Industrial safety shower, freestanding, stainless steel, floor mounted, with eye shower - PremiumLine - BR 832 095 | B-Safety B-
Industrial safety shower, freestanding, stainless steel, floor mounted, with eye shower - PremiumLine - BR 832 095 | B-Safety B-

Industrial safety shower, freestanding, stainless steel, floor mounted, with eye shower - PremiumLine - BR 832 095 | B-Safety

B-Safety BR 832 095 PremiumLine

Freestanding emergency safety shower with integrated eye wash, designed for industrial environments with risk of personnel exposure to chemicals, corrosive liquids, or airborne particulates. Installation requires a permanent 1 ¼” female water supply and supports top/bottom inlet for integration into recirculating water networks.

Technical Specifications

  • Construction: AISI 316 stainless steel, polished finish
  • Height: 2300 mm, projection: 630 mm
  • Base: Ø200 mm with 4 anchor holes
  • Body operating pressure: 1.5–3 bar dynamic
  • Body flow rate: 50 l/min
  • Eye wash flow rate: 14 l/min at 1.5–5 bar
  • Body activation: 700 mm pull rod
  • Eye wash activation: 130 mm stainless PUSH plate, phosphorescent per DIN 67510

Materials and Eye Wash Arrangement

Shower head, piping, valves, base, and connection fittings are AISI 316. Eye wash features dual 45° spray heads, POM flow regulator, and EPDM-protected covers. Suitable for environments requiring high resistance to cleaning agents, humidity, or chemical atmospheres.

Standards and Certifications

Complies with EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019, and ANSI Z358.1-2014. Also references DIN-DVGW/DVGW, EN 1717, DIN 1988, and GOST-R.

Flow Rate Variants

  • BR 832 095: 50 l/min, hazard class I
  • BR 832 095 / 75L: 75 l/min / 20 GPM, hazard class II
  • BR 832 095 / 110L: 110 l/min, hazard class III

Applications

Chemical plants, laboratories, CIP areas, acid/alkali storage, water treatment, corrosive liquid production, and container filling stations.

FAQ

When is the PremiumLine version selected?
When full AISI 316 stainless construction and combined body/eye wash point are required.

What is checked during periodic inspection?
Flow rate, dynamic pressure, head drainage, valve tightness, nozzle cleanliness, and actuator accessibility.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcificationand maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • integrated PremiumLine safety eye shower with two spray heads 45°, mounting height 970 mm, orientation of eye shower freely selectable on site
  • connection pipe of stainless steel for easy installation and alignment of the shower, polished, water inlet ¾” male
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of stainless steel, polished, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • high-performance spray heads made of stainless steel for large-scale dispersion of water, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72