Industrial safety shower, freestanding, with hand-held eye shower with one spray head 45 - PremiumLine - BR 833 095 | B-Safety B
Industrial safety shower, freestanding, with hand-held eye shower with one spray head 45 - PremiumLine - BR 833 095 | B-Safety B

Industrial safety shower, freestanding, with hand-held eye shower with one spray head 45 - PremiumLine - BR 833 095 | B-Safety

B-Safety BR 833 095 PremiumLine

Floor-mounted emergency safety shower with manual single-head 45° eye/face wash. Designed for locations requiring full-body decontamination and targeted rinsing of eyes, face, or locally exposed areas. Installation requires a 1 ¼” female water supply, with both top and bottom inlets for integration into recirculating water lines.

Technical Data

  • PremiumLine construction: AISI 316 stainless steel, polished finish
  • Dimensions: 2300 x 200 x 630 mm
  • Base: Ø200 mm, 4 anchor holes
  • Body operating pressure: 1.5–3 bar dynamic
  • Body flow rate: 50 l/min
  • Eye wash flow rate: 7 l/min
  • Eye wash operating pressure: 1.5–5 bar
  • Hand-held hose: 1.5 m, stainless steel braided, ½” female inlet
  • Body activation: 700 mm pull rod
  • Eye wash activation: ergonomic handle, non-self-closing valve, adjustable

Materials and Operation

Body head, piping, ball valve, base, tees, and operating rod are AISI 316. Manual eye wash is Luran with wetted parts in DZR CW724R and head in POM/EPDM. The body head is self-draining to minimize stagnant water and scale formation.

Standards and Certifications

Complies with EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019, and ANSI Z358.1-2014. Also references EN 1717, DIN 1988, DIN-DVGW/DVGW NW-0416CL0425, NW-0417CL0263, and GOST-R.

Flow Rate Variants

  • BR 833 095: 50 l/min, hazard class I
  • BR 833 095 / 75L: 75 l/min / 20 GPM, hazard class II
  • BR 833 095 / 110L: 110 l/min, hazard class III

FAQ

When is the manual 45° head selected?
Used when rinsing must be directed by the user or maintenance operator, especially for localized chemical exposure.

What is checked during periodic inspection?
Flow rate, dynamic pressure, operation of non-self-closing valve, hose condition, head cleanliness, and ball valve tightness.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcificationand maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW Certification
TUV NORD ISO 9001

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • inclusive ClassicLine hand-held eye shower with one spray head 45°, for mounting on standpipe, position and orientation freely selectable
  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray head for large-scale dispersion of water, 45° angled, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism
  • integrated flow regulation 7 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • sturdy wall bracket with positioning of the shower, including mounting kit for mounting on the standpipe
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72