Αυτόνομο Ντους ασφαλείας οφθαλμών B-Safety με μία κεφαλή ψεκασμού 45° χειρός τύπος PremiumLine BR 833 095 - B-Safety
Αυτόνομο Ντους ασφαλείας οφθαλμών B-Safety με μία κεφαλή ψεκασμού 45° χειρός τύπος PremiumLine BR 833 095 - B-Safety

Αυτόνομο Ντους ασφαλείας οφθαλμών B-Safety με μία κεφαλή ψεκασμού 45° χειρός τύπος PremiumLine BR 833 095

B-Safety BR 833 095 PremiumLine

Ντους ασφαλείας σώματος δαπέδου με χειροκίνητο ντους οφθαλμών μίας κεφαλής 45°. Προορίζεται για σημεία όπου απαιτείται πλήρης έκπλυση σώματος και παράλληλα κατευθυνόμενη έκπλυση οφθαλμών, προσώπου ή τοπικά εκτεθειμένης περιοχής. Η εγκατάσταση απαιτεί δίκτυο νερού 1 ¼” θηλυκό, με άνω και κάτω είσοδο για σύνδεση σε γραμμή κυκλοφορίας.

Τεχνικά δεδομένα

  • Κατασκευή PremiumLine: ανοξείδωτος χάλυβας AISI 316, γυαλισμένη επιφάνεια
  • Διαστάσεις: 2300 x 200 x 630 mm
  • Βάση: Ø200 mm με 4 οπές αγκύρωσης
  • Πίεση λειτουργίας σώματος: 1,5–3 bar δυναμική πίεση
  • Παροχή σώματος: 50 l/min
  • Παροχή ντους οφθαλμών: 7 l/min
  • Πίεση λειτουργίας οφθαλμών: 1,5–5 bar
  • Εύκαμπτος σωλήνας χειρός: 1,5 m, ανοξείδωτη επένδυση, είσοδος ½” θηλυκή
  • Ενεργοποίηση σώματος: ράβδος έλξης 700 mm
  • Ενεργοποίηση οφθαλμών: εργονομική λαβή με ρυθμιζόμενη, μη αυτοκλειόμενη βάνα

Υλικά και λειτουργία

Η κεφαλή σώματος, η σωλήνωση, η σφαιρική βάνα, η βάση, τα ταφ και η ράβδος χειρισμού είναι AISI 316. Το χειροκίνητο ντους οφθαλμών είναι από Luran, με μέρη σε επαφή με το νερό από DZR CW724R και κεφαλή POM/EPDM. Η κεφαλή σώματος είναι αυτοαποστραγγιζόμενη, μειώνοντας στάσιμα νερά και επικαθίσεις.

Πρότυπα και εγκρίσεις

Συμμόρφωση με EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019 και ANSI Z358.1-2014. Αναφέρονται επίσης EN 1717, DIN 1988, DIN-DVGW/DVGW NW-0416CL0425 και NW-0417CL0263, καθώς και GOST-R.

Εκδόσεις παροχής

  • BR 833 095: 50 l/min, hazard class I
  • BR 833 095 / 75L: 75 l/min / 20 GPM, hazard class II
  • BR 833 095 / 110L: 110 l/min, hazard class III

FAQ

Πότε επιλέγεται η χειροκίνητη κεφαλή 45°;
Όταν η έκπλυση πρέπει να κατευθύνεται από τον χρήστη ή τον χειριστή συντήρησης, ειδικά σε τοπική επαφή με χημικά.

Τι ελέγχεται περιοδικά;
Παροχή, δυναμική πίεση, λειτουργία μη αυτοκλειόμενης βάνας, κατάσταση εύκαμπτου σωλήνα, καθαρότητα κεφαλής και στεγανότητα σφαιρικής βάνας.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 2300 mm
  • Projection: 630 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: 1 ¼” female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcificationand maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW Certification
TUV NORD  ISO 9001

Technical Description

  • including top and bottom water inlet 1 ¼” female for installation in circulation lines, plug 1 ¼” of stainless steel
  • base plate with 4 mounting holes of stainless steel, polished, diameter 200 mm
  • stand pipe 1 ¼” of stainless steel three-part, polished, with top and bottom water inlet 1 ¼” female, total height 2300 mm
  • connection piece of stainless steel, for easy installation and alignment of the shower
  • ball valve ¾” of stainless steel, with quick connect system and pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • wall shower arm ¾“ of stainless steel, polished, projection 630 mm
  • integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • inclusive ClassicLine hand-held eye shower with one spray head 45°, for mounting on standpipe, position and orientation freely selectable
  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray head for large-scale dispersion of water, 45° angled, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism
  • integrated flow regulation 7 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • sturdy wall bracket with positioning of the shower, including mounting kit for mounting on the standpipe
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW    ISO9001_D_72