Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety - B-Safety
Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety - B-Safety
Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety - B-Safety
Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety - B-Safety
Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety - B-Safety
Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety - B-Safety

Eye shower self-draining frost-protected - ClassicLine - BR 880 085 | B-Safety

B-Safety ClassicLine BR 880 085 – Self-Draining Eye Wash Shower with Anti-Freeze Protection

The BR 880 085 is a wall-mounted emergency eye wash unit equipped with dual 45° spray heads. It is engineered for installations where water stagnation in the supply line may result in freezing. Automatic drainage is achieved via a ¾” three-way ball valve, which discharges the downstream section when the unit is not in operation, minimizing freeze risk and microbial growth.

Technical Specifications

  • Flow rate: 14 l/min
  • Operating pressure: 1.5–5 bar
  • Minimum flow pressure: 1.5 bar
  • Water inlet: ¾” female
  • Wall projection: 265 mm
  • Installation height: 900 mm ±200 mm
  • Activation: rotary lever, 90° opening, non-self-closing

Construction and Operation

The assembly includes an 800 mm shaft extension, field-trimmable to accommodate wall thickness or installation depth. Rear wall connection is via stainless steel pipe with green chemically resistant coating. Spray heads are POM with elastomeric guards and dust caps, which open under water pressure. Integrated flow regulator maintains 14 l/min across the specified pressure range for consistent wash pattern.

Materials

  • Spray heads and flow regulator: POM
  • Ball valve: brass CW617N
  • Piping and escutcheon: stainless steel AISI 304
  • Shaft extension: aluminium
  • Signage: PVC membrane

Standards and Applications

Compliant with EN 15154-2:2006, ANSI Z358.1-2014, DIN 1988, EN 1717, and BGI/GUV-I 850-0. Eye wash signage per EN ISO 7010 / ASR A1.3; OPEN indicator is photoluminescent per DIN 67510.

Suitable for outdoor or cold industrial environments, chemical storage, loading stations, water treatment, sampling units, and areas requiring eye wash without stagnant water in the line.

Optional Equipment

Available options: maintenance valve ¾”, thermostatic mixing 20–43 °C, flow switch IP65, and alarm system 230 V / 50 Hz.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black, orange
  • Projection: 265 mm
  • Installation height: 900 mm
  • Operating pressure: 1.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of DIN EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure applied. The rubber sleeves around the shower head protect the person seeking help from impact injuries. Dust caps on the shower head protect against contamination and open automatically when the eye shower is actuated by the water pressure. The large holes in the shower heads prevent standing water and thus calcification.

DVGW
ISO9001_D_72

Technical Description

  • 3-way-ball-valve ¾” of brass that automatically drains the shower downwards when not in use, water inlet ¾” female
  • spindle extension, standard length 800 mm, can be shortened to the appropriate length on site
  • lever for ball valve
  • wall flange with 4 mounting holes made of stainless steel, chemical resistant green powder coated, water inlet ¾” female, from behind through the wall
  • connection pipe of stainless steel, chemical resistant green powder coated, length 75 mm
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, low calcification, incl. rubber sleeves and sealed dust caps, mounted over distributor fork
  • sign for eye shower according to DIN EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • mounting height 900 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717
  • according to ANSI Z358.1-2014 and DIN EN 15154-2:2006

Certification

DVGW    ISO9001_D_72