Safety eye shower with two spray heads 45° - PremiumLine - BR 210 095 | B-Safety B-Safety - 1
Safety eye shower with two spray heads 45° - PremiumLine - BR 210 095 | B-Safety B-Safety - 2
Safety eye shower with two spray heads 45° - PremiumLine - BR 210 095 | B-Safety B-Safety - 3
Safety eye shower with two spray heads 45° - PremiumLine - BR 210 095 | B-Safety B-Safety - 1
Safety eye shower with two spray heads 45° - PremiumLine - BR 210 095 | B-Safety B-Safety - 2
Safety eye shower with two spray heads 45° - PremiumLine - BR 210 095 | B-Safety B-Safety - 3

Safety eye shower with two spray heads 45° - PremiumLine - BR 210 095 | B-Safety

B-Safety PremiumLine BR 210 095 – Fixed 45° Eyewash Station

The BR 210 095 is a wall-mounted emergency eyewash unit equipped with two 45° spray heads constructed from stainless steel. Designed for fixed installation in industrial and laboratory environments, the dual-head configuration enables simultaneous irrigation of both eyes with controlled water dispersion.

Technical Specifications

  • Flow rate: 14 l/min
  • Operating pressure: 1.5–5 bar
  • Water connection: ¾” male
  • Dimensions: 180 × 230 mm
  • Wall projection: 300 mm
  • Mounting height: 900 mm ±200 mm
  • Material: stainless steel
  • Surface finish: polished

Operation and Construction

Activation is via a ½” stainless steel ball valve with a 130 mm PUSH lever. Integrated flow regulator limits supply to 14 l/min, maintaining spray pattern within specified pressure range. Spray heads are angled at 45°, feature plastic spray plates, elastomeric protective covers, and dust caps that open automatically under water pressure. Large orifices reduce stagnant water and scale accumulation.

Standards and Compliance

Compliant with EN 15154-2:2006, ANSI Z358.1-2014, DIN 1988, EN 1717, and DIN-DVGW NW-0417CL0263. Eyewash signage per EN ISO 7010 / ASR A1.3, supplied as 100 × 100 mm PVC adhesive label.

Industrial Applications

Suitable for potable water supply in chemical laboratories, QC benches, dosing stations, water treatment facilities, paint shops, and maintenance areas with potential exposure to acids, alkalis, cleaning agents, or airborne particulates.

Selection vs. ClassicLine

The PremiumLine variant is specified where stainless steel construction and polished finish are required for visible or corrosive environments. For basic installations with lower material requirements, the ClassicLine version may be considered.

Datasheet and documents

Description

Technical Specifications

  • Material: Stainless steel
  • Surface: polished
  • Dimensions (H x W): 180 x 230 mm
  • Operating pressure: 1.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water connection: ¾“ male

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure applied. The rubber sleeves around the shower head protect the person seeking help from impact injuries. Dust covers on the shower head protect against contamination and open automatically when the eye shower is actuated by the water pressure. The large holes in the shower heads prevent standing water and thus calcification.

DVGW
ISO9001_D_72

Technical Description

  • stainless steel connection pipe for easy installation and alignment of the shower, polished, water inlet ¾” male
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of stainless steel, polished, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • high-performance spray heads made of stainless steel for large-scale dispersion of water, polished, 45° angled, with plastic spray plate, low calcification, incl. rubber sleeves and sealed dust caps, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • height 180 mm, projection 300 mm, total width incl. lever 230 mm
  • mounting height 900 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72.png