Μαγνητικοί Δείκτες Δίσκων Διαρραγής Donadon Donadon SDD - 1
Μαγνητικοί Δείκτες Δίσκων Διαρραγής Donadon Donadon SDD - 1

Μαγνητικοί Δείκτες Δίσκων Διαρραγής Donadon

Μαγνητικός δείκτης διαρραγής NAM 03/HT DonadonSDD

Ο NAM 03/HT χρησιμοποιείται για ένδειξη ανοίγματος δίσκου διαρραγής σε βιομηχανικά συστήματα ανακούφισης πίεσης. Ο αισθητήρας μαγνητικής προσέγγισης εγκαθίσταται κατάντη του δίσκου, μέσα στην αντίστοιχη σπειρωτή υποδοχή του holder. Ο μόνιμος μαγνήτης παρέχεται μαζί με τον δίσκο και μετατοπίζεται όταν ο δίσκος ανοίξει, ενεργοποιώντας το σήμα προς το σύστημα ασφαλείας της εγκατάστασης.

Τεχνικά χαρακτηριστικά

  • Μοντέλο: NAM 03/HT
  • Θερμοκρασία αποθήκευσης: -40°C έως +200°C, σύμφωνα με την πιστοποίηση ATEX
  • Μέγιστη τάση μεταγωγής: 60 VDC
  • Μέγιστο ρεύμα μεταγωγής: 0,4 A
  • Καλώδιο: 2 x 0,2 mm², Ø 3,4 mm, 200°C, Class C2
  • Βαθμός προστασίας: IP67
  • Συμβατοί δίσκοι: DCD, DIF, LPD, SCD, SCR, Y90, KRD

ATEX και σύνδεση σε σύστημα ασφαλείας

Ο NAM 03/HT είναι διάταξη intrinsic safety και αναφέρεται με ταξινομήσεις ATEX II 2GD Ex mb II T4/T6, Ex tD A21 IP67 T135°C/T85°C, ATEX II 1GD Ex ia IIB T3/T6 και Ex iaD 20 T200°C/T85°C. Η σύνδεση του διπολικού καλωδίου 2 m πρέπει να γίνεται μέσω κατάλληλου intrinsic safety barrier. Με φράγμα Ex ia καλύπτονται ζώνες 0, 20, 1, 21, 2, 22, ενώ με Ex ib καλύπτονται ζώνες 1, 21, 2, 22.

Επιλογή και εφαρμογή

Η συμβατότητα με το ρευστό δεν καθορίζεται από τον αισθητήρα μόνο, αλλά από τα υλικά του δίσκου και του holder, καθώς τα υλικά σε επαφή με το process fluid είναι τα ίδια με αυτά της διάταξης δίσκου/στηρίγματος. Χρησιμοποιείται σε γραμμές διεργασίας, δοχεία πίεσης, αντιδραστήρες, εγκαταστάσεις αερίων, χημικές μονάδες και εφαρμογές όπου απαιτείται επιβεβαίωση ανοίγματος δίσκου στο PLC, DCS ή SIS.

FAQ

Απαιτείται αντικατάσταση μετά από άνοιγμα;
Ναι. Οι ανταλλακτικοί δίσκοι παρέχονται με νέο magnetic target.

Είναι κατάλληλος για περιοχές ATEX;
Ναι, εφόσον χρησιμοποιηθεί το κατάλληλο barrier για τη ζώνη εγκατάστασης.

Περιγραφή

NAM03HT

Donadon magnetic NAM 03/HT rupture indicators are recommended for use with our rupture discs.

The NAM 03/HT indicator is composed of:

a magnetic proximity type sensor installed in the corresponding threaded housing downstream in the rupture disc holder to detect opening

a target with a permanent magnet supplied with the disc

When the disc opens the magnet is displaced and the sensor activates. Replacement discs are supplied with a new target.

NAM 03/HT is an intrinsic safety device certified

ATEX II 2GD Ex mb II T4/T6

Ex tD A21 IP67 T135°C/T85°C

ATEX II 1GD Ex ia IIB T3/T6

Ex iaD 20 T200°C/T85°C

It can therefore may be used in locations where potentially explosive atmospheres are continually present (classified zones 0, 20 and 1, 21 and 2, 22 according to European Directive 94/9/EC (ATEX)).

NAM 03/HT is normally supplied with 2 metres of bipolar cable. The cables of the alarm system must be connected to the plant’s safety system through an adequate safety barrier.

Ex ia barrier -> zone 0; 20; 1; 21; 2; 22

Ex ib barrier -> zone 1; 21; 2; 22

ModelNAM 03/HT
Storage temperatureFrom -40°C to +200°C in accordance with ATEX certification
Material in contact with process fluidSame as disc and disc holder
Max switching voltage60 VDC
Max switching current0,4 A
Cable2 x 0.2 mm2,ø 3.4 mm, 200°C, Class C2
Degree of protectionIP 67
Rupture diskDCD, DIF, LPD, SCD, SCR, Y90, KRD

Certifications

Quality certifications are a guarantee. DonadonSDD has obtained the following certifications.

DonadonSDD provides high-quality products that meet the safety requirements of the systems where they are installed. The organisation and procedures fully comply with the ISO 9001 standard to ensure the utmost quality for our products. Our quality system has also met the stringent requirements of the UNI EN 9100 standard concerning design, development, and manufacture of rupture discs for the aerospace industry.

DonadonSDD products – such as rupture discs, explosion venting panels, and rupture indicators – are certified in compliance with PED directive 2014/68/EU or ATEX directive 2014/34/EU. The rupture discs alone are manufactured, tested, and certified in compliance with ASME directive, Section VIII, Division 1 and carry the relative UD stamp. 

DonadonSDD is subject to inspections carried out by 3-A Sanitary Standard, Inc. (3-A SSI) so that our rupture discs can meet the highest sanitary standards.

Upon request, our clients can ask independent inspectors to certify single batches.

DOWNLOAD CERTIFICATIONS