Safety Valves & Rupture Discs

Safety Valves UNI/ANSI Flanged - G15-CF / G15-CC | Nuova

Nuova G15-CF / G15-CC Safety Valves UNI / ANSI The Nuova G15-CF and G15-CC are flanged spring-loaded safety valves designed for overpressure protection of vessels, pipelines, and small process units. The discharge orifice is 15 mm (area: 176.71 mm²), providing higher flow capacity than G10 and G14 series valves. Technical Specifications Body PN: 25 Set...

View

Safety Valves UNI/ANSI Flanged - G20-CF / G20-CC | Nuova

Nuova General Instruments

Nuova G20-CF / G20-CC Safety Valves UNI / ANSI The Nuova G20-CF / G20-CC are flanged spring-loaded safety valves designed for steam, air, inert gases, and process liquids. The discharge orifice is 20 mm (area 314 mm²), providing higher flow capacity compared to G10, G14, and G15 models. Technical Data PN: 60 Set Pressure: 0.3–60 bar (CE / UKCA / EAC /...

View

Safety Valves UNI/ANSI Flanged - G25-CF / G25-CC | Nuova

Nuova General Instruments

Nuova G25-CF / G25-CC Safety Valves UNI / ANSI The Nuova G25-CF / G25-CC are flanged spring-loaded safety valves designed for overpressure protection of vessels, manifolds, and process lines. The discharge orifice is 25 mm (area 490.63 mm²), supporting higher flow rates compared to G20 series valves. Technical Data PN: 60 Set Pressure: 0.3–60 bar (CE /...

View

Safety Valves UNI/ANSI Flanged - G32-CF / G32-CC | Nuova

Nuova General Instruments

Nuova G32-CF / G32-CC Safety Valves UNI / ANSI The Nuova G32-CF / G32-CC are flanged spring-loaded safety valves designed for overpressure protection of vessels, manifolds, and piping systems. The discharge orifice is 32 mm (area 803.84 mm²), supporting higher flow rates than G20 and G25 series. Technical Data PN: 40 Set Pressure: 0.3–14 bar for CE /...

View

Safety Valves UNI/ANSI Flanged - G40-CF / G40-CC | Nuova

Nuova General Instruments

Nuova G40-CF / G40-CC Safety Valves UNI / ANSI The Nuova G40-CF / G40-CC are flanged spring-loaded safety valves designed for overpressure protection of vessels, manifolds, and process lines. The discharge orifice is 40 mm (area 1256 mm²), supporting higher flow rates than the G32 series. Technical Data PN: 40 Set Pressure: 0.3–14 bar for CE / UKCA / EAC...

View

Safety Valves UNI/ANSI Flanged - B38/L-CF / B38/L-CC | Nuova

Nuova General Instruments

Nuova B38/L-CF / B38/L-CC Safety Valves UNI / ANSI The Nuova B38/L-CF and B38/L-CC are flanged spring-loaded safety valves with test-lift lever, designed for overpressure protection of vessels, piping, and process equipment. Discharge orifice is 38 mm (area 1133.54 mm²). Technical Specifications PN: 40 Set pressure: 0.3–30 bar for CE / UKCA / EAC / ATEX,...

View

Safety Valves API526 Flanged - G10-API | Nuova

Nuova General Instruments

Nuova G10-API Safety Valve API 526 The Nuova G10-API is a flanged, spring-loaded safety valve designed in accordance with API 526 for low-capacity relief applications. The orifice is 10 mm (area 78.50 mm²), corresponding to API code 1D2 / orifice D. Typical applications include pressure vessels, small receivers, steam, air, inert gases, and process...

View

Safety Valves API526 Flanged - G14-API | Nuova

Nuova General Instruments

Nuova G14-API Safety Valve API 526 The Nuova G14-API is a flanged, spring-loaded safety valve designed according to API 526 requirements. It is intended for overpressure protection of pressure vessels, headers, steam lines, air, inert gases, and process liquids. The technical datasheet designates it as G14-API, with a 13.5 mm orifice, 143.07 mm² discharge...

