Body safety shower stainless steel, ceiling mounting, recessed version - PremiumLine - BR 083 095 | B-Safety B-Safety - 1
Body safety shower stainless steel, ceiling mounting, recessed version - PremiumLine - BR 083 095 | B-Safety B-Safety - 1

Body safety shower stainless steel, ceiling mounting, recessed version - PremiumLine - BR 083 095 | B-Safety

Ceiling-Mounted Body Safety Shower B-Safety BR 083 095 PremiumLine

Ceiling-mounted safety shower for embedded installation, with ¾" male water inlet and vertical overhead discharge. This configuration is suitable for work areas where wall piping is impractical or where unobstructed operator access is required. Technical documentation specifies installation height at 2465 mm ±100 mm and free headroom of 265 mm.

Construction and Materials

  • Shower head: Stainless steel AISI 316
  • ¾" Ball valve: Stainless steel AISI 316
  • Piping: AISI 316, polished finish
  • Pull rod with ring: AISI 316, length 700 mm
  • Cover rosette: AISI 304
  • Flow regulator: POM

The shower head is self-draining to minimize water retention post-operation. This is relevant for installations with periodic testing, where scale deposition and stagnant water volumes impact maintenance intervals.

Hydraulic Data

Standard BR 083 095 version delivers 50 l/min at dynamic pressure 1.5–3 bar. Integrated automatic flow regulator maintains spray pattern within specified pressure range.

Flow Rate Variants

  • BR 083 095: 50 l/min, hazard class I per EN 15154-5:2019
  • BR 083 095 / 75L: 75 l/min / 20 GPM, hazard class II
  • BR 083 095 / 110L: 110 l/min, hazard class III

Flow rate selection should be based on risk assessment, chemical hazard, available hydraulic supply, and required flushing duration.

Standards and Options

Documentation references EN 15154-1:2006, EN 15154-5:2019, ANSI Z358.1-2014, DIN 1988, EN 1717, DIN-DVGW / DVGW NW-0416CL0425, and GOST-R. Options include activation cable, 1150 mm pull rod, stainless steel ¾" isolation valve, thermostatic mixing 20–43 °C, IP65 flow switch, EX zone 1 & 2 switch, and 230 V / 50 Hz alarm system.

Datasheet and documents

Description

Technical Specifications

  • Material: Stainless steel
  • Surface: polished
  • Headroom: 265 mm
  • Installation height: 2465 mm (± 100 mm)
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ male

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

The integrated automatic flow regulator ensures a standard-compliant spray pattern regardless of the water pressure on site. With the enclosed safety sign according to EN ISO 7010 and ASR A1.3, the B-SAFETY emergency shower is marked and visibility is improved. The viewing distance is 15 meters.

DVGW
ISO9001_D_72

Technical Description

  • connection pipe ¾“ of stainless steel, polished, length 75 mm, water inlet ¾” male
  • push-on rosette of polyamide to cover the installation
  • ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • ceiling shower arm ¾“ of stainless steel, polished, headroom 265 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 2465 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72