Body safety shower stainless steel, ceiling mounted, exposed pipework - PremiumLine - BR 085 095 | B-Safety B-Safety - 1
Body safety shower stainless steel, ceiling mounted, exposed pipework - PremiumLine - BR 085 095 | B-Safety B-Safety - 1

Body safety shower stainless steel, ceiling mounted, exposed pipework - PremiumLine - BR 085 095 | B-Safety

Ceiling-Mounted Body Safety Shower B-Safety BR 085 095 PremiumLine

Ceiling-mounted emergency body shower with exposed piping and ¾" female water inlet. This configuration is selected when water supply is routed from above and visual inspection, periodic testing, and maintenance access to the line are required. Installation height is 2445 mm ±100 mm, providing 245 mm free headroom below the shower head.

Construction

  • Main components: Stainless steel AISI 316
  • Shower head: AISI 316, self-draining design
  • ¾" ball valve: AISI 316, operated via pull rod
  • Piping and ceiling flange: AISI 316
  • Flow regulator: POM
  • Pull rod with ring: AISI 316, length 700 mm

Hydraulic Operation

Standard BR 085 095 operates at dynamic pressure 1.5–3 bar, flow rate 50 l/min. Integrated flow regulator maintains controlled spray pattern within specified pressure range.

Flow Rate Variants

  • 50 l/min: hazard class I per EN 15154-5:2019
  • 75 l/min / 20 GPM: hazard class II
  • 110 l/min: hazard class III

Flow rate selection should be based on chemical hazard assessment, available network supply, line pressure drop, and shower location relative to hazard zone.

Standards and Accessories

Technical documentation references EN 15154-1:2006, EN 15154-5:2019, ANSI Z358.1-2014, DIN 1988, EN 1717, and DIN-DVGW / DVGW NW-0416CL0425. Available accessories: ¾" service isolation valve, thermostatic mixing 20–43 °C, IP65 flow switch, EX zone 1 & 2 switch, 230 V / 50 Hz alarm.

Datasheet and documents

Description

Technical Specifications

  • Material: Stainless steel
  • Surface: polished
  • Headroom: 245 mm
  • Installation height: 2445 mm (± 100 mm)
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

The integrated automatic flow regulator ensures a standard-compliant spray pattern regardless of the water pressure on site. With the enclosed safety sign according to EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is marked and visibility is improved. The viewing distance is 15 meters.

DVGW
ISO9001_D_72

Technical Description

  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • ceiling shower arm ¾“ of stainless steel, polished, headroom 245 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 2445 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72