Type 1930 is a high-pressure, full-bore, 2-way ball valve with an ISO 5211 / DIN 3337 mounting interface for direct installation of a pneumatic or electric actuator. The valve body is manufactured from AISI 316L / 1.4404 stainless steel and is used where automated on/off isolation is required under high operating pressure.
The 1930 is selected for high-pressure lines requiring remote operation, interlocking, or integration into a process control system. It is intended for isolation service, not flow throttling.
The ISO 5211 / DIN 3337 interface allows direct mounting of pneumatic rack-and-pinion actuators or electric rotary actuators. Actuator sizing should account for differential pressure, operating frequency, media condition, safety factor, and required fail position.
Seat selection depends on temperature, pressure, chemical compatibility, cycling frequency, and acceptable leakage rate.
Type 1901 is the manual lever-operated version. Type 1930 is configured with an ISO 5211 actuator platform for automated isolation in process, utility, or OEM systems.
Available on request with:
When high-pressure on/off isolation must be operated by a pneumatic or electric actuator and integrated into a control or safety sequence.
No. The valve is designed for fully open or fully closed operation. For modulating control, a control valve or characterized ball design should be evaluated.
TWO-way ball valve
Drive: ISO 5211 – DIN 3337 foration for actuator
Connection: ISO 228 female/female thread
Flow: Full
Material: Aisi 316L (1.4404)
Measure: from 1/4” to 1”
Seals: Modified Virgin P.T.F.E.
Operating temperature: -20°C+170°C
Outer finish: Glazed
Screws for mounting actuator included
On request:
Antistatic device ATEX:
II 2G Ex h IIC T4 Gb
II 2D Ex h IIIC T135°C Db
M.O.C.A. CE 1935/2004
• Seals made of:
PTFE with glass -20°C+170°C
PTFE with inox -20°C+200°C
