Three Pieces

Ghidini 5401 4G 2-Way Ball Valve Type 5401 is a manually operated, three-piece “Integral Seal” ball valve with DIN 32676 Reihe C clamp ends for BS/OD tube according to ASTM A270. It is used for on/off isolation in clean stainless-steel process lines where dismantling, inspection, and cleaning access are required. Technical characteristics Construction:...

View

Ball Valve 5430 Series | 4G Ghidini

Ghidini 5430 4G Two-Way Ball Valve The Ghidini 5430 is a three-piece “Integral Seal” two-way ball valve with DIN 32676 Reihe C clamp ends and an ISO 5211 / DIN 3337 actuator mounting interface. It is intended for automated on/off isolation in clean stainless-steel process lines. Technical characteristics End connection: clamp to DIN 32676 Tab. 4 Reihe...

View

Ball Valve 5501 Series | 4G Ghidini

4G Ghidini 5501 Ball Valve Two-way, three-piece, full-bore ball valve for line isolation in industrial and hygienic pipework. The body is AISI 316L / 1.4404 stainless steel with butt-weld ends to BS-OD / ASTM A270, DIN 11850 or ISO 1127 pipe standards. Operating Data Nominal sizes: DN10–DN100 or DN15–DN100, depending on version Pressure classes:...

View

Ball Valve 5530 Series | 4G Ghidini

Ghidini 5530 4G Ball Valve Two-way, three-piece, full-bore ball valve with Integral Seal design and rotating round butt-weld ends. The body is AISI 316L / 1.4404, intended for industrial pipework where welded installation is required and external leakage points must be reduced. Technical data Connections: butt-weld BS-OD / ASTM A270, DIN 11850, ISO 1127...

View

Radiamont 3 Piece Ball Valves Carbon Steel - 710 Series | Valpres

Valpres Radiamont 710 Carbon Steel Ball Valve Three-piece ball valve manufactured from ASTM A352 LCB for on/off isolation in industrial piping systems. It is used where threaded or welded end connections are required and where the valve body must be removable for maintenance without cutting the pipework. Technical Data Sizes: 1/4” to 4” Pressure rating:...

View

Radiamont 3 Piece Ball Valves Stainless Steel - 710 Series | Valpres

Valpres Radiamont 710 Stainless Steel Ball Valve Three-piece ball valve in stainless steel ASTM A351 CF8M, used for on/off isolation in process and utility pipework where maintainability and corrosion-resistant metallurgy are required. Technical characteristics Sizes: 1/4”–4” Pressure rating: PN64 up to 1/2”, PN40 up to 1”, PN25 up to 2”, PN16 up to 4”...

View

Radiamont 3 Piece Ball Valves - 710000 - 711000 - 712000 | Valpres

Valpres 710000 / 711000 / 712000 Three-Piece Ball Valve Three-piece stainless steel ball valve in ASTM A351 CF8M, used on threaded or welded DIN piping where isolation, maintainability and material compatibility are required. Technical data Sizes: 1/4” to 4” Pressure rating: PN64 up to 1/2”, PN40 up to 1”, PN25 up to 2”, PN16 up to 4” Temperature range:...

View

Radiamont 3 Piece Ball Valves - 710060 - 710061 - 710062 | Valpres

Valpres 710060 / 710061 / 710062 Three-Piece Ball Valve Three-piece full-bore ball valve in stainless steel ASTM A351 CF8M, intended for industrial pipework where the valve body may need to be inspected or serviced without removing the pipe ends from the line. Technical data Sizes: 1/4” to 4” Pressure rating: PN64 up to 1/2”, PN40 up to 1”, PN25 up to...

View

Radiamont 3 Piece Ball Valves - 710063 - 710064 - 710065 | Valpres

Valpres 710063 / 710064 / 710065 Ball Valve Three-piece full-bore ball valve in ASTM A352 LCB carbon steel for DIN process lines. The series is used where a maintainable in-line isolation valve is required with threaded, socket-weld or butt-weld end connections. Technical Characteristics Sizes: 1/4” to 4” Pressure rating: PN64 up to 1/2”, PN40 up to 1”,...

