Ντους Ασφαλείας σώματος B-Safety με ντους ασφαλείας οφθαλμών τύπος PremiumLine BR 871 095 B-Safety - 1
Ντους Ασφαλείας σώματος B-Safety με ντους ασφαλείας οφθαλμών τύπος PremiumLine BR 871 095 B-Safety - 1

Ντους Ασφαλείας σώματος B-Safety με ντους ασφαλείας οφθαλμών τύπος PremiumLine BR 871 095

B-Safety BR 871 095 PremiumLine

Επίτοιχος συνδυασμός ντους ασφαλείας σώματος με ντους οφθαλμών, σε ανοξείδωτη εκτέλεση PremiumLine. Η διάταξη BR 871 χρησιμοποιείται σε θέσεις όπου ο βραχίονας σώματος πρέπει να τοποθετηθεί πάνω από άνοιγμα ή σε περιορισμένη επιφάνεια τοίχου, με κοινή υδραυλική τροφοδοσία για σώμα και οφθαλμούς.

Τεχνικά δεδομένα

  • Υλικό: ανοξείδωτος χάλυβας, γυαλισμένη επιφάνεια
  • Συνολικό ύψος: 1625 mm
  • Προβολή βραχίονα: 525 mm
  • Ύψος εγκατάστασης: 810 mm
  • Είσοδος νερού: ¾” θηλυκή, με άνω/κάτω σύνδεση για γραμμή κυκλοφορίας
  • Πίεση λειτουργίας: 1,5–3 bar
  • Παροχή σώματος: 50 l/min, με εκδόσεις 75 ή 110 l/min
  • Παροχή οφθαλμών: 14 l/min σε 1,5–5 bar δυναμική πίεση

Κατασκευή και λειτουργία

Η μονάδα περιλαμβάνει ανοξείδωτες επίτοιχες φλάντζες, σωλήνες σύνδεσης ¾”, βραχίονα σώματος ¾” και σφαιρική βάνα σώματος ¾” με ενεργοποίηση μέσω ανοξείδωτης ράβδου έλξης 700 mm. Η κεφαλή καταιονισμού είναι ανοξείδωτη, αυτοαποστραγγιζόμενη, με ενσωματωμένη ρύθμιση ροής 50 l/min για λειτουργία στο εύρος 1,5–3 bar.

Ντους οφθαλμών

Το ενσωματωμένο ντους οφθαλμών PremiumLine διαθέτει δύο κεφαλές 45°, ανοξείδωτη βάνα ½” με μοχλό PUSH και πλάκα 130 mm με φωσφορίζουσα ένδειξη κατά DIN 67510. Οι κεφαλές έχουν πλαστική πλάκα διασποράς, ελαστικά προστατευτικά και στεγανοποιημένα καλύμματα σκόνης με ανακλινόμενο μηχανισμό.

Πρότυπα

Αναφέρεται συμμόρφωση με ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 και EN 15154-5:2019. Η τεχνική περιγραφή αναφέρει επίσης DIN 1988, EN 1717, BGI/GUV-I 850-0, DIN-DVGW/DVGW και GOST-R.

Εφαρμογές

Κατάλληλο για εργαστήρια, χώρους χημικής αποθήκευσης, σημεία διέλευσης σε παραγωγή, περιοχές πλήρωσης δοχείων και εγκαταστάσεις όπου απαιτείται έκπλυση σώματος/οφθαλμών χωρίς επιδαπέδια κατασκευή.

Συντήρηση

Έλεγχος παροχής, δυναμικής πίεσης, στεγανότητας βανών, καθαρότητας κεφαλών, λειτουργίας PUSH, καλυμμάτων σκόνης, ράβδου έλξης και σταθερότητας επίτοιχων φλαντζών.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: stainless steel
  • Surface: polished
  • Total height: 1625 mm
  • Projection: 525 mm
  • Installation height: 810 mm
  • Operating pressure: 1.5 to 3 bar
  • Flow rate: 50 l/min (75/110 l/min)
  • Water inlet: ¾“ female

Norms / Approvals

  • EN 15154-2:2006
  • EN 15154-2:2006
  • EN 15154-5:2019
  • ANSI Z358.1-2014
  • DIN-DVGW, DVGW, NW-0416CL0425
  • DIN-DVGW, DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The B-SAFETY body safety showers of the PremiumLine series are made of stainless steel and are just as suitable for use in laboratories and research as for rough use in industry. The polished stainless steel surface is not only resistant to many chemicals, but also offers a modern design for laboratories and clean rooms.

The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the specifications of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of calcification and maintenance, and very robust and corrosion-resistant. The limited, uniform and above all soft water jet is optimized for rinsing off chemicals on the skin.

DVGW
ISO9001_D_72

Technical Description

  • including top and bottom water inlet ¾” female for installation in circulation lines, plug ¾” of stainless steel
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • integrated PremiumLine safety eye shower with two spray heads 45°
  • connection pipe of stainless steel for easy installation and alignment of the shower, polished, water inlet ¾” male
  • ball valve ½” of stainless steel, with PUSH-lever actuation, DIN-DVGW tested and certificated
  • big push plate made of stainless steel, polished, length 130 mm, with large signal “PUSH”, luminescent according to DIN 67510
  • integrated flow regulation 14 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • high-performance spray heads made of stainless steel for large-scale dispersion of water, with plastic spray plate, largely free of calcification, with rubber sleeves and sealed dust caps with folding mechanism, mounted over distributor fork
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • two connection pipes ¾“ of stainless steel, polished, total length 1500 mm
  • wall flange as T-version with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • connection adapter of stainless steel, polished, with integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
  • connection pipe ¾“ of stainless steel, polished, length 75 mm
  • ball valve ¾” of stainless steel, with pull rod actuation, DIN-DVGW tested and certificated
  • pull rod with ring handle of stainless steel, polished, length 700 mm
  • holder for pull rod made of stainless steel, polished
  • connection pipe ¾“ of stainless steel, polished, length 500 mm
  • wall flange with 4 mounting holes of stainless steel, polished, water inlet ¾” female
  • wall shower arm ¾“ of stainless steel, polished, projection 525 mm
  • high-performance shower head of stainless steel, polished, with improved spray pattern, corrosion resistant, largely calcification- and maintenance-free, very robust, self-draining
  • sign for body safety shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 150 x 150 mm, viewing distance 15 metre
  • mounting height 810 mm (± 100 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014, EN 15154-1:2006, EN 15154-2:2006 and EN 15154-5:2019
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW    ISO9001_D_72