Globe Valves

Globe-type shut-off valves are used in industrial piping where positive isolation, controlled throttling, or a combination of shut-off and non-return function is required. The seat-disc geometry provides finer flow regulation than full-port valves, with the trade-off of higher pressure drop; this must be considered in Δp calculations and in Kv/Cv selection.

This category includes bellows-sealed and packed globe valves, in straight, angle, and Y-pattern configurations, for steam, condensate, hot water, thermal oil, air, process gases, hydrocarbons, and other compatible industrial fluids. Bellows-sealed versions are selected where stem leakage must be minimized, particularly in steam service, thermal systems, chemical duty, or applications where packing emissions are not acceptable. Graphite-packed designs remain suitable for general isolation duty, subject to periodic inspection of gland load and packing wear.

Available constructions include DIN/EN and ASME designs, with bolted bonnet, pressure seal bonnet, forged or cast steel bodies, as well as special versions for cryogenic service with extended bonnet, stop-check operation, compact forged design, and high-pressure duty. Selection is based on DN/NPS, pressure rating in PN or ASME Class, operating temperature, body and trim material compatibility, end connection type such as RF, RTJ, or BW, flow direction, seat tightness requirements, and maintenance conditions. For high-pressure or high-temperature service, pressure seal configurations should be evaluated, while Y-pattern valves are typically preferred where lower hydraulic resistance is required compared with conventional straight-pattern globe valves.

Bellow Seal

Gland Seal

Globe valve bellow sealed - FABA Plus | ARI

Ari-Armaturen

ARI-FABA®-Plus — Bellows Seal Valve for Steam and Process Networks The ARI-FABA®-Plus is a manually operated isolation valve featuring a dual metallic bellows seal and secondary graphite packing. It is utilized where shaft leakage must be minimized in steam, hot water, thermal oil, gas, and industrial fluid networks. Construction Variants...

View

Globe valve - FABA Plus ANSI | ARI

Ari-Armaturen

ARI-FABA®-Plus ANSI — Bellows Sealed Isolation Valve The ARI-FABA®-Plus ANSI is a globe stop valve featuring a dual metallic bellows and secondary graphite packing to minimize stem leakage. It is applicable in steam lines, gases, hot water, thermal oil, process water, vacuum, and ammonia systems. Connection Types and Classes Fig. 041: Flanged,...

View

Globe valve - FABA SUPRA C | ARI

Ari-Armaturen

ARI-FABA®-Supra C — Bellows Seal Valve for Chemical and Industrial Processes The ARI-FABA®-Supra C is a manually operated globe stop valve with a metallic bellows, designed for isolation and limited flow regulation in steam lines, hot water, thermal oil, gases, and process liquids. The C version corresponds to the Chemical version: the bellows is...

View

Globe valve - FABA SUPRA C ANSI | ARI

Ari-Armaturen

ARI-FABA®-Supra C ANSI — Bellows Seal Chemical Version The ARI-FABA®-Supra C ANSI is a globe stop valve with a bellows seal designed for isolating steam lines, hot water, thermal oil, gases, and process liquids. The Supra C version is the chemical version of the series, featuring a V-port plug and marginal seat as standard configuration. Connection...

View

Globe valve - FABA SUPRA I | ARI

Ari-Armaturen

ARI-FABA®-Supra I — Industrial Bellows Seal Valve The ARI-FABA®-Supra I is a globe-type isolation valve with a metallic bellows, designed for systems requiring stem leakage prevention in steam, condensates, hot water, thermal circuits, and auxiliary process lines. The I version is the industrial version: the bellows is shielded and positioned outside the...

View

Globe Valve - FABA SUPRA I ANSI | ARI

Ari-Armaturen

ARI-FABA®-Supra I ANSI — Bellows Seal Industrial Version The ARI-FABA®-Supra I ANSI is a globe stop valve with a metallic bellows designed for isolation or controlled throttling in steam lines, condensates, hot water, thermal oil, gases, and process liquids. The Supra I version features the bellows outside the main flow path, making it suitable for...

View

Globe valve - STOBU | ARI

Ari-Armaturen

ARI-STOBU Globe Valve with Stuffing Box The ARI-STOBU is a globe valve designed for isolation and, where the plug configuration allows, limited flow regulation. It is used in steam, condensate, hot water, gas, and industrial fluid lines, with material selection based on pressure, temperature, and chemical compatibility. Technical Specifications Available...

View

Globe valve V30.1 | Corex

Corex

COREX V30.1 Steam Valve with Packing The COREX V30.1 is a stop/globe valve featuring graphite packing, designed for flow isolation in water, steam, air, oil, and industrial fluid networks. Fluids should be free of coarse mechanical impurities, as particles can cause seat leakage or disc wear. Versions and Materials Cast Iron Version PN16: DN15–DN200,...

View

Globe valve Angle V30.1 | Corex

Corex

COREX V30.1 Angle Globe Valve The COREX V30.1 is a flanged angle globe valve with graphite packing, designed for flow isolation in water, hot water, steam, air, oils, and non-corrosive fluids without coarse mechanical impurities. The angle configuration is used when piping changes direction by 90° and requires simultaneous isolation. Versions and...

View

Forged globe valve Class 150/300 - G150/300 | ICP Valves

ICP Valves

Forged Globe Valve ICP G150/300 Class 150/300 The ICP G150RF / G300RF is a forged globe valve with RF flanged connection, designed for flow isolation in small DN and ANSI applications. It is unidirectional and suitable for steam, condensate, water, air, oils, and industrial fluids, provided compatibility with A105 or A182 F316L is ensured. Construction...