View

Radiamont 3 Piece Ball Valves - 713000 - 714000 - 715000 | Valpres

Valpres 713000 / 714000 / 715000 Three-Piece Ball Valve Three-piece ball valve manufactured in ASTM A352 LCB carbon steel for DIN piping systems with threaded or welded end connections. The split-body construction allows removal of the centre section for seat and seal maintenance without cutting or removing the pipe ends from the line. Technical Data...

View

Ball Valve with nipples - Type FR3 | ADLER

Adler

ADLER FR3 Three-Piece Ball Valve with Weld Ends The ADLER FR3 is a full-bore, three-piece ball valve for welded installation in PN40–PN63 process lines. Socket-weld (SW) and butt-weld (BW) ends are used where threaded joints or flanges are not preferred due to leakage risk, vibration, temperature cycling, or plant piping specifications. The three-piece...

View

Ball Valve Floating Ball | Fluitek

Fluitek Valves

Fluitek Floating Ball Valve Two-way floating ball valve for on/off isolation in industrial liquid and gas services. Line pressure pushes the ball against the downstream seat, generating the sealing load required for tight shut-off. Construction Two-piece or three-piece body, bolted or threaded construction Materials: carbon steel, stainless steel,...

View

Ball Valve threaded ends - 3 pcs full bore ball valve - 2025 | Genebre

Genebre 2025 three-piece ball valve The Genebre 2025 is a full-bore, three-piece ball valve with threaded BSP connections to ISO 7-1 / EN 10226-1. The valve body is stainless steel CF8M / 316, with PTFE + 15% glass-filled seats, Viton stem O-ring, PN63 pressure rating and operating temperature range from -25°C to +180°C. Sizes, connections and...

View

Ball Valve welded ends - 3 pcs full bore ball valve - Butt weld ANSI B 16.25 - 2026 | Genebre

Genebre 2026 butt-weld ball valve The Genebre 2026 is a three-piece, full-bore ball valve with butt-weld ends to ANSI B16.25. The valve body is stainless steel CF8M / AISI 316, with PTFE + 15% glass-filled seats and a Viton stem O-ring. Nominal rating is PN63 / 1000 WOG, with an operating temperature range of -25°C to +180°C, subject to pressure, medium...

View

Ball Valve welded ends - 3 pcs full bore ball valve socket weld ANSI B 16.11 - 2027 | Genebre

Genebre 2027 socket-weld ball valve The Genebre 2027 is a three-piece, full-bore ball valve with socket-weld ends to ANSI B16.11. The body is stainless steel CF8M / 316. Standard soft parts are PTFE + 15% glass fibre seats and seals with a Viton stem O-ring. Pressure rating is PN63 / 1000 WOG, with a temperature range of -25°C to +180°C, subject to...

View

Ball Valve welded ends - 3 pcs full bore ball valve socket weld ANSI B 16.11 - 2034S | Genebre

Genebre 2034S socket-weld ball valve The Genebre 2034S is a three-piece, full-port ball valve with socket-weld ends to ANSI/ASME B16.11. The body is carbon steel WCB, with stainless steel 316 ball and stem, PTFE + 15% glass-fibre seats, 1000 WOG pressure rating, and operating temperature range from -25°C to +180°C, subject to pressure-temperature derating...

View

Ball Valve threaded ends - 3 pcs full bore ball valve NPT thread - 2025N | Genebre

Genebre 2025N 3-piece NPT ball valve The Genebre 2025N is a three-piece, full-bore ball valve with NPT threaded ends. The body is CF8M / 316 stainless steel, with PTFE + 15% glass fibre seats, Viton stem O-ring, PN63 pressure rating and an operating temperature range of -25°C to +180°C, subject to media compatibility. Construction and operating data...

View

Ball Valve threaded ends - 3 pcs full bore ball valve - 2034 | Genebre

Genebre 2034 three-piece ball valve The Genebre 2034 is a three-piece, full-bore ball valve with threaded BSP connections to ISO 7-1 / EN 10226-1. The body is carbon steel WCB, with AISI 316 ball and stem, PTFE + 15% glass fibre seats, 1000 WOG pressure rating, and an operating temperature range of -25°C to +180°C. Typical applications industrial water...

View

Ball Valve threaded ends - 3 pcs full bore ball valve NPT thread - 2034N | Genebre