Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety - B-Safety
Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety - B-Safety

Hand-held eye shower with one spray head - ClassicLine - BR 712 020 | B-Safety

B-Safety ClassicLine BR 712 020 – Handheld Eye Wash Unit

The BR 712 020 is a bench-mounted, handheld emergency eye wash designed for industrial environments with risk of eye exposure to chemicals, particulates, or dust. The unit features a single spray nozzle and is intended for process areas requiring localized decontamination. Flow rate is regulated at 7 l/min and operates within a supply pressure range of 1.5–5 bar, ensuring the spray pattern remains within application requirements for effective rinsing.

Technical Specifications

  • Water connection: ½” female thread
  • Flexible hose: 1.5 m, stainless steel braided (AISI 304)
  • Wet parts: brass (DZR CW724R)
  • Nozzle and flow regulator: plastic (POM)
  • Head/handle dimensions: 240 × 65 × 65 mm
  • Integrated anti-pollution device for potable water network protection

Standards and Compliance

Complies with EN 15154-2:2006 and ANSI Z358.1-2014. Certified under DIN-DVGW / DVGW NW-0417CL0263 and referenced to GOST-R. Safety signage per EN ISO 7010 and ASR A1.3.

Applications

Suitable for:

  • Chemical and quality control laboratories
  • Production areas handling acidic or alkaline solutions
  • Filling, dosing, or mixing stations
  • Engine rooms, maintenance workshops, and industrial parts washers
  • HVAC or water treatment installations with chemical dosing

Compatible with potable water. For installations requiring controlled rinse temperature, a thermostatic mixing valve (20–43 °C) with scald protection at 43 °C can be specified.

Installation and Maintenance Options

Bench mounting via M28×1.5×80 mm fitting, O-ring, and flange. Recommended installation height: 770 mm ±200 mm. Optional accessories: isolation ball valve, hose weight, IP65 flow switch, 230 V / 50 Hz alarm system.

FAQ

Does the valve close automatically?
No. The handle uses a non-self-closing valve; flow remains active during rinsing.

When is the handheld version selected?
For targeted rinsing, restricted access areas, or operator use at workbenches.

Datasheet and documents

Description

Technical Specifications

  • Material: brass, plastic
  • Color: grey, green, orange
  • Dimensions (H x W): 240 x 65 mm
  • Hose-Length: 1500 mm
  • Operating pressure: 1.5 to 5 bar
  • Flow rate: 7 l/min
  • Water inlet: ½” female

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The hand-held eye shower is equipped with the B-SAFETY high-performance spray head, which not only meets the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

With the enclosed table mounting accessory, the hand-held eye shower can be mounted on the table. The robust stainless steel-coated hose in 1.5 meter length ensures good usability of the shower. The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure present. The backflow preventer built into the handle of the shower provides additional protection of the drinking water network.

Technical Description

  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray head for large-scale dispersion of water, with plastic spray plate, largely scale-free, with rubber sleeves and sealed dust caps
  • integrated flow regulation 7 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • table mounting accessories M28x1,5x80mm made of stainless steel, incl. fastening-parts kit with nut M28x1,5mm and 2 screws M5 for mounting difficult to access, rosette plastic, green, sealing to table surface with O-Ring
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • mounting height 770 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW