Επαγωγικοί Δείκτες Δίσκων Διαρραγής Donadon Donadon SDD - 1
Επαγωγικοί Δείκτες Δίσκων Διαρραγής Donadon Donadon SDD - 1

Επαγωγικοί Δείκτες Δίσκων Διαρραγής Donadon

Επαγωγικός δείκτης διαρραγής NAM 05 DonadonSDD

Ο NAM 05 είναι επαγωγικός δείκτης για επιβεβαίωση ανοίγματος δίσκου διαρραγής ή πάνελ εκτόνωσης έκρηξης. Τοποθετείται κατάντη της διάταξης ανακούφισης και χρησιμοποιείται όταν το σήμα πρέπει να μεταφερθεί σε PLC, DCS, SIS ή πίνακα συναγερμού μέσω κυκλώματος intrinsic safety.

Αρχή λειτουργίας

Η διάταξη αποτελείται από:

  • επαγωγικό αισθητήρα προσέγγισης,
  • μεταλλικό στόχο που παρέχεται μαζί με τον δίσκο ή το πάνελ.

Όταν ο δίσκος ή το πάνελ ανοίξει, ο στόχος μετατοπίζεται και ο αισθητήρας αλλάζει κατάσταση. Τα ανταλλακτικά στοιχεία παρέχονται με νέο στόχο, ώστε η λειτουργία ένδειξης να αποκαθίσταται μαζί με την αντικατάσταση της διάταξης ανακούφισης.

Τεχνικά χαρακτηριστικά

  • Μοντέλο: NAM 05
  • Ονομαστική τάση τροφοδοσίας: 8,2 V
  • Θερμοκρασία αποθήκευσης: -40°C έως +100°C
  • Καλώδιο: 2 m, διπολικό, PVC
  • Βαθμός προστασίας: IP66/67
  • Συμβατοί δίσκοι: DCD, DIF, LPD, SCD, SCR, Y90, KRD
  • Συμβατά πάνελ: PS/C, PS/R

ATEX και εγκατάσταση

Ο NAM 05 αναφέρεται με πιστοποίηση ATEX II 1G Ex ia IIC T6 και ATEX II 1D Ex iaD 20 T108°C. Η εγκατάσταση σε ζώνες 0, 20, 1, 21, 2, 22 εξαρτάται από τον τύπο του intrinsic safety barrier. Με Ex ia καλύπτονται ζώνες 0/20 και άνω, ενώ με Ex ib η χρήση περιορίζεται σε ζώνες 1/21 και 2/22. Η εγκατάσταση πρέπει να γίνεται σύμφωνα με EN 60079-14.

Χρήση σε βιομηχανικές εφαρμογές

Ο επαγωγικός δείκτης επιλέγεται σε γραμμές διεργασίας, φίλτρα σκόνης, σιλό, αντιδραστήρες και δοχεία πίεσης όπου απαιτείται ηλεκτρική επιβεβαίωση εκτόνωσης. Είναι κατάλληλος για εφαρμογές με χαμηλές πιέσεις, πιθανή αντίθλιψη ή περιοχές ATEX, εφόσον η καλωδίωση και το barrier επιλεγούν σύμφωνα με την ταξινόμηση της ζώνης.

FAQ

Αντικαθίσταται μετά από ενεργοποίηση;
Ο αισθητήρας παραμένει. Ο δίσκος ή το πάνελ αντικαθίσταται μαζί με νέο στόχο.

Μπορεί να χρησιμοποιηθεί σε πάνελ έκρηξης;
Ναι, είναι συμβατός με PS/C και PS/R.

Αντικαθιστά τον υπολογισμό ανακούφισης πίεσης;
Όχι. Παρέχει μόνο σήμα κατάστασης προς το σύστημα ελέγχου ή ασφαλείας.

Περιγραφή

NAM05

NAM 05 inductive rupture alarm systems are recommended for installation on rupture discs and explosion vent panels.

The NAM 05 indicator is composed of:

an inductive proximity sensor installed downstream the disc or panel

a target supplied with the disc or panel

When the disc opens, the target is moved and the sensor sends a signal to the plant safety system. The discs or panels are supplied with a new target.

NAM 05 is an intrinsic safety device certified:

ATEX II 1G Ex ia IIC T6

ATEX II 1D Ex iaD 20 T 108°C

It can therefore may be used in locations where potentially explosive atmospheres are present (classified zones 0, 20, 1, 21, 2, 22 according to European Directive 94/9/EC (ATEX)).

Zone installation also depends on barrier type:

Ex ia barrier zone 0; 20 ; 1; 21; 2; 22

Ex ib barrier zone 1; 21; 2; 22

NAM 05 is normally supplied with 2m bipolar cable that must be connected to the plant’s safety system through an intrinsic safety barrier.

Installation must be according to standard EN 60079-14.

ModelNAM 05
Storage temperatureFrom -40°C to +100°C
Nominal supply voltage8.2 V
Cable2 m in PVC
Degree of protectionIP 66/67
Rupture diskDCD, DIF, LPD, SCD, SCR, Y90, KRD
Explosion venting panelsPS/C, PS/R

Certifications

Quality certifications are a guarantee. DonadonSDD has obtained the following certifications.

DonadonSDD provides high-quality products that meet the safety requirements of the systems where they are installed. The organisation and procedures fully comply with the ISO 9001 standard to ensure the utmost quality for our products. Our quality system has also met the stringent requirements of the UNI EN 9100 standard concerning design, development, and manufacture of rupture discs for the aerospace industry.

DonadonSDD products – such as rupture discs, explosion venting panels, and rupture indicators – are certified in compliance with PED directive 2014/68/EU or ATEX directive 2014/34/EU. The rupture discs alone are manufactured, tested, and certified in compliance with ASME directive, Section VIII, Division 1 and carry the relative UD stamp. 

DonadonSDD is subject to inspections carried out by 3-A Sanitary Standard, Inc. (3-A SSI) so that our rupture discs can meet the highest sanitary standards.

Upon request, our clients can ask independent inspectors to certify single batches.

DOWNLOAD CERTIFICATIONS