Emergency shower stainless steel, wall mounted, with safety eye shower - PremiumLine - BR 861 095 | B-Safety B-Safety - 1
Emergency shower stainless steel, wall mounted, with safety eye shower - PremiumLine - BR 861 095 | B-Safety B-Safety - 1

Emergency shower stainless steel, wall mounted, with safety eye shower - PremiumLine - BR 861 095 | B-Safety

B-Safety BR 861 095 PremiumLine

Wall-mounted emergency combination shower for body and eye wash, designed for locations requiring decontamination of skin and eyes using standard water supply lines. The PremiumLine construction utilizes polished stainless steel, suitable for laboratories, cleanrooms, chemical processing units, and industrial environments with elevated hygiene and cleaning requirements.

Technical Specifications

  • Type: Wall-mounted body/eye wash combination
  • Overall height: 1625 mm
  • Arm projection: 630 mm
  • Eye wash installation height: 810 mm ±100 mm
  • Water inlet: ¾” female, top/bottom connection for circulation line
  • Body shower operating pressure: 1.5–3 bar dynamic
  • Body flow rate: 50 l/min, optional 75 or 110 l/min versions
  • Eye wash flow rate: 14 l/min, pressure range 2–5 bar

Construction and Operation

Piping, wall flanges, arm, ¾” ball valve, pull rod, and shower head are stainless steel. Body shower is actuated via a 700 mm pull rod. The spray head is self-draining and incorporates an integrated flow regulator (50 l/min) for consistent spray pattern within the specified pressure range.

Eye Wash Unit

PremiumLine eye wash features two 45° heads, stainless steel ½” valve, and 130 mm PUSH plate with phosphorescent indicator (DIN 67510). Heads include plastic dispersion plates, elastomeric protectors, and sealed dust covers with flip mechanism.

Standards and Applications

Complies with EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019, ANSI Z358.1-2014. Also references DIN 1988, EN 1717, BGI/GUV-I 850-0, DIN-DVGW/DVGW, and GOST-R. Suitable for water, not recommended for aggressive or contaminated media.

Maintenance

Periodic inspection of flow rates, dynamic pressure, valve tightness, head cleanliness, dust covers, PUSH operation, pull rod function, and wall flange stability is required for reliable operation.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 1625 mm
  • Projection: 630 mm
  • Installation height: 810 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • two connection pipes ¾“ of stainless steel, polished, total length 1500 mm
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • integrated PremiumLine safety eye shower with two spray heads 45°
  • connection pipe of stainless steel for easy installation and alignment of the shower, polished, water inlet ¾” male
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of stainless steel, polished, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 2 to 5 bar flow pressure
  • high-performance spray heads made of stainless steel for large-scale dispersion of water, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • mounting height 810 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72