Αυτόνομο Ντους ασφαλείας οφθαλμών B-Safety με μία κεφαλή ψεκασμού 45° χειρός τύπος ClassicLine BR 833 085 - B-Safety
Αυτόνομο Ντους ασφαλείας οφθαλμών B-Safety με μία κεφαλή ψεκασμού 45° χειρός τύπος ClassicLine BR 833 085 - B-Safety

Αυτόνομο Ντους ασφαλείας οφθαλμών B-Safety με μία κεφαλή ψεκασμού 45° χειρός τύπος ClassicLine BR 833 085

B-Safety BR 833 085 ClassicLine

Δαπέδου ντους ασφαλείας σώματος με χειροκίνητο ντους οφθαλμών μίας κεφαλής 45°. Χρησιμοποιείται σε θέσεις όπου απαιτείται έκπλυση σώματος και δυνατότητα κατευθυνόμενης έκπλυσης οφθαλμών ή προσώπου, π.χ. κοντά σε χημικά δοχεία, σημεία πλήρωσης, εργαστηριακούς πάγκους και περιοχές ανάμιξης. Απαιτεί σύνδεση σε δίκτυο νερού 1 ¼” θηλυκό, με άνω και κάτω είσοδο για γραμμές κυκλοφορίας.

Τεχνικά χαρακτηριστικά

  • Ύψος: 2300 mm
  • Προβολή βραχίονα: 630 mm
  • Βάση: Ø200 mm με 4 οπές αγκύρωσης
  • Πίεση λειτουργίας σώματος: 1,5–3 bar δυναμική πίεση
  • Παροχή σώματος: 50 l/min
  • Παροχή ντους οφθαλμών: 7 l/min
  • Πίεση λειτουργίας οφθαλμών: 1,5–5 bar
  • Εύκαμπτος σωλήνας χειρός: 1,5 m, σύνδεση ½” θηλυκή
  • Ενεργοποίηση σώματος: ράβδος έλξης 700 mm
  • Ενεργοποίηση οφθαλμών: χειρολαβή με ρυθμιζόμενη ενεργοποίηση, μη αυτοκλειόμενη βαλβίδα

Υλικά κατασκευής

Η σωλήνωση είναι ανοξείδωτη AISI 304 με πράσινη χημικά ανθεκτική βαφή πούδρας. Η σφαιρική βάνα είναι DZR brass CW724R. Τα ταφ, μούφες και πώματα είναι AISI 316. Η κεφαλή σώματος και οι ρυθμιστές ροής είναι POM. Το χειροκίνητο ντους οφθαλμών είναι από Luran, με μέρη σε επαφή με το νερό από DZR CW724R και κεφαλή POM/EPDM.

Πρότυπα και εγκρίσεις

Συμμόρφωση με EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019 και ANSI Z358.1-2014. Αναφέρονται επίσης DIN-DVGW/DVGW, EN 1717, DIN 1988 και GOST-R.

Εκδόσεις παροχής

  • BR 833 085: 50 l/min, hazard class I
  • BR 833 085 / 75L: 75 l/min / 20 GPM, hazard class II
  • BR 833 085 / 110L: 110 l/min, hazard class III

FAQ

Πότε επιλέγεται η χειροκίνητη κεφαλή 45°;
Όταν χρειάζεται κατευθυνόμενη έκπλυση, π.χ. σε πρόσωπο, λαιμό ή τοπική επιμόλυνση, αντί για σταθερή λεκάνη οφθαλμών.

Τι ελέγχεται στη συντήρηση;
Παροχή, δυναμική πίεση, στεγανότητα βανών, κατάσταση εύκαμπτου σωλήνα, καθαρότητα κεφαλής, καλύμματα σκόνης και ελεύθερη πρόσβαση στη ράβδο έλξης.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the ClassicLine series are made of high-quality materials and are just as suitable for use in laboratories and research as they are for rough use in industry. B-SAFETY’s green chemical-resistant polyester powder coating has proven itself in many aggressive environments and is resistant to many acids and alkalis.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification-and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, chemical resistant green powder coated, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, chemical resistant green powder coated, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” made of dezincification-resistant brass, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • inclusive ClassicLine hand-held eye shower with one spray head 45°, for mounting on standpipe, position and orientation freely selectable
  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray head for large-scale dispersion of water, 45° angled, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism
  • integrated flow regulation 7 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • sturdy wall bracket with positioning of the shower, including mounting kit for mounting on the standpipe
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW    ISO9001_D_72