Actuated on/off valve type 5060 | Genebre

Name: Actuated on/off valve type 5060 | Genebre
Brand: Genebre
SKU: Actuated on/off valve type 5060 | Genebre

Automatic On/Off Valve Genebre Type 5060

The Genebre 5060 is a pneumatically actuated angle seat valve with a single-acting actuator and spring return. The default configuration is Normal Closed (NC), meaning the valve closes upon loss of control air. It is designed for on/off isolation rather than modulating flow control.

Technical Specifications

DN15–DN50, connections from 1/2" to 2".
PN16, maximum operating pressure of 16 bar.
Body made of stainless steel 1.4408 / CF8M.
Seat material: PTFE.
Threads according to ISO 228/1, with NPT version available as 5060N.
Operating temperature: -10°C to +180°C.
Maximum fluid viscosity: 600 mm²/s.

Hydraulic Selection

Kv values range from 4.7 m³/h at DN15 to 52.8 m³/h at DN50. For DN15–DN40, differential pressure is up to 16 bar, while DN50 has a maximum ΔP of 9 bar. Selection should consider DN, Kv, ΔP, and available air pressure, not just thread size.

Pneumatic Actuator

The actuator operates with control air pressure of 3–8 bar. Air inlet is G 1/8", requiring clean and dry air. Minimum control pressure increases with size and ΔP, from approximately 3.5 bar at DN15 to 7 bar at DN50.

Applications

Suitable for process water, air, neutral liquids, and compatible gases, provided chemical compatibility with stainless steel 1.4408 and PTFE is ensured. Typical uses include skids, auxiliary networks, filling/draining lines, bypasses, and automation with frequent cycling.

Installation and Maintenance

Flow direction should follow the arrow on the body. Horizontal installation with the actuator upwards is recommended, along with pipe alignment and a filter before the valve. Leakage from the side indicator hole suggests potential shaft seal failure, requiring gasket set replacement.

Standard (Options)

Connection (Options)

Material (Options)

1.4408

Pressure Rating (Options)

PN 16

Pattern (Options)

Angle

Seat (Options)

PTFE

Datasheet and documents

Description

Also available in NPT thread ISO 228-1 (5060N).

Gas threaded ends, PN-16. Constr.: stainless steel AISI 316 investment casting. Actuator seal: NBR. Working temp. range: -10ºC +180ºC. Pressure control actuator: 3-10 kg/cm2.

Reference: 5060

Reference	Size	Minimum purchase unit	Weight (Kg)	Box / carton
5060 04	SLANTED SEAT VALVE 1/2" + SPRING RETURN ACTUATOR	1	0.973	1/13
5060 05	SLANTED SEAT VALVE 3/4" + SPRING RETURN ACTUATOR	1	1.078	1/13
5060 06	SLANTED SEAT VALVE 1" +SPRING RETURN ACTUATOR	1	1.32	1/12
5060 07	SLANTED SEAT VALVE 1 1/4" +SPRING RETURN ACTUATOR	1	2.359	1/8
5060 08	SLANTED SEAT VALVE 1 1/2" +SPRING RETURN ACTUATOR	1	2.573	1/8
5060 09	SLANTED SEAT VALVE 2" +SPRING RETURN ACTUATOR	1	3.384	1/6

Certificates

GENEBRE, S.A. has implemented a quality management system to control the designing and manufacturing of fluid control valves, as well as the distribution of home and public taps.

This system complies with the requirements of the current international UNE-EN-ISO 9001:2015, certified by the prestigious German certification organization TÜV Rheinland.

In 2000, GENEBRE began to comply with the European Business Excellence Model, more commonly known as the EFQM. As a result, in 2003, the Catalan Regional Government awarded us with the Quality Award. This new system enables us to ensure the quality of GENEBRE's products and also to offer added value to our clients.

In 2012, we obtained the certification for the Environmental Management System. This system is certified according to the UNE-EN-ISO 14001:2015, also by TÜV Rheinland. GENEBRE QUALITY AND ENVIRONMENTAL POLICY

	AENOR - Homologación y Marcado N de AENOR para la línea de válvulas de gas.
	OLIVER RODÉS Water Quality - Certificados de agua potable, confirmando el cumplimiento de los criterios sanitarios de la calidad del agua para el conusmo humano RD 140/2003 de 07 de febrero (legislación española) y Directiva (UE) 2020/2184 del Parlamento Europeo y del Consejo de 16 de diciembre de 2020, relativa a la calidad de las aguas destinadas al consumo humano por el Laboratorio Oliver Rodés.
	HOMOLOGACIÓN CE - Homologación CE y otras específicas para mercados como Bielorrusia, Chile, Polonia, Rusia, Ucrania, Singapur y Arabia Saudí.
	NORMA UNE-EN-ISO 9001 - Este sistema está certificado de acuerdo a la norma UNE-EN-ISO 9001: 2015, por parte del prestigioso organismo certificador alemán TÜV Rheinland..