...

Body safety shower above door installation in 2850 mm height - ClassicLine - BR 084 185 | B-Safety

Body safety shower above door installation in 2850 mm height - ClassicLine - BR 084 185 | B-Safety
B-Safety BR 084 185 ClassicLine Body Safety Shower Body safety shower designed for installation above doorways, featuring exposed piping and increased mounting height at 2850 mm ±100 mm. This configuration is suitable for areas where the door serves as an access or egress point and unobstructed passage beneath the shower arm is required. Technical...

Emergency shower above door installation, body shower with eye shower - ClassicLine - BR 871 085 | B-Safety

Emergency shower above door installation, body shower with eye shower - ClassicLine - BR 871 085 | B-Safety
B-Safety BR 871 085 ClassicLine Wall-mounted emergency safety shower and eye wash combination unit, designed for installation above doors or passageways. This configuration is specified where no side wall is available in the operating zone or where the wash station must be positioned at laboratory, chemical storage, or process area entrances. Technical...

Industrial safety shower, freestanding, body safety shower with eye shower - ClassicLine - BR 832 085 | B-Safety

Industrial safety shower, freestanding, body safety shower with eye shower - ClassicLine - BR 832 085 | B-Safety
B-Safety BR 832 085 ClassicLine Floor-mounted emergency safety shower with integrated eye wash station, designed for locations requiring both body and eye decontamination from a single access point. Not a tank-fed unit; requires connection to a 1 ¼” female water supply, with top or bottom inlet for installation in circulating water lines. Technical Data...

Industrial safety shower, freestanding, body safety shower with eye shower with bowl - ClassicLine - BR 837 085 | B-Safety

Industrial safety shower, freestanding, body safety shower with eye shower with bowl - ClassicLine - BR 837 085 | B-Safety
B-Safety BR 837 085 ClassicLine Floor-mounted emergency safety shower with integrated fixed eyewash station and ABS bowl. Designed for combined body and eye decontamination at permanent safety points in industrial environments, including chemical processing, laboratories, acid/alkali storage, and container filling stations. Technical Data Type:...

Body safety shower with pull rod diversion - ClassicLine - BR 088 085 | B-Safety

Body safety shower with pull rod diversion - ClassicLine - BR 088 085 | B-Safety
B-Safety BR 088 085 ClassicLine Body Safety Shower Wall-mounted emergency body shower with exposed piping and activation via a pull rod with angular deflection. The configuration allows the valve to be installed either to the right or left of a door or access corridor, enabling the operator to activate the shower from a safe movement path. Designed for...

Body safety shower ceiling mounted, exposed pipework - ClassicLine - BR 073 085 | B-Safety

Body safety shower ceiling mounted, exposed pipework - ClassicLine - BR 073 085 | B-Safety
B-Safety BR 073 085 ClassicLine – Ceiling-Mounted Safety Shower Arm Ceiling-mounted safety shower arm for body drenching, designed for installations with overhead water supply. Features exposed piping and a ¾" female water connection. The configuration is intended for environments where visible pipework is required for inspection, flow testing, and...

Body safety shower ceiling mounted, recessed version - ClassicLine - BR 075 085 | B-Safety

Body safety shower ceiling mounted, recessed version - ClassicLine - BR 075 085 | B-Safety
B-Safety BR 075 085 ClassicLine – Recessed Ceiling-Mounted Safety Shower Arm Ceiling-mounted safety shower arm for body drench applications, designed for recessed installation. Water supply connection is ¾" male. This configuration is specified when supply piping is routed above the ceiling, exposing only the shower head, arm, and cover escutcheon....

Body safety shower ceiling mounting, Exposed pipework - ClassicLine - BR 085 085 | B-Safety

Body safety shower ceiling mounting, Exposed pipework - ClassicLine - BR 085 085 | B-Safety
Ceiling-Mounted Emergency Safety Shower B-Safety BR 085 085 ClassicLine Ceiling-mounted emergency body shower with exposed piping and ¾" female water inlet. This configuration is specified where hydraulic supply is routed from above and visible, inspectable piping is required for maintenance or periodic inspection. Installation height is 2445 mm ±100 mm,...

Body safety shower ceiling mounting, Recessed version - ClassicLine - BR 083 085 | B-Safety

Body safety shower ceiling mounting, Recessed version - ClassicLine - BR 083 085 | B-Safety
Ceiling-Mounted Body Safety Shower B-Safety BR 083 085 ClassicLine The BR 083 085 ceiling-mounted safety shower is designed for embedded installation with water supply from above. This configuration is specified for locations where wall-mounted piping is not feasible or where vertical, unobstructed flow coverage is required in the workspace. Technical...

Eye/Face wash unit with bowl and lid - ClassicLine - BR 852 085 | B-Safety

Eye/Face wash unit with bowl and lid - ClassicLine - BR 852 085 | B-Safety
B-Safety ClassicLine BR 852 085 – Eyewash/Facewash Station with Bowl and Cover The BR 852 085 is a fixed eyewash/facewash unit designed for permanent installation in industrial and laboratory environments. It features a collection bowl, protective cover, and vertical mounting column. The integrated bowl ensures controlled drainage of wash water,...

