Emergency shower with eye/face wash unit with bowl and lid - PremiumLine - BR 868 095 | B-Safety B-Safety - 1
Emergency shower with eye/face wash unit with bowl and lid - PremiumLine - BR 868 095 | B-Safety B-Safety - 1

Emergency shower with eye/face wash unit with bowl and lid - PremiumLine - BR 868 095 | B-Safety

B-Safety BR 868 095 PremiumLine

Wall-mounted safety shower and eye/face wash combination unit with integrated bowl and lid. Designed for installation in laboratories, cleanrooms, chemical storage areas, and container filling stations where a consolidated emergency decontamination point is required without occupying floor space.

Technical Data

  • Type: PremiumLine, wall-mounted configuration
  • Main piping material: stainless steel, polished finish
  • Overall height: 1625 mm
  • Arm projection: 630 mm
  • Eye/face wash installation height: 810 mm ±100 mm
  • Water inlet: ¾” female, top/bottom connection for circulation line
  • Operating pressure: 1.5–3 bar dynamic
  • Body flow rate: 50 l/min, optional 75 or 110 l/min versions
  • Bowl outlet: 1 ½” male

Construction and Operation

The body shower is equipped with a stainless steel ¾” ball valve featuring a quick-connect system, actuated via a 700 mm pull rod. The spray head is stainless steel, self-draining, with integrated flow control set at 50 l/min for 1.5–3 bar pressure range.

Eye/Face Wash Unit

The unit comprises an ABS body, bowl, and UV/impact-resistant lid. The lid serves as both dust protection and actuation lever; flow initiates upon lowering. Includes 3/8” valve, chrome-plated brass aerators, and 3/8” flow control valve for spray height and flow adjustment.

Standards and Certifications

Complies with ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019. Also references DIN 1988, EN 1717, BGI/GUV-I 850-0, DIN-DVGW/DVGW, and GOST-R.

Maintenance

Periodic inspection of flow rate, dynamic pressure, valve tightness, aerator cleanliness, lid actuation, bowl condition, and unobstructed 1 ½” drainage is required.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 1625 mm
  • Projection: 630 mm
  • Installation height: 810 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • two connection pipes ¾“ of stainless steel, polished, total length 1500 mm
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • integrated PremiumLine eye-/face wash unit with bowl and lid, wall mounted
  • housing, lid and bowl made of UV and impact resistant ABS plastics, water outlet 1 ½“ male
  • integrated protective cover against dust
  • actuation by pulling down the lid
  • ball valve 3/8“ of brass, with lever actuation by lid, DIN-DVGW tested and certificated
  • aerators made of brass with a very limited spray pattern, chrome-plated
  • with integrated flow regulation valve 3/8” for setting the desired spray height and flow rate, water inlet 3/8” male
  • inclusive sign for eye shower according to EN ISO 7010 und ASR A1.3 on the lid, dimensions 170 x 170 mm, viewing distance 17 metre
  • mounting height 810 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72