Actuators

Brackets - VDI - VDE - MBH | Eurotec Eurotec - 1

Brackets - VDI - VDE - MBH | Eurotec

Brackets - VDI - VDE - MBH | Eurotec
Eurotec
Eurotec VDI/VDE – MBH Mounting Brackets Eurotec MBH brackets are adjustable mounting supports for limit switch boxes, position indicators, or feedback accessories on pneumatic rotary actuators. They are used in quarter-turn valve assemblies where mechanical adaptation is required between the actuator and feedback device. Mechanical Compatibility...
View
Brackets - VDI - VDE - MB-WDF | Eurotec Eurotec - 1

Brackets - VDI - VDE - MB-WDF | Eurotec

Brackets - VDI - VDE - MB-WDF | Eurotec
Eurotec
Eurotec VDI/VDE Brackets – MB-WDF Eurotec MB-WDF brackets are used for mounting double sensors or pucks on pneumatic quarter-turn valve actuators. The assembly combines the MB series with the WDF element, allowing the same sensor or puck to be installed across different actuator sizes. This supports standardization and simplifies inventory for maintenance...
View
Adaptors - VDI - VDE - WDF | Eurotec Eurotec - 1

Adaptors - VDI - VDE - WDF | Eurotec

Adaptors - VDI - VDE - WDF | Eurotec
Eurotec
Eurotec VDI/VDE – WDF Adaptors Eurotec WDF adaptors are mechanical interfaces designed for mounting double sensors or pucks on pneumatic quarter-turn valve actuators. Their primary function is to standardize the mechanical interface, enabling the same position sensor or puck to be used across actuators of different sizes without requiring sensor type...
View
Adaptors - VDI - VDE - WV | Eurotec Eurotec - 1

Adaptors - VDI - VDE - WV | Eurotec

Adaptors - VDI - VDE - WV | Eurotec
Eurotec
Eurotec VDI/VDE – WV Shaft Extensions Eurotec WV shaft extensions are designed for pneumatic rotary actuators with VDI/VDE 3845 interface. They are used when the actuator shaft height is insufficient for proper coupling with limit switch boxes, dual sensors, pucks, or visual position indicators. Variants SI-WV10: Polypropylene shaft extension, length 10...
View
Adaptors - ARE | Eurotec Eurotec - 1

Adaptors - ARE | Eurotec

Adaptors - ARE | Eurotec
Eurotec
Eurotec ARE Adaptors Eurotec ARE adaptors (coupling blanks) are mechanical interface components for connecting rotary actuators to valve shafts. They are used when direct actuator-to-valve connection is not possible due to mismatched shaft geometry, height, or drive configuration. The actuator side of the ARE is machined to match the actuator output,...
View
Brackets - MBNE - MBNS | Eurotec Eurotec - 1

Brackets - MBNE - MBNS | Eurotec

Brackets - MBNE - MBNS | Eurotec
Eurotec
Eurotec MBNE / MBNS Brackets Eurotec MBNE / MBNS brackets are designed for mounting rotary actuators to valves where direct mounting is not feasible or recommended. They are used with quarter-turn valves—such as ball, butterfly, and plug valves—to ensure correct torque transmission and shaft alignment between actuator and valve. Technical Specifications...
View
Adaptors - RHE - RHX | Eurotec Eurotec - 1

Adaptors - RHE - RHX | Eurotec

Adaptors - RHE - RHX | Eurotec
Eurotec
Eurotec RHE / RHX Adaptors Eurotec RHE / RHX adaptors are mechanical coupling devices for quarter-turn actuators and valves. They are used when the actuator output and valve stem have different geometries or dimensions, such as square, double square, or octagonal profiles. Types and Applications RHE: Square-to-square adaptors for matching different...
View
Mounting Kits - MSH | Eurotec Eurotec - 1

Mounting Kits - MSH | Eurotec

Mounting Kits - MSH | Eurotec
Eurotec
Mounting Kits Eurotec MSH Eurotec MSH mounting kits are designed for installing limit switch boxes on manual valves. They enable open/close position feedback from valves that do not have actuators, allowing PLC or DCS systems to monitor valve status and confirm correct positioning in process lines. Functional Role The MSH kit does not automate the valve...
View
Mounting Kits - MSH01-40x30 | Eurotec Eurotec - 1

Mounting Kits - MSH01-40x30 | Eurotec

Mounting Kits - MSH01-40x30 | Eurotec
Eurotec
Mounting Kit Eurotec MSH01-40x30 The Eurotec MSH01-40x30 is an assembly kit designed for mounting an i-box or double sensors on manually operated valves. When used with the shaft feedthrough WDF, it enables position feedback from valves that lack pneumatic or electric actuators. Functional Role The MSH01-40x30 does not automate the valve or transmit...
View
Mounting Kits - MSH01-80x30 | Eurotec Eurotec - 1

Mounting Kits - MSH01-80x30 | Eurotec

Mounting Kits - MSH01-80x30 | Eurotec
Eurotec
Mounting Kit Eurotec MSH01-80x30 The Eurotec MSH01-80x30 is a mounting kit designed for installation of i-box, double sensors, or angle sensors on manually operated valves. When combined with the shaft feedthrough WDF, it enables position feedback from valves lacking pneumatic or electric actuators. Functional Role The MSH01-80x30 does not automate the...
View
Mounting Kits - MSH-EPV | Eurotec Eurotec - 1

Mounting Kits - MSH-EPV | Eurotec

Mounting Kits - MSH-EPV | Eurotec
Eurotec
Mounting Kit Eurotec MSH-EPV Eurotec MSH-EPV is a mounting kit with a polymer mounting plate, designed for the installation of double sensors on manually operated valves. It is used when a manual valve must provide reliable position feedback (open/close) to PLC, DCS, or local panel, without the need for a pneumatic or electric actuator. Functional Role...
View
Showing 49-59 of 59 item(s)
Related posts
EN 12569 Industrial Valves Terminology Standard
EN 12569 Industrial Valves Terminology Standard
Posted in: Technical Standards Library, European EN Standards
06/19/2026
EN 12569 is the European standard that establishes standardized terminology for industrial valves. The objective of...
Read more
ISO 5211 Valve and Actuator Mounting Interface Standard
ISO 5211 Valve and Actuator Mounting Interface Standard
Posted in: Technical Standards Library, ISO Standards
06/14/2026
ISO 5211 is the international standard defining mounting interfaces between quarter-turn industrial valves and...
Read more
Actuators