Emergency shower body safety shower with eye shower - PremiumLine - BR 871 095 | B-Safety B-Safety - 1
Emergency shower body safety shower with eye shower - PremiumLine - BR 871 095 | B-Safety B-Safety - 1

Emergency shower body safety shower with eye shower - PremiumLine - BR 871 095 | B-Safety

B-Safety BR 871 095 PremiumLine

Wall-mounted safety shower and eye wash combination unit, constructed in stainless steel (PremiumLine execution). The BR 871 configuration is specified for installations where the body shower arm must be positioned above an opening or where wall space is limited. Both body and eye wash are supplied from a common hydraulic line.

Technical Data

  • Material: Stainless steel, polished finish
  • Overall height: 1625 mm
  • Arm projection: 525 mm
  • Installation height: 810 mm
  • Water inlet: ¾” female, top/bottom connection for circulation line
  • Operating pressure: 1.5–3 bar
  • Body flow rate: 50 l/min, variants available for 75 or 110 l/min
  • Eye wash flow rate: 14 l/min at 1.5–5 bar dynamic pressure

Construction and Operation

Unit includes stainless steel wall flanges, ¾” connection pipes, ¾” body shower arm, and ¾” ball valve actuated by a 700 mm stainless steel pull rod. The spray head is stainless, self-draining, with integrated flow control (50 l/min, 1.5–3 bar).

Eye Wash Station

Integrated PremiumLine eye wash features two 45° heads, stainless ½” valve with PUSH lever, and 130 mm plate with phosphorescent marking (DIN 67510). Heads include plastic dispersion plates, rubber protectors, and sealed dust covers with flip mechanism.

Standards and Certifications

Complies with ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006, EN 15154-5:2019. Technical documentation references DIN 1988, EN 1717, BGI/GUV-I 850-0, DIN-DVGW/DVGW, and GOST-R.

Applications

Suitable for laboratories, chemical storage areas, production transfer points, container filling stations, and installations requiring body/eye wash without floor-mounted equipment.

Maintenance

Routine checks: flow rate, dynamic pressure, valve tightness, spray head cleanliness, PUSH lever function, dust cover integrity, pull rod operation, and wall flange stability.

Datasheet and documents

Description

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 1625 mm
  • Projection: 525 mm
  • Installation height: 810 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • integrated PremiumLine safety eye shower with two spray heads 45°
  • connection pipe of stainless steel for easy installation and alignment of the shower, polished, water inlet ¾” male
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of stainless steel, polished, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • high-performance spray heads made of stainless steel for large-scale dispersion of water, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • two connection pipes ¾“ of stainless steel, polished, total length 1500 mm
  • wall flange as T-version with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • connection adapter of stainless steel, polished, with integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • connection pipe ¾“ of stainless steel, polished, length 75 mm
  • ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • holder for pull rod made of stainless steel, polished
  • connection pipe ¾“ of stainless steel, polished, length 500 mm
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • wall shower arm ¾“ of stainless steel, polished, projection 525 mm
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 810 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72