Ντους Ασφαλείας σώματος με ντους ασφαλείας οφθαλμών B-Safety για εγκατάσταση πάνω από την πόρτα τύπος ClassicLine BR 871 085 ...
Ντους Ασφαλείας σώματος με ντους ασφαλείας οφθαλμών B-Safety για εγκατάσταση πάνω από την πόρτα τύπος ClassicLine BR 871 085 ...

Ντους Ασφαλείας σώματος με ντους ασφαλείας οφθαλμών B-Safety για εγκατάσταση πάνω από την πόρτα τύπος ClassicLine BR 871 085

B-Safety BR 871 085 ClassicLine

Επίτοιχος συνδυασμός ντους ασφαλείας σώματος με ντους οφθαλμών, για εγκατάσταση πάνω από πόρτα ή άνοιγμα διέλευσης. Η διάταξη επιλέγεται όταν δεν υπάρχει διαθέσιμος πλευρικός τοίχος στη ζώνη χρήσης ή όταν το σημείο έκπλυσης πρέπει να τοποθετηθεί σε είσοδο εργαστηρίου, χημικής αποθήκης ή χώρου διεργασίας.

Τεχνικά δεδομένα

  • Τύπος: ClassicLine, επίτοιχο, εγκατάσταση πάνω από πόρτα
  • Συνολικό ύψος: 1625 mm
  • Προβολή: 525 mm
  • Ύψος εγκατάστασης: 810 mm
  • Είσοδος νερού: ¾” θηλυκή, με άνω/κάτω σύνδεση για γραμμή κυκλοφορίας
  • Πίεση λειτουργίας: 1,5–3 bar
  • Παροχή σώματος: 50 l/min, με εκδόσεις 75 ή 110 l/min
  • Παροχή οφθαλμών: 14 l/min σε 2–5 bar

Κατασκευή και λειτουργία

Η σωλήνωση είναι ανοξείδωτη, με πράσινη χημικά ανθεκτική βαφή πούδρας. Το ντους σώματος διαθέτει σφαιρική βάνα ¾” από ανοξείδωτο χάλυβα, ενεργοποίηση με ράβδο έλξης 700 mm και πλαστική αυτοαποστραγγιζόμενη κεφαλή καταιονισμού. Ο ενσωματωμένος ρυθμιστής ροής διατηρεί παροχή 50 l/min στο εύρος 1,5–3 bar δυναμικής πίεσης.

Ντους οφθαλμών

Η μονάδα οφθαλμών είναι ενσωματωμένη ClassicLine με δύο κεφαλές 45°, βάνα ½”, μοχλό PUSH και πλάκα 130 mm με φωσφορίζουσα ένδειξη κατά DIN 67510. Οι κεφαλές διαθέτουν πλαστική πλάκα διασποράς, ελαστικά προστατευτικά και καλύμματα σκόνης με ανακλινόμενο μηχανισμό.

Πρότυπα και εφαρμογές

Αναφέρεται συμμόρφωση με ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 και EN 15154-5:2019. Κατάλληλο για εργαστήρια, χημικές αποθήκες, χώρους παραγωγής και σημεία διέλευσης όπου απαιτείται άμεση πρόσβαση σε έκπλυση σώματος/οφθαλμών.

Συντήρηση

Έλεγχος παροχής, δυναμικής πίεσης, στεγανότητας βανών, καθαρότητας κεφαλών, λειτουργίας PUSH, καλυμμάτων σκόνης και ελεύθερης κίνησης της ράβδου έλξης.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: stainless steel, plastic
  • Color: green, black
  • Total height: 1625 mm
  • Projection: 525 mm
  • Installation height: 810 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the ClassicLine series are made of high-quality materials and are just as suitable for use in laboratories and research as they are for rough use in industry. B-SAFETY’s green chemical-resistant polyester powder coating has proven itself in many aggressive environments and is resistant to many acids and alkalis.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
  • wall flange with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
  • integrated ClassicLine safety eye shower with two spray heads 45°
  • connection pipe of stainless steel for easy installation and alignment of the shower, chemical resistant green powder coated, water inlet ¾” male
  • ball valve ½” of made of dezincification-resistant brass, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of steel, chemical resistant green powder coated, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 2 to 5 bar flow pressure
  • high-performance spray heads for large-scale dispersion of water, 45° angled, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • two connection pipes ¾“ of stainless steel, chemical resistant green powder coated, total length 1500 mm
  • wall flange as T-version with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
  • connection adapter of stainless steel, polished, with integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • connection pipe ¾“ of stainless steel, chemical resistant green powder coated, length 75 mm
  • ball valve ¾” stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, chemical resistant green powder coated, length 700 mm
  • holder for pull rod made of steel, chemical resistant green powder coated
  • connection pipe ¾“ of stainless steel, chemical resistant green powder coated, length 500 mm
  • wall flange with 4 mounting holes of stainless steel, chemical resistant green powder coated, water inlet ¾” female
  • wall shower arm ¾“ of stainless steel, chemical resistant green powder coated, projection 625 mm
  • high-performance shower head of chemical resistant plastics, black, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 810 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW    ISO9001_D_72