Ball Valve 6060 Series | 4G Ghidini

4G Ghidini 6060 Ball Valve

The 6060 type is a 2-way 4G Ghidini ball valve used for flow isolation in industrial piping systems. It belongs to the stainless-steel 2-way ball valve range and is typically applied in food, chemical, pharmaceutical, process water and utility services.

Engineering Function

The valve is intended for on/off duty, not for continuous throttling. Selection should be based on the actual process envelope, including:

• pipeline DN and connection type
• operating and design pressure
• fluid temperature range
• chemical compatibility of body, ball, seats and seals
• manual operation or actuator-ready configuration
• cleanability, drainage and maintenance access

Suitable Media

Typical services include water, inert gases, compatible chemical liquids, food products and beverages. For steam, hot water or thermal fluids, the pressure/temperature limits and seat material rating must be checked against the valve datasheet.

Typical Industrial Applications

• pump, skid and equipment isolation
• process water and utility headers
• CIP/SIP lines where permitted by materials and temperature limits
• chemical dosing and transfer lines
• stainless-steel process piping in food and beverage plants
• manual isolation upstream or downstream of instruments and strainers

Standards, Materials and Documentation

Depending on the selected execution, the valve may be supplied with stainless-steel wetted parts, soft seats such as PTFE-based materials, and documentation such as material certificates to EN 10204. Actuated versions or actuator-ready variants may use an ISO 5211 mounting interface. Pressure equipment classification, declarations and any ATEX or hygienic requirements must be confirmed for the specific order code.

Variants and Selection Notes

• Manual lever versions are used where local operation is sufficient.
• Pneumatic or electric actuation is selected for remote isolation, interlocking or batch sequencing.
• Seat and seal selection depends on temperature, media, cleaning chemicals and allowable leakage.
• End connections must match the piping standard used on site, such as threaded, welded, clamp or flanged arrangements where available.

Maintenance and Leakage Considerations

Inspection should focus on the seats, stem seal and end connections. Prolonged operation in a partially open position is not recommended because it can erode or deform the seats, increase torque and create uncontrolled pressure drop. Any leakage trend should be assessed against the service fluid, cycle frequency and cleaning regime.

FAQ

Is it a control valve?
No. It is a quarter-turn isolation valve for open/closed service.

Where is it normally used?
In stainless-steel industrial lines where fast and repeatable flow shut-off is required.

Can it be fitted with an actuator?
Yes, where the selected variant provides a suitable mounting arrangement, pneumatic or electric actuators can be installed, typically using an ISO 5211 interface.