Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety - B-Safety

Hand-held eye shower with one spray head - ClassicLine - BR 712 025 | B-Safety

B-Safety ClassicLine BR 712 025 – Handheld Eye Wash Unit

The BR 712 025 is a handheld emergency eye wash device equipped with a single spray nozzle. Designed for wall or bench installation, it is intended for immediate local rinsing of eyes following exposure to chemicals, particulates, process vapors, or airborne contaminants. Typical installation points include laboratory workstations, dosing stations, and maintenance areas where rapid decontamination is required.

Technical Specifications

  • Flow rate: 7 l/min
  • Operating pressure: 1.5–5 bar
  • Minimum flow pressure: 1.5 bar
  • Water connection: ½” female
  • Flexible hose: 1.5 m, stainless steel braided
  • Handle/head dimensions: 240 × 65 × 65 mm

The integrated flow regulator maintains a consistent spray pattern within the specified pressure range. The handle valve is non-self-closing, allowing continuous operation during rinsing without the need for sustained manual pressure.

Materials and Wetted Parts

Wetted components are manufactured from DZR brass CW724R, suitable for potable water installations with reduced dezincification risk. The spray head and flow regulator are POM, while hose fittings utilize CW617N / CW614N brass.

Standards and Installation

Compliant with EN 15154-2:2006 and ANSI Z358.1-2014. Includes anti-pollution device for network protection; references to DIN 1988, EN 1717, and DIN-DVGW NW-0417CL0263. Recommended installation height: 770 mm ±200 mm.

Industrial Applications

Suitable for chemical laboratories, dosing stations, CIP areas, paint shops, industrial laundries, HVAC/water treatment units, and maintenance points requiring targeted eye rinsing near hazard sources.

Comparison with Fixed Stations

The handheld version is selected where directional flexibility or bench mounting is required. In high-risk zones with potential full-body exposure, combined installation with a plumbed safety shower should be evaluated.

Datasheet and documents

Description

Technical Specifications

  • Material: brass, plastic
  • Color: grey, green, orange
  • Dimensions (H x W): 240 x 65 mm
  • Hose-Length: 1500 mm
  • Operating pressure: 1.5 to 5 bar
  • Flow rate: 7 l/min
  • Water inlet: ½” female

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The hand-held eye shower is equipped with the B-SAFETY high-performance spray head, which not only meets the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

With the enclosed B-SAFETY combination bracket, the hand-held eye shower can be mounted on the wall or also on the table. The robust stainless steel-coated hose in 1.5 meter length ensures good usability of the shower. The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure present. The backflow preventer built into the handle of the shower provides additional protection of the drinking water network.

Technical Description

  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray head for large-scale dispersion of water, with plastic spray plate, low calcification, with rubber sleeves and sealed dust caps
  • integrated flow regulation 7 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • robust table and wall mounting bracket with positioning of the shower, accessories M28 x 1,5 x 80 mm made of stainless steel incl. fastening-parts kit with nut M28 x 1,5 mm and 2 screws M5 for mounting difficult to access, sealing to table surface with O-Ring
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • mounting height 770 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW