2-Way

4G Ghidini 6060 Ball Valve The 6060 type is a 2-way 4G Ghidini ball valve used for flow isolation in industrial piping systems. It belongs to the stainless-steel 2-way ball valve range and is typically applied in food, chemical, pharmaceutical, process water and utility services. Engineering Function The valve is intended for on/off duty, not for...

View

Ball Valve 6062 Series | 4G Ghidini

Ghidini 6062 4G Spherical Ball Valve Type 6062 is a two-way MIGNON ball valve for small pipe sizes, manufactured with an AISI 316L / 1.4404 stainless steel body and ISO 228-1 threaded connections. It is used for flow isolation in auxiliary systems, low-flow process lines and compact skid assemblies. Technical Characteristics Nominal sizes: 1/4” to 1/2”...

View

Ball Valve 6160 Series | 4G Ghidini

Ghidini 6160 4G MIGNON Ball Valve Two-way MIGNON ball valve for small isolation lines, manufactured with AISI 316L / 1.4404 stainless steel body and ISO 228-1 threaded connections. The valve is intended for on/off service in auxiliary circuits, sampling lines and low-flow process services. Technical characteristics Sizes: 1/4” to 1/2” Pressure rating:...

View

Ball Valve 6162 Series | 4G Ghidini

Spherical Ball Valve 4G Ghidini 6162 Two-way MIGNON ball valve with vent connection for small bore lines from 1/4” to 1/2”. The body is AISI 316L / 1.4404 stainless steel, with ISO 228-1 threaded ends and Virgin PTFE seats. Technical Characteristics Pressure class: PN40 Temperature range: -20°C to +160°C Port configuration: full bore or reduced bore,...

View

Cast Iron Ball Valve - Euro-Sfer Series | Valpres

Valpres S.R.L.

Valpres Euro-Sfer Cast Iron Flanged Ball Valve The Valpres Euro-Sfer is a DIN flanged ball valve for flow isolation in PN6 and PN16 pipework. It is intended for on/off service in low and medium pressure utility systems where a cast iron body is acceptable. The body material is EN-GJL-250. Depending on the version, the connection end is ASTM A105, the ball...

View

Ball Valve threaded ends - 1 pc reduced bore ball valve - 2001 | Genebre

Genebre 2001 one-piece ball valve The Genebre 2001 is a reduced-bore, one-piece ball valve for manual isolation of small process and utility lines. The body is polished AISI 316 / 1.4408 stainless steel, with PTFE seats and BSP gas threads according to ISO 7-1 / EN 10226-1. Operating conditions Nominal pressure: PN63, subject to pressure-temperature...

View

Ball Valve threaded ends - 1 pc reduced bore ball valve NPT thread - 2002 | Genebre

Genebre 2002 NPT Ball Valve The Genebre 2002 is a one-piece, reduced-bore ball valve with female NPT ANSI B2.1 threaded ends. The body is stainless steel CF8M / 316, with PTFE seats, nominal pressure PN63, and a temperature range of -25°C to +180°C. Valve Construction and Selection Logic The one-piece body reduces external leak paths compared with...

View

Ball Valve threaded ends - 1 pc reduced bore ball valve - 2004 | Genebre

Genebre 2004 BSP Stainless Steel Ball Valve The Genebre 2004 is a one-piece, reduced-bore ball valve with female Gas threads to ISO 7-1 / EN 10226-1. The body material is CF8M / AISI 316 stainless steel, with PTFE seats, PN63 pressure rating, and an operating temperature range of -25°C to +180°C, subject to pressure-temperature derating and media...

View

Ball Valve threaded ends - 1 pc reduced bore ball valve M-F - 2005 | Genebre

Genebre 2005 M-F Ball Valve The Genebre 2005 is a one-piece, reduced-bore ball valve with male-female threaded ends to Gas ISO 7-1 / EN 10226-1. The body is polished stainless steel AISI 316 / 1.4408, with PTFE seats, pressure rating PN63, and operating temperature range from -25°C to +180°C, subject to the pressure-temperature limits of the seat...

View

Ball Valve threaded ends - 1 pc reduced bore ball valve F-F - 2006 | Genebre

Genebre 2006 F-F stainless steel ball valve The Genebre 2006 is a one-piece reduced-bore ball valve with female threaded ends F-F Gas ISO 7-1 / EN 10226-1. The body is polished AISI 316 stainless steel, with PTFE seats, pressure rating PN63, and operating temperature range -25°C to +180°C, subject to pressure-temperature derating and media compatibility....

View

Ball Valve threaded ends - High Pressure full bore ball valve - 2007 | Genebre

Genebre 2007 high-pressure ball valve The Genebre 2007 is a one-piece, full-bore, manually operated ball valve for isolation service in high-pressure lines. The body material is carbon steel ASTM A105, with stainless steel 304 ball and stem, PEEK seats, BSP threaded ends, Class 1500 / 255 bar pressure rating, and an operating temperature range of -30°C to...