View

Safety Valves API526 Flanged - G20-API | Nuova

Nuova General Instruments

Nuova G20-API Safety Valve API 526 The Nuova G20-API is a flanged, spring-loaded safety valve designed according to API 526 for overpressure protection in steam, air, inert gases, and process liquids. The discharge orifice is 20 mm (area 314 mm²), corresponding to API code 1½G3 / orifice G. Technical Data PN: 60 Set Pressure (CE / UKCA / EAC / ATEX):...

View

Safety Valves API526 Flanged - G25-API | Nuova

Nuova General Instruments

Nuova G25-API Safety Valve API 526 The Nuova G25-API is a flanged, spring-loaded safety valve designed in accordance with API 526 requirements. It is intended for overpressure protection of pressure vessels, steam headers, air receivers, neutral gas lines, and process liquid systems. The valve features a 25 mm orifice (490.63 mm² discharge area),...

View

Safety Valves API526 Flanged - G32-API | Nuova

Nuova General Instruments

Nuova G32-API Safety Valve API 526 The Nuova G32-API is a flanged, spring-loaded safety valve designed to API 526 rating, suitable for overpressure protection of pressure vessels, headers, and process lines. The discharge orifice is 32 mm (area 803.84 mm²), corresponding to orifice J and API code 2J3. Technical Data PN: 40 Set pressure CE / UKCA / EAC /...

View

Safety Valves API526 Flanged - G40-API | Nuova

Nuova General Instruments

Nuova G40-API Safety Valve API 526 The Nuova G40-API is a flanged, spring-loaded safety valve designed according to API 526 for overpressure protection of pressure vessels, headers, and process lines. The discharge orifice is 40 mm (area 1256 mm²), corresponding to API code 3K4 / orifice K. Technical Data PN: 40 Set pressure (CE / UKCA / EAC / ATEX):...

View

Safety Valves PVC - PVC10 | Nuova

Nuova General Instruments

Nuova PVC10 Safety Valve – PVC Construction The Nuova PVC10 is a spring-loaded safety valve constructed from PVC, designed for low and medium pressure applications requiring chemical compatibility with non-metallic materials. The discharge orifice is 10 mm (area: 78.50 mm²), suitable for process lines where metallic valves are unsuitable due to corrosion...

View

Safety Valves PVC - PVC14 | Nuova

Nuova General Instruments

Nuova PVC14 Safety Valve – PVC Construction The Nuova PVC14 is a spring-loaded safety valve constructed from PVC, designed for systems where chemical compatibility of the plastic body is a primary selection criterion. The discharge orifice is 14 mm (area: 153.86 mm²), providing higher relief capacity compared to the PVC10 variant. Technical Data Body...

View

Safety valve - SP 80 N | Berluto

Berluto

Berluto SP 80 N Pressure Relief Valve Berluto SP 80 N is an angle-type, direct-acting spring-loaded pressure relief/overflow valve. It is designed for the protection of pumps, bypass circuits, and small process networks against overpressure above the setpoint. Operation is proportional and does not require external actuation. Technical Specifications...

View

Safety valve - SP 80 T | Berluto

Berluto

Berluto SP 80 T Pressure Relief Valve Berluto SP 80 T is an angle-type, direct-acting, spring-loaded pressure relief/overflow valve. Designed for pump protection, bypass lines, and overpressure control in liquid, gas, and steam networks. Operation is proportional, without pneumatic or electric actuators. Technical Specifications Type: angle, adjustable,...

View

Safety valve - SP 85 | Berluto

Berluto

Berluto SP 85 Stainless Steel Pressure Relief Valve The Berluto SP 85 is an angle-type, direct-acting, spring-loaded pressure relief valve. It is designed for use in pump bypass lines, return lines, and auxiliary circuits where proportional pressure relief to a vessel or lower-pressure line is required. Suitable for steam, gases, and liquids in industrial...

View

Safety Valves & Pressure relief Valves - 2252 | Genebre

Genebre

Genebre 2252 Stainless Steel Safety Valve The Genebre 2252 is an angle-type, threaded safety valve constructed from stainless steel, designed for overpressure protection in gas or steam lines. It is not intended for continuous bypass regulation but for pressure relief when the set pressure is reached. Technical Specifications Connections: BSP Gas,...

