Body safety shower with pull rod diversion - ClassicLine - BR 088 085 | B-Safety B-Safety - 1
Body safety shower with pull rod diversion - ClassicLine - BR 088 085 | B-Safety B-Safety - 1

Body safety shower with pull rod diversion - ClassicLine - BR 088 085 | B-Safety

B-Safety BR 088 085 ClassicLine Body Safety Shower

Wall-mounted emergency body shower with exposed piping and activation via a pull rod with angular deflection. The configuration allows the valve to be installed either to the right or left of a door or access corridor, enabling the operator to activate the shower from a safe movement path. Designed for rapid deployment in industrial environments where chemical exposure risk is present.

Technical Specifications

  • Water connection: ¾" female
  • Arm projection: 630 mm
  • Installation height: 2345 mm ±100 mm
  • Dynamic operating pressure: 1.5–3 bar
  • Standard flow rate: 50 l/min
  • Available flow rates: 75 l/min or 110 l/min
  • Pull rod: 700 mm with control ring

Construction and Materials

Wall flange, connecting pipe, and arm are stainless steel with green chemically resistant coating. The ball valve is dezincification-resistant brass, DIN-DVGW tested and certified. Shower head is chemically resistant plastic, self-draining, with integrated flow regulator. All wetted parts are selected for compatibility with typical decontamination media.

Selection Criteria

The 50 l/min version is suitable for standard body decontamination. 75 and 110 l/min variants are specified where risk assessment requires higher hydraulic capacity. Prior to installation, verify dynamic pressure, available flow for at least 15 minutes, distance from hazard zone, and flushing water temperature. Guidelines specify access within 5 s and 5–10 m from hazard point.

Standards and Use

Referenced standards: EN 15154-2:2006, EN 15154-5:2019, ANSI Z358.1-2014, DIN-DVGW, GOST-R. Technical documentation also cites EN 15154-1:2006.

Applicable for chemical laboratories, chemical storage, paint shops, CIP areas, water treatment units, and personnel transit points where lateral rod activation is preferable to direct vertical pull. Suitable for water as the process medium; not intended for steam or aggressive solvents. Maintenance should include periodic functional testing and inspection for leakage or actuator wear.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Projection: 630 mm
  • Installation height: 2345 mm (± 100 mm)
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

The integrated automatic flow regulator ensures a standard-compliant spray pattern regardless of the water pressure on site. With the enclosed safety sign according to EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is marked and visibility is improved. The viewing distance is 15 meter

DVGW
ISO9001_D_72

Technical Description

  • wall flange with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
  • connection pipe ¾“ of stainless steel, chemical resistant green powder coated, length 75 mm
  • ball valve made of dezincification-resistant brass, DIN-DVGW tested and certificated, with pull rod angle-diversion and wall bracket, can be mounted either on the right or left side of the door
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • holder for pull rod made of steel, chemical resistant green powder coated
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 2345 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72