Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety - B-Safety
Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety - B-Safety

Hand-held eye shower with two spray head - PremiumLine -BR 719 020 | B-Safety

B-Safety PremiumLine BR 719 020 – Handheld Eyewash with Dual Spray Heads

The BR 719 020 is a stainless steel handheld emergency eyewash unit, equipped with two spray heads and designed for bench mounting. Typical installation points include laboratory workbenches, chemical dosing stations, and production areas where immediate bilateral eye irrigation is required at the hazard source.

Technical Specifications

  • Flow rate: 14 l/min
  • Minimum flow pressure: 2.5 bar
  • Operating pressure: 2.5–5 bar
  • Water connection: ½” female
  • Dimensions: 260 × 145 × 100 mm
  • Flexible hose: 1.5 m, stainless steel braided
  • Mounting height: 680 mm ±200 mm

Materials and Operation

Wet parts, handle, and spray heads are constructed from AISI 304. Flow regulator is POM. Hose fittings are brass CW617N / CW614N. The handle valve is non-self-closing to maintain continuous flow during use.

Dual spray heads provide wide water dispersion for simultaneous irrigation of both eyes and surrounding area. Integrated flow control limits output to 14 l/min and maintains spray pattern within the specified pressure range.

Standards and Network Protection

BR 719 020 is compliant with EN 15154-2:2006 and ANSI Z358.1-2014. Includes integrated non-return valve for potable water protection and certified to DIN-DVGW / DVGW NW-0417CL0263. Eyewash signage per EN ISO 7010 and ASR A1.3.

Applications

Suitable for clean network water in chemical laboratories, QC benches, water treatment units, paint shops, CIP stations, and maintenance areas with risk of exposure to acids, alkalis, cleaning agents, or airborne particulates.

Installation Options

Mounting via M28×1.5×80 mm fitting, M28×1.5 nut, two M5 screws, rosette, and O-ring seal. Optional: isolation valve, hose weight, hoses 1000–3000 mm, flow switch IP65, thermostatic mixing 20–43 °C, alarm 230 V / 50 Hz.

Datasheet and documents

Description

Technical Specifications

  • Material: Stainless steel
  • Surface: polished
  • Dimensions (H x W): 260 x 145 mm
  • Hose-Length: 1500 mm
  • Operating pressure: 2.5 to 5 bar
  • Flow rate: 14 litres / minute
  • Water inlet: ½” female

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The hand-held eye shower is equipped with two B-SAFETY high-performance shower heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

With the enclosed table mounting accessory, the hand-held eye shower can be mounted on the table. The robust stainless steel-coated hose in 1.5 meter length ensures good usability of the shower. The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure present. The backflow preventer built into the handle of the shower provides additional protection of the drinking water network.

DVGW
ISO9001_D_72

Technical Description

  • water-bearing parts made of stainless steel
  • Handle with large, adjusting push lever made of stainless steel, polished, valve not self-closing
  • high-performance spray heads made of stainless for large-scale dispersion of water, polished, with plastic spray plate, low calcification, incl. rubber sleeves and sealed dust caps with folding mechanism, mounted over distribution fork made of polished stainless steel
  • integrated automatic flow regulator 14 litres / minute for a standard-compliant blasting pattern at a specified working range of 2.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • table mounting accessories M28x1,5x80mm made of stainless steel, incl. fastening-parts kit with nut M28x1,5mm and 2 screws M5 for mounting difficult to access, chrome-plated rosette, sealing to table surface with O-Ring
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • Mounting height 680 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Certification

DVGW    ISO9001_D_72.png