View

Safety Valves & Pressure relief Valves ASME - 2252N | Genebre

Genebre

Genebre 2252N Safety Valve NPT The Genebre 2252N is an angle-pattern, threaded safety valve constructed from stainless steel, designed for gas or steam service. The 2252N variant differs from the 2252 primarily in connection type: ends are NPT per ASME B1.20.1 rather than BSP. Design, calculation, and testing conform to EN 12516 and EN ISO 4126-1/7....

View

Safety Valves & Pressure relief Valves - 2253 | Genebre

Genebre

Genebre 2253 Safety Valve with Lever The Genebre 2253 is an angle-type spring-loaded safety valve constructed from stainless steel, featuring threaded connections and a manual lift lever. Designed for gas or steam service; not intended for continuous bypass regulation. Set pressure is factory-adjusted and sealed. Technical Specifications Connection: BSP...

View

Safety Valves & Pressure relief Valves ASME - 2253N | Genebre

Genebre

Genebre 2253N Safety Valve NPT with Lever The Genebre 2253N is a stainless steel, angle-type spring-loaded safety valve with NPT threads per ASME B1.20.1 and a manual lift lever. Designed for gas or steam service, it enables local overpressure relief and periodic functional testing without disassembly. Technical Specifications Connections: 1/2" x 1" up...

View

Safety Valves & Pressure relief Valves - 2256 | Genebre

Genebre

Genebre 2256 Flanged Inlet Safety Valve The Genebre 2256 is a spring-loaded safety valve constructed from stainless steel, designed for gas or steam service. Unlike threaded variants, this model features a flanged PN16/40 inlet per EN 1092-1 and a BSP threaded outlet per ISO 228/1. Technical Specifications Type: angle pattern, direct-acting safety valve...

View

Safety Valves & Pressure relief Valves - 2257 | Genebre

Genebre

Genebre 2257 Safety Valve with Flanged Inlet and Lever The Genebre 2257 is a stainless steel spring-loaded safety valve designed for gas and steam service. Inlet connection is flanged PN16/40 per EN 1092-1; outlet is threaded BSP Gas per ISO 228/1. The lever allows manual lift for periodic functional testing. Technical Specifications Type: angle pattern,...

View

Safety Valves & Pressure relief Valves - 2259 | Genebre

Genebre

Genebre 2259 Pressure Relief Valve The Genebre 2259 is an angle-type pressure relief valve constructed from stainless steel, featuring a flanged inlet PN16/40 and a BSP threaded outlet. Designed for overpressure discharge in water, compressed air, and saturated steam systems, selection is based on required discharge flow and set pressure parameters....

View

Showing 49-72 of 108 item(s)

Safety Valves & Rupture Discs

Safety Valves UNI/ANSI Flanged - G15-CF / G15-CC | Nuova

Safety Valves UNI/ANSI Flanged - G20-CF / G20-CC | Nuova

Safety Valves UNI/ANSI Flanged - G25-CF / G25-CC | Nuova

Safety Valves UNI/ANSI Flanged - G32-CF / G32-CC | Nuova

Safety Valves UNI/ANSI Flanged - G40-CF / G40-CC | Nuova

Safety Valves UNI/ANSI Flanged - B38/L-CF / B38/L-CC | Nuova

Safety Valves API526 Flanged - G10-API | Nuova

Safety Valves API526 Flanged - G14-API | Nuova

Safety Valves API526 Flanged - G20-API | Nuova

Safety Valves API526 Flanged - G25-API | Nuova

Safety Valves API526 Flanged - G32-API | Nuova

Safety Valves API526 Flanged - G40-API | Nuova

Safety Valves PVC - PVC10 | Nuova

Safety Valves PVC - PVC14 | Nuova

Safety valve - SP 80 N | Berluto

Safety valve - SP 80 T | Berluto

Safety valve - SP 85 | Berluto

Safety Valves & Pressure relief Valves - 2252 | Genebre

Safety Valves & Pressure relief Valves ASME - 2252N | Genebre

Safety Valves & Pressure relief Valves - 2253 | Genebre

Safety Valves & Pressure relief Valves ASME - 2253N | Genebre

Safety Valves & Pressure relief Valves - 2256 | Genebre

Safety Valves & Pressure relief Valves - 2257 | Genebre

Safety Valves & Pressure relief Valves - 2259 | Genebre

Safety Valves & Rupture Discs

Athens Department

Thessaloniki Department