Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety - B-Safety

Hand-held eye shower with two spray head 45° - ClassicLine - BR 714 020 | B-Safety

B-Safety ClassicLine BR 714 020 – Handheld Eye Wash 45° with Dual Spray Heads

The BR 714 020 is a laboratory-grade handheld eye wash unit equipped with two spray heads set at a 45° angle. Designed for benchtop installation in laboratory workstations, chemical dosing stations, and production areas where simultaneous irrigation of both eyes is required. The angled spray heads facilitate ergonomic face positioning within the flow, minimizing operator strain during emergency use.

Technical Specifications

  • Flow rate: 14 l/min
  • Minimum flow pressure: 2.5 bar
  • Operating pressure: 2.5–5 bar
  • Water connection: ½” female
  • Dimensions: 310 × 145 × 65 mm
  • Flexible hose: 1.5 m, stainless steel braided
  • Mounting height: 700 mm ±200 mm

Operation and Materials

The handle incorporates a non-self-closing valve to maintain continuous flow during use. Integrated flow regulator ensures consistent spray pattern within 2.5–5 bar pressure range. Wetted parts: DZR brass CW724R; spray heads and flow regulator: POM; hose sheath: AISI 304; fittings: CW617N / CW614N.

Standards and Network Protection

Compliant with EN 15154-2:2006 and ANSI Z358.1-2014. Integrated non-return valve for potable water protection. References: DIN 1988, EN 1717, DIN-DVGW NW-0417CL0263, GOST-R. Signage per EN ISO 7010 and ASR A1.3.

Applications

Suitable for clean water supply in chemical laboratories, QC benches, mixing stations, chemical filling areas, water treatment facilities, and maintenance zones with risk of eye exposure to acids, alkalis, cleaning agents, or particulates.

Comparison: Dual vs. Single Head Variant

Dual spray head configuration is selected for simultaneous bilateral eye irrigation with symmetrical flow distribution. Single head variant is recommended for space-constrained installations or targeted rinsing.

Installation Options

Mounting via M28×1.5×80 mm fitting, nut, M5 screws, rosette, and O-ring seal at benchtop interface. Optional: isolation valve, hose weight, alternative hose lengths, IP65 flow switch, thermostatic mixing 20–43 °C, and 230 V / 50 Hz alarm module.

Datasheet and documents

Description

Technical Specifications

  • Material: brass, plastic
  • Color: grey, green, orange
  • Dimensions (H x W): 310 x 145 mm
  • Hose-Length: 1500 mm
  • Operating pressure: 2.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water inlet: ½” female

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The hand-held eye shower is equipped with two B-SAFETY high-performance shower heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

With the enclosed table mounting accessory, the hand-held eye shower can be mounted on the table. The robust stainless steel-coated hose in 1.5 meter length ensures good usability of the shower. The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure present. The backflow preventer built into the handle of the shower provides additional protection of the drinking water network.

DVGW
ISO9001_D_72

Technical Description

  • B-SAFETY ClassicLine hand-held eye shower with two spray heads 45°, table mounted
  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, low calcification, incl. with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • integrated automatic flow regulator 14 litres / minute for a standard-compliant blasting pattern at a specified working range of 2.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • table mounting accessories M28x1,5x80mm made of stainless steel, incl. fastening-parts kit with nut M28x1,5mm and 2 screws M5 for mounting difficult to access, rosette plastic, green, sealing to table surface with O-Ring
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • Mounting height 700 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72.png