View

Forged globe valve Class 800 - G800 | ICP Valves

ICP Valves

Forged Globe Valve ICP G800 Class 800 The ICP G800 is a forged globe valve, Class 800, designed for small DN in steam, condensate, water, air, oil, and compatible industrial fluid lines. The product page lists it as a bi-directional valve, but for applications requiring critical sealing under differential pressure, installation direction should be...

View

Globe Valve Bellow Seal - Fig. 84 | Comeval

Comeval

Comeval Fig. 84 — ANSI Globe Valve with Bellows The Comeval Fig. 84 / Series UNIFLOW 84 is a cast globe valve designed for unidirectional flow, suitable for isolating lines in steam, gases, HVAC, lubrication, power, chemical, and oil & gas applications. Flow passes beneath the seat; the weir-type body results in higher pressure drop compared to gate...

View

Globe valve - UNIFLOW 80-89 | Comeval

Comeval

Steam Valve Comeval UNIFLOW 80/89 The Comeval UNIFLOW 80/89 is a metal-sealed globe valve designed for unidirectional flow isolation in process, power, HVAC, steam, gas, and industrial liquid applications compatible with construction materials. The globe geometry results in higher pressure drop compared to gate or ball valves but allows faster operation...

View

Globe valve - UNIFLOW Fig. 89 | Comeval

Comeval

Steam Valve Comeval UNIFLOW FIG. 89 The Comeval UNIFLOW FIG. 89 is a forged globe valve designed for unidirectional flow isolation in steam, air, gas, oil, water, and industrial fluid lines compatible with its construction materials. Flow enters below the seat, and installation must follow the arrow on the body. Construction Designed per API 602. Forged...

View

Globe Valve Bellow Seal - DIN | Valvosider

Valvosider

Valvosider DIN — Globe Valve with Bellows The Valvosider DIN bellows seal globe valve is designed for industrial steam lines, hot water, condensates, gases, and process fluids. The bellows minimize stem leakage, while the graphite packing serves as secondary sealing. PN and DN Versions The series includes flanged DIN versions with: PN10/16/25,...

View

Globe Valve Bellow Seal - ASME | Valvosider

Valvosider

Valvosider ASME — Bellow Seal Globe Valve The Valvosider ASME bellow seal globe valve is designed for applications requiring stem leakage isolation. Suitable for steam, condensates, hot water, thermal oils, gases, and industrial fluids, especially where piping specifications follow ASME Class rather than PN. Class Variants and Dimensions The series...

View

Globe Valve Y Type Bellow Seal - DIN | Valvosider

Valvosider

Valvosider Y-Type DIN — Globe Valve with Bellow Seal The Valvosider Y-Type Bellow Seal per DIN is a globe valve with an angled flow path. The Y geometry reduces local resistance compared to a traditional straight globe valve, maintaining its primary function: isolation and, with the appropriate disc, limited throttling. Suitable for steam, condensates,...

View

Globe Valve Bellow Seal Y Type - ASME | Valvosider

Valvosider

Valvosider Y-Type ASME — Globe Valve with Bellow Seal The Valvosider Y-Type Bellow Seal as per ASME is a globe valve with an inclined flow path, designed for lines requiring isolation with reduced stem leakage. The Y configuration is utilized when lower pressure drop is needed compared to a traditional globe valve, without altering the fundamental...

View

Globe Valve Angle Bellow Seal - DIN | Valvosider

Valvosider

Valvosider DIN 90° Angle — Bellows Sealed Angle Flow Valve The Valvosider DIN 90° Angle valve is a globe valve designed for isolating lines where a 90° flow direction change is required, minimizing stem leakage. Suitable for steam, condensate, hot water, thermal circuits, gases, and industrial fluids. The angle design reduces the need for separate elbows...

View

Globe Valve Bolted Bonnet - DIN | Valvosider

Valvosider

Valvosider DIN Steam Globe Valve with Bolted Bonnet The Valvosider DIN is a straight-through globe valve featuring a bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and loose disc. It is used as an isolation valve for steam, hot water, condensates, gases, and industrial fluids, with material selection based on pressure,...

View

Globe Valve Bolted Bonnet - ASME | Valvosider

Valvosider

Valvosider Steam Globe Valve ASME with Bolted Bonnet The Valvosider ASME is a straight-flow globe valve designed for isolation and controlled throttling in steam, hot water, condensate, gas, and industrial fluid lines. It features a bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and swivel plug disc, suitable for installations...

View

Globe Valve Y-Type Bolted Bonnet - DIN | Valvosider

Valvosider

Y-type Steam Trap Valvosider per DIN The Valvosider Y-type is an oblique flow globe valve featuring a bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and loose disc. The Y configuration reduces hydraulic resistance compared to a straight globe valve, while maintaining isolation or throttling capabilities when an appropriate disc is...

View

Globe Valve Y-Type Bolted Bonnet - ASME | Valvosider

Valvosider

Y-Type Valvosider Steam Valve per ASME The Valvosider Y-Type is an oblique flow globe valve featuring a bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and swivel plug disc. The Y geometry is selected for isolation or controlled throttling with reduced flow resistance compared to conventional straight globe valves. Pressure...

View

Globe Valve Angle Bolted Bonnet - DIN | Valvosider

Valvosider

Valvosider Angle Globe Valve per DIN The Valvosider 90° Angle Globe Valve features a stuffing box, bolted bonnet, outside screw & yoke, rising stem, rising handwheel, and loose disc. Its angular design is utilized when piping changes direction by 90° and simultaneous isolation or controlled throttling is required without additional angular fittings....

View

Showing 1-24 of 49 item(s)