Ball Valves

IPC Class 150/300 Full-Bore Ball Valve Types 315/330/415/430 Two-piece full-bore flanged ball valve for on/off isolation in industrial liquid and gas services. The valve is supplied with ANSI flanged ends, pressure classes 150 lb and 300 lb, in sizes from 1/2 in to 8 in. Construction and Materials Body materials: ASTM A216 WCB for carbon steel piping...

View

Ball valve PN63 (Gas) - Type 2001-IMF/S/SN

PN63 Ball Valve for Gas Service Type 2001-IMF/S/SN Type 2001-IMF/S/SN is a two-piece, full-bore ball valve for isolation duties in industrial gas pipework. It is supplied with BSP or NPT threaded ends and a nominal pressure rating of PN63 / 1000 WOG, subject to the applicable pressure-temperature curve. Technical Data Valve type: two-piece floating ball...

View

Ball Valve - Type 45/46/47/52 | IVR

IVR Type 45/46/47/52 Brass Full-Bore Ball Valve Brass full-bore ball valve for on/off isolation in hydronic circuits, HVAC services, compressed-air distribution and PED 2014/68/EU Class 1 liquids. Types 45, 46, 47 and 52 are mainly differentiated by end connection configuration. Construction and Standards Body material: CW617N brass Seat material: PTFE...

View

Ball Valve - Type 77/78 | IVR

IVR Type 77/78 Flanged Ball Valve Flanged PN 16 ball valve manufactured from EN-GJL-250 cast iron, intended for on/off isolation service in industrial and building-services pipework. IVR types 77 and 78 are used in hydronic systems, superheated water circuits, compressed air lines, water distribution, non-gaseous hydrocarbons and oil services, subject to...

View

Ball Valve - Type 80 | IVR

IVR Type 80 wafer-pattern ball valve The IVR Type 80 is a 2-way wafer-pattern ball valve with DIN flanged installation, used for flow isolation in industrial, HVAC and building services pipework. The valve is rated PN 16, with body material EN-GJL-250 and PTFE seats. Construction data Valve type: 2-way ball valve, on/off service Connection: wafer type...

View

Ball Valve - Type 100/A/LD | IVR

IVR Type 100/A/LD Ball Valve The IVR 100/A/LD is a 2-way brass ball valve intended for medium- and low-pressure gas distribution networks and hydrocarbon service. The valve body is specified as CW617N brass, with PTFE seats and a nominal pressure rating of PN 20. Technical Data Valve type: 2-way full shut-off ball valve Body material: CW617N brass Seat...

View

Ball Valve - Type 230 | IVR

IVR Type 230 Ball Valve The IVR 230 is a 2-way, full-bore ball valve with female BSP threaded ends and an ISO 5211 mounting pad for actuator installation. It is used for isolation duty in hydraulic, HVAC, compressed-air and auxiliary industrial services. Construction Body material: CW617N brass Connections: BSP female / female threaded ends Design...

View

Ball Valve - Type 685 | IVR

IVR Type 685 Ball Valve The IVR 685 is an AISI 316L stainless steel ball valve, PN 16, with DIN flanged connections and an ISO 5211 mounting interface for actuator installation. It is used for on/off isolation in industrial piping systems where stainless steel wetted parts are required. Construction Body material: AISI 316L stainless steel Connection:...

View

Ball Valve - Type 954/LB/LN/P/PLUS/A/A FB/A FN/LD | IVR

IVR Type 954 Full-Bore Ball Valve The IVR 954 is a full-bore brass ball valve for on/off isolation in hydraulic, HVAC and auxiliary industrial services. The valve has female/female threaded ends to ISO 228-1 and is typically selected where low pressure drop and straightforward manual isolation are required. Construction and Standards Body material:...

View

Ball Valve 3-pieces - Type 140/141/142/143 | ICP

ICP 140/141/142/143 3-Piece Ball Valve Full-bore stainless steel 3-piece ball valve for on/off isolation in industrial liquid and gas services. The split body design allows access to the centre section without complete removal of the pipework, reducing intervention time during maintenance. Technical data Sizes: 1/4”–4” / DN8–DN100 Body, ball and stem:...

View

Ball Valve 3-pieces - Type 140/141/142/143 IMF | ICP

ICP 140/141/142/143 IMF Three-Piece Ball Valve Full-bore isolation ball valve for industrial liquid and gas services. The three-piece body allows removal of the centre section for inspection of seats, body gaskets and ball without complete removal of the pipework. Size range: 1/4”–4” / DN8–DN100. Main materials: stainless steel 1.4408 / CF8M body and AISI...

