Control Valve 3-Way G3F-I Series | Clorius Controls

Name: Control Valve 3-Way G3F-I Series | Clorius Controls
Brand: Clorius Controls
SKU: Control Valve 3-Way G3F-I Series | Clorius Controls

Clorius G3F-I – Three-Way Control Valve with Reversed Ports

The Clorius G3F-I is a flanged three-way control valve made from spheroidal graphite iron EN-GJS-400-15, designed for mixing or diverting flow in water, lubricating oil, and other liquid media. The I version features reversed port configuration, positioning the common port AB/1 on the left side of the installation. It is utilized in industrial processes, district heating, central heating systems, and marine installations.

Technical Specifications

DN80, DN100, DN125, DN150.
Nominal Pressure: PN16.
Flanges: EN 1092-2 PN16 or ANSI B16.5 Class 150.
Counter flanges: DIN 2633.
Seats and cone: aluminium bronze CuAl10Fe5Ni5.
Shaft: stainless steel.
O-ring: NBR 90.
Gasket: Reinz-AFM34.
Actuator connection: G1B as per ISO 228.
Flow characteristic: nearly linear.
Seat leakage: <0.5% of full flow as per VDI/VDE 2174.

Kvs and Stroke

DN	Kvs Mixing	Kvs Diverting	Stroke
DN80	80 m³/h	69 m³/h	11 mm
DN100	125 m³/h	108 m³/h	13 mm
DN125	215 m³/h	185 m³/h	18 mm
DN150	310 m³/h	267 m³/h	20 mm

In diverting operation, pressure drop increases by approximately 35% and Kvs decreases by 14% compared to mixing.

Port Operation

Port AB/1 is always the common port. Without an actuator, connection 2–1 is open and 3–1 is closed via spring. With shaft loading, A/2 closes and B/3 opens. With a thermostat V or normal direction motor, A closes on temperature rise and B opens.

Low Leakage Version

For LDCL cooling water systems, a reversed Low Leakage version DN80–DN300 is available. It features a soft-seat at AB–B, leakage class IV, and is specified as 0.0% leakage in this path. It is selected when internal leakage affects the cooling circuit's operating temperature.

Installation

The valve can be installed with a vertical or horizontal shaft. Actuator protection from moisture and vibrations is required, with a free height of 400 mm for AVM/AVF 234 or 745 mm for pneumatic actuators.

Standard (Options)

Connection (Options)

Flanged

Material (Options)

EN-GJS-400-15 (Nodular Cast Iron)

Pressure Rating (Options)

PN 10
PN 16

Flow (Options)

Diverting
Mixing

Datasheet and documents

Applications

Control valves type Low Leakage are designed for regulating of load dependant cylinder liner (LDCL), cooling water systems. The valve is designed with inverted ports for application with common port on the left side.

GENERALLY

Sizes: DN80, 100, 125, 150, DN200/175, 200, 200/250, 300

Nom. pressure: PN10 - 300/250-300 PN16 - 80-200

Material: Nodular cast iron

Material (components): Alu. bronze & Stainless steel

Flanges: EN 1092-2 JIS B 2210 10K DIN 2633

Applications

Control valves type G3F-I are designed for regulating of water, lubricating oil and other liquid media and can be mounted in the pipe system as either mixing or diverting valves. The valves are used in conjunction with our temperature regulators for controlling industrial processes, district and central heating plants and marine installations.