Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025 - B-Safety
Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025 - B-Safety
Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025 - B-Safety
Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025 - B-Safety
Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025 - B-Safety
Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025 - B-Safety
Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025 - B-Safety
Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025 - B-Safety

Ντους οφθαλμών B-Safety με ένα ακροφύσιο ψεκασμού χειρός τύπος ClassicLine BR 712 025

B-Safety ClassicLine BR 712 025 – ντους οφθαλμών χειρός

Το BR 712 025 είναι ντους οφθαλμών χειρός με ένα ακροφύσιο ψεκασμού, κατάλληλο για εγκατάσταση σε τοίχο ή πάγκο εργασίας. Χρησιμοποιείται σε σημεία όπου απαιτείται άμεση τοπική έκπλυση των ματιών μετά από επαφή με χημικά, σκόνη, ατμούς διεργασίας ή αιωρούμενα σωματίδια.

Τεχνικά στοιχεία λειτουργίας

  • Παροχή: 7 l/min
  • Πίεση λειτουργίας: 1,5–5 bar
  • Ελάχιστη πίεση ροής: 1,5 bar
  • Σύνδεση νερού: ½” θηλυκό
  • Εύκαμπτος σωλήνας: 1,5 m, με επένδυση ανοξείδωτου χάλυβα
  • Διαστάσεις χειρολαβής/κεφαλής: 240 × 65 × 65 mm

Η ενσωματωμένη ρύθμιση ροής διατηρεί το προβλεπόμενο μοτίβο ψεκασμού εντός του καθορισμένου εύρους πίεσης. Η βαλβίδα στη χειρολαβή είναι μη αυτοκλειόμενη, ώστε η ροή να παραμένει ενεργή κατά τη διάρκεια της έκπλυσης χωρίς συνεχή πίεση από τον χρήστη.

Υλικά και επαφή με νερό

Τα υδροφόρα μέρη είναι από ορείχαλκο DZR CW724R, κατάλληλο για εγκαταστάσεις πόσιμου νερού με μειωμένο κίνδυνο αποψευδαργύρωσης. Η κεφαλή ψεκασμού και ο ρυθμιστής ροής είναι από POM, ενώ τα ρακόρ του σωλήνα είναι από ορείχαλκο CW617N / CW614N.

Πρότυπα και εγκατάσταση

Το προϊόν αναφέρεται με συμμόρφωση σε EN 15154-2:2006 και ANSI Z358.1-2014. Περιλαμβάνει αντιρρυπαντική διάταξη για προστασία του δικτύου νερού και αναφορές σε DIN 1988, EN 1717 και DIN-DVGW NW-0417CL0263. Η ενδεικτική στάθμη τοποθέτησης είναι 770 mm ±200 mm.

Βιομηχανικές εφαρμογές

Κατάλληλο για εργαστήρια χημικών, σταθμούς δοσομέτρησης, χώρους CIP, βαφεία, βιομηχανικά πλυντήρια, μονάδες HVAC/water treatment και σημεία συντήρησης όπου ο χειριστής χρειάζεται κατευθυνόμενη πλύση οφθαλμών κοντά στην πηγή κινδύνου.

Διαφορά έναντι σταθερού σταθμού

Η έκδοση χειρός επιλέγεται όταν απαιτείται ευελιξία κατεύθυνσης της ροής ή εγκατάσταση σε πάγκο. Σε περιοχές υψηλού κινδύνου με πιθανή έκθεση σώματος, πρέπει να αξιολογείται συνδυασμός με πλήρες ντους ασφαλείας.

Τεχνικά Φυλλάδια / Οδηγίες Χρήσης / Λοιπά

Περιγραφή

Technical Specifications

  • Material: brass, plastic
  • Color: grey, green, orange
  • Dimensions (H x W): 240 x 65 mm
  • Hose-Length: 1500 mm
  • Operating pressure: 1.5 to 5 bar
  • Flow rate: 7 l/min
  • Water inlet: ½” female

Norms / Approvals

  • EN 15154-2:2006
  • ANSI Z358.1-2014
  • DIN-DVGW, NW-0417CL0263
  • GOST-R, Certificate-No. 0615463 0615463

Product description

The hand-held eye shower is equipped with the B-SAFETY high-performance spray head, which not only meets the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure that the water is distributed over a large area. This also takes care of the regions around the eyes and eyes can be positioned in the water jet without problems. The restricted, even and, most important of all, soft water jet has been optimized for rinsing chemicals out of the eye.

With the enclosed B-SAFETY combination bracket, the hand-held eye shower can be mounted on the wall or also on the table. The robust stainless steel-coated hose in 1.5 meter length ensures good usability of the shower. The correct spray height and a standard-compliant spray pattern are achieved by the integrated flow regulator, regardless of the water pressure present. The backflow preventer built into the handle of the shower provides additional protection of the drinking water network.

Technical Description

  • ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
  • high-performance spray head for large-scale dispersion of water, with plastic spray plate, low calcification, with rubber sleeves and sealed dust caps
  • integrated flow regulation 7 litre / minute for a standard-compliant jet pattern at a specified working range of 1.5 to 5 bar flow pressure
  • integrated backflow preventer to protect the drinking water
  • stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
  • robust table and wall mounting bracket with positioning of the shower, accessories M28 x 1,5 x 80 mm made of stainless steel incl. fastening-parts kit with nut M28 x 1,5 mm and 2 screws M5 for mounting difficult to access, sealing to table surface with O-Ring
  • sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
  • mounting height 770 mm (± 200 mm)
  • according to BGI/GUV-I 850-0, DIN 1988 and EN 1717
  • according to ANSI Z358.1-2014 and EN 15154-2:2006
  • DIN-DVGW tested and certificated

Πιστοποιήσεις

DVGW