View

Ball Valve Class 800/1500 - Type 800/81500 FB | JC

JC Valves

JC Type 800/81500 FB Ball Valve Class 800/1500 Two-way, three-piece, bolted-body, full-bore ball valve for high-pressure process lines. Available in ASME Class 800 and Class 1500 with BSP, NPT, socket-weld or butt-weld ends. Body materials include ASTM A105N, ASTM A352 LF2 and ASTM A479 Type 316. Standard seat configuration: TFM + 25% glass fibre....

View

Ball valve Class 800/1500 - Type 400/41500 | JC

JC Valves

JC Type 400/41500 Class 800/1500 Ball Valve Two-way monoblock ball valve with welded body construction and full bore flow path for high-pressure process lines. Available with BSP, NPT, socket weld or butt weld ends. Pressure classes are Class 800 and Class 1500. Body materials include ASTM A105N, ASTM A352 LF2 and ASTM A479 Type 316. Standard seat...

View

Ball Valve wafer - Type FA1 | ADLER

ADLER FA1 Wafer Ball Valve The ADLER FA1 is a full-bore wafer-type ball valve for flow isolation in industrial pipework where a short face-to-face dimension is required between flanges. Key Technical Data Sizes: DN15–DN300 Pressure ratings: PN10–PN40, ANSI Class 150–300 Body materials: ASTM A105, ASTM A479 304/304L or 316/316L Ball materials: stainless...

View

Ball Valve wafer - Type FA2 | ADLER

ADLER FA2 Wafer Full-Bore Ball Valve The ADLER FA2 is a full-bore wafer-pattern ball valve for installation between pipe flanges. It is used for isolation service in liquid, gas and steam systems where a shorter face-to-face length is required compared with a conventional flanged ball valve. Technical Data Nominal sizes: DN15 to DN300 Pressure classes:...

View

Ball Valve wafer - Type FB1 | ADLER

ADLER FB1 Wafer Type Ball Valve The ADLER FB1 is a full-bore wafer type ball valve for flow isolation in steam, water, compressed air and compatible industrial fluids. It is installed between flanges and uses a reduced face-to-face length compared with a fully flanged ball valve. Technical Data Nominal sizes: DN15 to DN300 Pressure rating: PN16 to PN160...

View

Ball Valve wafer - Type FB2 | ADLER

ADLER FB2 Wafer Full-Bore Ball Valve The ADLER FB2 is a full-bore wafer-type ball valve for installation between DIN or ANSI flanges. It is used as an isolation valve in steam, water, compressed air and industrial fluid lines, subject to compatibility with the body, ball, stem and seat materials. Technical Data Nominal sizes: DN15–DN300 Pressure...

View

Ball Valve wafer - Type FC1 | ADLER

ADLER FC1 Wafer Ball Valve The ADLER FC1 is a full-bore wafer ball valve for isolation duty on higher-pressure industrial lines. It is installed between EN 1092-1 or ANSI B16.5 flanges and covers PN63–PN160 and ANSI Class 600–1500 applications. Technical Characteristics Nominal sizes: DN15–DN300 Body materials: ASTM A105, ASTM A479 304/304L, ASTM A479...

View

Ball Valve wafer - Type FC2 | ADLER

ADLER FC2 Wafer Full-Bore Ball Valve Wafer-type full-bore ball valve for on/off isolation in industrial piping systems with elevated pressure ratings. The short body pattern is installed between DIN or ANSI flanges and reduces face-to-face length compared with conventional flanged ball valves. Technical Data Nominal sizes: DN15–DN300 Pressure ratings:...

View

Ball Valve Split body - Type FE2 | ADLER

ADLER FE2 Split Body Ball Valve The ADLER FE2 is a two-piece, split body, full bore ball valve for on/off isolation in industrial ANSI Class 150 piping. The range covers DN15 to DN200 and is available with carbon steel, stainless steel or special alloy body materials, selected according to fluid compatibility and plant specification. Technical...

View

Ball Valve Split body - Type FG2 | ADLER

ADLER FG2 Split-Body Flanged Ball Valve The ADLER FG2 is a two-piece, split-body, full-bore ball valve for isolation duties on ASME/ANSI Class 300 flanged piping. Size range is DN15 to DN250, with body and trim configurations in carbon steel, stainless steel, and selected alloy steels. Technical Characteristics Connection: ASME/ANSI flanged ends...

View

Ball Valve Split body - Type FH2 | ADLER

ADLER FH2 Split Body Ball Valve The ADLER FH2 is a 2-piece, split body, full bore ball valve for isolation service on ANSI Class 600 flanged lines. Size range covers DN15–DN150, with body materials including carbon steel, stainless steel and special alloy executions. Technical Characteristics Connection: ANSI flanged ends Pressure class: 600 lb...

View

Ball Valve Split body - Type FM2 | ADLER