Industrial safety shower, freestanding, floor mounted, body safety shower - ClassicLine - BR 830 085 | B-Safety - B-Safety
Industrial safety shower, freestanding, floor mounted, body safety shower - ClassicLine - BR 830 085 | B-Safety - B-Safety

Industrial safety shower, freestanding, floor mounted, body safety shower - ClassicLine - BR 830 085 | B-Safety

Self-Contained Emergency Safety Shower B-Safety BR 830 085

Floor-mounted emergency body shower designed for industrial facilities, laboratories, chemical storage areas, and loading points where immediate personnel decontamination is required following exposure to hazardous substances.

Technical Specifications

  • Series: ClassicLine
  • Type: Floor-standing, free-standing support
  • Height: 2300 mm
  • Arm projection: 630 mm
  • Water connection: 1 ¼” female
  • Operating pressure: 1.5–3 bar dynamic
  • Flow rate: 50 l/min (body)
  • Variants: 75 l/min and 110 l/min available for higher risk categories per EN 15154-5:2019

Construction and Materials

Support pipe: AISI 304 stainless steel with green chemical-resistant powder coating. Connection fittings: AISI 316 stainless steel. Ball valve: ¾” DZR brass CW724R, suitable for dezincification resistance in water networks. Spray head: POM, self-draining, designed to minimize scale deposition.

Operation and Actuation

Activation via 700 mm stainless steel pull rod with control ring. Optional accessories: foot platform actuator, IP65 flow switch, EX Zone 1 & 2 version, pre-assembled alarm switch for body shower monitoring.

Standards and Certifications

Compliant with EN 15154-1:2006, EN 15154-5:2019, and ANSI Z358.1-2014. Also referenced with DIN-DVGW/DVGW approval NW-0416CL0425 and GOST-R certification.

Applications

  • Chemical industry and mixing areas
  • R&D and quality control laboratories
  • Water treatment facilities
  • Acid, alkali, and cleaning agent storage
  • Chemical loading/unloading zones

Thermal Management and Maintenance

For stable water temperature, can be integrated with thermostatic mixing valve (20–43°C), scald protection at 43°C, anti-freeze valve, and over-temperature protection valve. Maintenance should include periodic flow testing, leakage inspection at the ball valve, and verification of self-draining function at the spray head.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the ClassicLine series are made of high-quality materials and are just as suitable for use in laboratories and research as they are for rough use in industry. B-SAFETY’s green chemical-resistant polyester powder coating has proven itself in many aggressive environments and is resistant to many acids and alkalis.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcificationand maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, chemical resistant green powder coated, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, chemical resistant green powder coated, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” made of dezincification-resistant brass, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72