Industrial safety shower, freestanding, floor mounted, body safety shower - ClassicLine - BR 830 085 | B-Safety

Industrial safety shower, freestanding, floor mounted, body safety shower - ClassicLine - BR 830 085 | B-Safety
Self-Contained Emergency Safety Shower B-Safety BR 830 085 Floor-mounted emergency body shower designed for industrial facilities, laboratories, chemical storage areas, and loading points where immediate personnel decontamination is required following exposure to hazardous substances. Technical Specifications Series: ClassicLine Type: Floor-standing,...

Eyewash tank station frostprotected/heated 60-litre - ClassicLine - BR 955 005 | B-Safety

Eyewash tank station frostprotected/heated 60-litre - ClassicLine - BR 955 005 | B-Safety
B-Safety ClassicLine BR 955 005 – Heated Eyewash Station 60 L The BR 955 005 is a self-contained eyewash station with a 60-liter tank, integrated into a wall-mounted heated cabinet. It is specified for locations lacking direct water supply at the hazard point or where independent first-flush capability is required in low ambient temperatures. Technical...

Frost-protected self-draining body safety shower - ClassicLine - BR 885 085 | B-Safety

Frost-protected self-draining body safety shower - ClassicLine - BR 885 085 | B-Safety
B-Safety BR 885 085 ClassicLine Wall-mounted emergency body shower with frost protection via automatic self-draining. Designed for outdoor or cold industrial locations where residual water must not remain in the arm after operation. This unit is intended solely for body drenching; no eyewash function is included. Technical Data Type: ClassicLine,...

Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety

Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety
B-Safety ClassicLine BR 880 085 – Self-Draining Eye Wash Shower with Anti-Freeze Protection The BR 880 085 is a wall-mounted emergency eye wash unit equipped with dual 45° spray heads. It is engineered for installations where water stagnation in the supply line may result in freezing. Automatic drainage is achieved via a ¾” three-way ball valve, which...

Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety

Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety
B-Safety ClassicLine BR 712 020 – Handheld Eye Wash Unit The BR 712 020 is a bench-mounted, handheld emergency eye wash designed for industrial environments with risk of eye exposure to chemicals, particulates, or dust. The unit features a single spray nozzle and is intended for process areas requiring localized decontamination. Flow rate is regulated at...

Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety

Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety
B-Safety ClassicLine BR 712 025 – Handheld Eye Wash Unit The BR 712 025 is a handheld emergency eye wash device equipped with a single spray nozzle. Designed for wall or bench installation, it is intended for immediate local rinsing of eyes following exposure to chemicals, particulates, process vapors, or airborne contaminants. Typical installation points...

Hand-held eye shower with one spray head - ClassicLine - BR 712 035 | B-Safety

Hand-held eye shower with one spray head - ClassicLine - BR 712 035 | B-Safety
B-Safety ClassicLine BR 712 035 – Handheld Eye Wash Unit The BR 712 035 is a handheld emergency eye wash device equipped with a single spray nozzle. Designed for angled installation (45° mounting arm) or integration into laboratory workstations, it is suitable for environments with limited space. The assembly includes a 1.5 m flexible hose with stainless...

Hand-held eye shower with one spray head 45° - ClassicLine - BR 713 020 | B-Safety

Hand-held eye shower with one spray head 45° - ClassicLine - BR 713 020 | B-Safety
B-Safety ClassicLine BR 713 020 – 45° Handheld Eye Wash Unit The BR 713 020 is a bench-mounted handheld eye wash designed for laboratory workstations, dosing stations, and chemical processing points. It features a single spray nozzle set at a 45° angle, allowing the operator to direct the flow without leaning over the hazard zone. This configuration...

Hand-held eye shower with one spray head 45° - ClassicLine - BR 713 025 | B-Safety

Hand-held eye shower with one spray head 45° - ClassicLine - BR 713 025 | B-Safety
B-Safety ClassicLine BR 713 025 – 45° Handheld Eye Wash Unit The BR 713 025 is a handheld emergency eye wash device equipped with a single 45° angled spray nozzle. Designed for wall or bench mounting using the supplied bracket, it is intended for workstations requiring immediate, directional rinsing of eyes with potable water, positioned near sources of...

Hand-held eye shower with two spray head - ClassicLine - BR 715 035 | B-Safety

Hand-held eye shower with two spray head - ClassicLine - BR 715 035 | B-Safety
B-Safety ClassicLine BR 715 035 – Handheld Eye Wash with Dual Spray Heads The BR 715 035 is a handheld emergency eye wash unit equipped with two spray heads, designed for angled mounting or integration into laboratory fume hoods. This configuration enables simultaneous irrigation of both eyes and is suitable for laboratory benches, chemical dosing...

Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety

Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety
B-Safety ClassicLine BR 714 020 – Handheld Eye Wash 45° with Dual Spray Heads The BR 714 020 is a laboratory-grade handheld eye wash unit equipped with two spray heads set at a 45° angle. Designed for benchtop installation in laboratory workstations, chemical dosing stations, and production areas where simultaneous irrigation of both eyes is required. The...
Showing 1-24 of 128 item(s)