Frostprotected self-draining body safety shower - PremiumLine - BR 830 395 | B-Safety B-Safety - 1
Frostprotected self-draining body safety shower - PremiumLine - BR 830 395 | B-Safety B-Safety - 1

Frostprotected self-draining body safety shower - PremiumLine - BR 830 395 | B-Safety

B-Safety BR 830 395 PremiumLine

Body safety shower with frost protection via automatic self-draining and underground actuation. Designed for outdoor industrial installations where water in the piping must not remain exposed to low ambient temperatures. The assembly is intended for body drenching only; no eyewash function is included.

Technical Data

  • Construction: stainless steel, polished finish
  • Dimensions: 2330 x 350 x 600 mm
  • Minimum flow pressure: 1.5 bar
  • Operating pressure: 1.5–3 bar dynamic
  • Flow rate: 50 l/min
  • Water inlet: ¾” male
  • Base: 200 x 200 mm with 4 anchor holes
  • T-type foot pedal: 350 mm width, anti-slip coating

Self-Draining Operation

The ball valve is stainless steel, installed in an underground stainless enclosure. Actuation is via foot pedal, wire rope, and angular transmission to a 1000 mm pull rod. After use, the piping automatically drains to a depth of 1000 mm, reducing risk of water freezing in the vertical section.

Shower Head and Piping

Support pipe is three-piece, 1¼” stainless steel, with upper and lower 1¼” female connections. Arm is ¾”, 600 mm projection. The stainless shower head is self-draining and includes integrated flow control at 50 l/min for operation within 1.5–3 bar.

Standards and Variants

Complies with EN 15154-1:2006, EN 15154-5:2019, and ANSI Z358.1-2014. Also references DIN 1988, EN 1717, DIN-DVGW/DVGW NW-0416CL0425, and GOST-R. Available in 50 l/min (hazard class I), 75 l/min (class II), and 110 l/min (class III) per EN 15154-5:2019.

Maintenance

Routine checks: flow rate, dynamic pressure, underground valve tightness, free drainage, foot pedal/wire rope operation, and shower head cleanliness.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2330 mm
  • Projection: 600 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ male

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification- and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

ISO9001_D_72

Technical Description

  • actuation with stainless steel foot lever in the shape of a T, covered with black non-slip tape, total width 350 mm, mounting via stainless steel cable on angle diversion
  • angle diversion to pull rod made of stainless steel, with mounting accessories made of stainless steel
  • ball valve made of stainless steel as underfloor actuation, mounted in stainless steel cabinet, with pull rod activation 1000 mm, DIN-DVGW tested and certificated, with automatic self-draining in 1000 mm depth
  • base plate with 4 mounting holes of stainless steel, polished, dimensions 200 x 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2330 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 600 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72