View

Ball Valve threaded ends - High Pressure full bore ball valve NPT thread - 2007N | Genebre

Genebre 2007N high-pressure NPT ball valve The Genebre 2007N is a one-piece, full-bore ball valve with female NPT threads to ANSI/ASME B1.20.1. The body is ASTM A105 carbon steel, with AISI 304 stainless steel ball and stem and PEEK seats. Nominal pressure rating: Class 1500 / 255 bar. Temperature range: -30°C to +250°C, subject to pressure-temperature...

View

Ball Valve welded ends - 1 pc reduce bore ball valve - District heating - 2035 | Genebre

Genebre 2035 for District Heating Networks Genebre 2035 is a one-piece welded ball valve with reduced bore construction for district heating and hot water service. The body is carbon steel, with welded ends for permanent installation on steel pipework. Operating Conditions Pressure class: PN25 Temperature range: up to +200°C Function: isolation, on/off...

View

Ball Valve - Conventional Power Plant | Neway

Neway

Neway Ball Valve for Conventional Power Plant Service Neway ball valves are specified for isolation duties in conventional power plants where pressure, temperature, shutoff requirement, and cycling frequency must be checked against the project datasheet. Typical size range is DN15–DN600 / 1/2"–24", with pressure ratings ASME Class 150–4500 / PN16–PN760....

View

Ball Valve PN16 - Type 150 | ICP

PN16 ICP Type 150 flanged ball valve Two-piece, full-bore flanged ball valve for industrial isolation duties. The valve uses a split-body construction with a floating ball and is supplied in sizes DN15 to DN200. It is intended primarily for on/off service, not for continuous throttling or control-loop modulation. Construction and materials Body and body...

View

Ball Valve PN16/40 - Type 154/156 | ICP

Spherical Ball Valve PN16/40 Type 154/156 Type 154/156 is a two-piece, full-bore flanged ball valve for on/off isolation in industrial piping systems. The full-bore design limits pressure drop and is suitable where line capacity must not be significantly restricted. The valve is supplied with DIN flanged connections. Pressure classes are PN40 for...

View

Ball Valve PN16/40 - Type 254/256 | ICP

PN63 Full Bore Ball Valve for Gas Networks Type 2001 IMF-S/SN Type 2001 IMF-S/SN is a full bore isolation ball valve for natural gas, LPG and industrial gas services. It is selected where PN63 pressure rating, low pressure drop and controlled seat/stem leakage are required in distribution, transfer or process gas lines. Construction and Materials Forged...

View

Ball valve PN63 (Gas) - Type 2001-IMF/S/SN

PN63 Ball Valve for Gas Service Type 2001-IMF/S/SN Type 2001-IMF/S/SN is a two-piece, full-bore ball valve for isolation duties in industrial gas pipework. It is supplied with BSP or NPT threaded ends and a nominal pressure rating of PN63 / 1000 WOG, subject to the applicable pressure-temperature curve. Technical Data Valve type: two-piece floating ball...

View

Ball Valve Class 150/300 - Type 315/330/415/430 | ICP

IPC Class 150/300 Full-Bore Ball Valve Types 315/330/415/430 Two-piece full-bore flanged ball valve for on/off isolation in industrial liquid and gas services. The valve is supplied with ANSI flanged ends, pressure classes 150 lb and 300 lb, in sizes from 1/2 in to 8 in. Construction and Materials Body materials: ASTM A216 WCB for carbon steel piping...

View

Ball Valve PN16/40 - Type 316/340 | JC

JC Ball Valve Type 316/340 PN16/40 Two-piece, full-bore flanged ball valve for on/off isolation in liquid and gas services. The valve is available in PN 16 and PN 40 pressure classes, with DIN flanged ends, PTFE seats, and body materials 1.0619 carbon steel or 1.4408 stainless steel. Construction Split body, full-bore design for low pressure drop...

View

Ball Valve Class 150/300 - Type 515/530 FB | JC

JC Type 515/530 FB Class 150/300 Flanged Full Bore Ball Valve Two-piece full-bore ball valve with ANSI flanged ends for positive isolation in industrial liquid and gas lines. Available in ASME Class 150 and Class 300, with ASTM A216 WCB, ASTM A351 CF8M or ASTM A352 LCC body materials and PTFE seats. Construction Split-body construction, full-bore flow...

View

Ball Valve PN16/40 - Type 516/540 | JC

Spherical Ball Valve JC Type 516/540 PN16/40 Two-piece, full-bore flanged ball valve for on/off isolation in industrial liquid, gas and steam services. The valve is supplied in PN 16 or PN 40 pressure classes, with body material 1.0619 carbon steel or 1.4408 stainless steel and PTFE seats. Construction Split-body design with full-bore flow passage DIN...

View

Ball Valve PN16/40 - Type 516Q/540Q/316Q/340Q | JC